Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

11 files changed, 1241 insertions, 8 deletions

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 90a84c514d3d..e6e3491d48a5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -87,3 +87,14 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 62979076e250..03e3d76626dd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -50,3 +50,9 @@
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
 };
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index f4f30f674b4c..06a34dc6002f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -57,6 +57,19 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -72,3 +85,25 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 54bb7c739089..73f159370188 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -52,6 +52,19 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	usb_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 };
 
 &uart_AO {
@@ -60,3 +73,32 @@
 	pinctrl-names = "default";
 
 };
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index bf6c8d051002..610e0e1c3cee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -45,6 +45,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
@@ -99,6 +102,30 @@
 		method = "smc";
 	};
 
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -124,6 +151,25 @@
 		#size-cells = <2>;
 		ranges;
 
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
 		cbus: cbus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc1100000 0x0 0x100000>;
@@ -153,6 +199,27 @@
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x8700 0x0 0x14>;
@@ -160,6 +227,51 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_SPI>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@c4301000 {
@@ -203,6 +315,56 @@
 						function = "uart_ao";
 					};
 				};
+
+				remote_input_ao_pins: remote_input_ao {
+					mux {
+						groups = "remote_input_ao";
+						function = "remote_input_ao";
+					};
+				};
+
+				i2c_ao_pins: i2c_ao {
+					mux {
+						groups = "i2c_sck_ao",
+						       "i2c_sda_ao";
+						function = "i2c_ao";
+					};
+				};
+
+				pwm_ao_a_3_pins: pwm_ao_a_3 {
+					mux {
+						groups = "pwm_ao_a_3";
+						function = "pwm_ao_a_3";
+					};
+				};
+
+				pwm_ao_a_6_pins: pwm_ao_a_6 {
+					mux {
+						groups = "pwm_ao_a_6";
+						function = "pwm_ao_a_6";
+					};
+				};
+
+				pwm_ao_a_12_pins: pwm_ao_a_12 {
+					mux {
+						groups = "pwm_ao_a_12";
+						function = "pwm_ao_a_12";
+					};
+				};
+
+				pwm_ao_b_pins: pwm_ao_b {
+					mux {
+						groups = "pwm_ao_b";
+						function = "pwm_ao_b";
+					};
+				};
+			};
+
+			clkc_AO: clock-controller@040 {
+				compatible = "amlogic,gxbb-aoclkc";
+				reg = <0x0 0x00040 0x0 0x4>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			uart_AO: serial@4c0 {
@@ -212,6 +374,30 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			pwm_ab_AO: pwm@550 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x0550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_AO_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		periphs: periphs@c8834000 {
@@ -251,6 +437,16 @@
 					};
 				};
 
+				nor_pins: nor {
+					mux {
+						groups = "nor_d",
+						       "nor_q",
+						       "nor_c",
+						       "nor_cs";
+						function = "nor";
+					};
+				};
+
 				sdcard_pins: sdcard {
 					mux {
 						groups = "sdcard_d0",
@@ -263,6 +459,25 @@
 					};
 				};
 
+				sdio_pins: sdio {
+					mux {
+						groups = "sdio_d0",
+						       "sdio_d1",
+						       "sdio_d2",
+						       "sdio_d3",
+						       "sdio_cmd",
+						       "sdio_clk";
+						function = "sdio";
+					};
+				};
+
+				sdio_irq_pins: sdio_irq {
+					mux {
+						groups = "sdio_irq";
+						function = "sdio";
+					};
+				};
+
 				uart_a_pins: uart_a {
 					mux {
 						groups = "uart_tx_a",
@@ -287,6 +502,30 @@
 					};
 				};
 
+				i2c_a_pins: i2c_a {
+					mux {
+						groups = "i2c_sck_a",
+						       "i2c_sda_a";
+						function = "i2c_a";
+					};
+				};
+
+				i2c_b_pins: i2c_b {
+					mux {
+						groups = "i2c_sck_b",
+						       "i2c_sda_b";
+						function = "i2c_b";
+					};
+				};
+
+				i2c_c_pins: i2c_c {
+					mux {
+						groups = "i2c_sck_c",
+						       "i2c_sda_c";
+						function = "i2c_c";
+					};
+				};
+
 				eth_pins: eth_c {
 					mux {
 						groups = "eth_mdio",
@@ -306,6 +545,55 @@
 						function = "eth";
 					};
 				};
+
+				pwm_a_x_pins: pwm_a_x {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a_x";
+					};
+				};
+
+				pwm_a_y_pins: pwm_a_y {
+					mux {
+						groups = "pwm_a_y";
+						function = "pwm_a_y";
+					};
+				};
+
+				pwm_b_pins: pwm_b {
+					mux {
+						groups = "pwm_b";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_d_pins: pwm_d {
+					mux {
+						groups = "pwm_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins: pwm_e {
+					mux {
+						groups = "pwm_e";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_x_pins: pwm_f_x {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f_x";
+					};
+				};
+
+				pwm_f_y_pins: pwm_f_y {
+					mux {
+						groups = "pwm_f_y";
+						function = "pwm_f_y";
+					};
+				};
 			};
 		};
 
@@ -321,6 +609,15 @@
 				#clock-cells = <1>;
 				reg = <0x0 0x0 0x0 0x3db>;
 			};
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
 		};
 
 		apb: apb@d0000000 {
@@ -331,14 +628,40 @@
 			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 		};
 
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
 		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 			reg = <0x0 0xc9410000 0x0 0x10000
 			       0x0 0xc8834540 0x0 0x4>;
 			interrupts = <0 8 1>;
 			interrupt-names = "macirq";
-			clocks = <&xtal>;
-			clock-names = "stmmaceth";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
 			phy-mode = "rgmii";
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 17139f7003a6..eb72830ec9eb 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
new file mode 100644
index 000000000000..bcb11a868343
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -0,0 +1,328 @@
+/*
+ * Device Tree Source for the H3ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas H3ULCB board based on r8a7795";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	avb_pins: avb {
+		groups = "avb_mdc";
+		function = "avb";
+	};
+
+	sdhi0_pins_3v3: sd0_3v3 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins_3v3>;
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <900>;
+		rxdv-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		txc-skew-ps = <900>;
+		txen-skew-ps = <0>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 98f02631a0f0..b1eab6876f8c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -110,6 +110,17 @@
 			  1800000 0>;
 	};
 
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	audio_clkout: audio_clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
@@ -135,6 +146,52 @@
 			sound-dai = <&ak4613>;
 		};
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
 };
 
 &extal_clk {
@@ -172,6 +229,11 @@
 		function = "avb";
 	};
 
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -193,6 +255,11 @@
 		function = "audio_clk";
 	};
 
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -369,6 +436,14 @@
 	status = "okay";
 };
 
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
 &usb2_phy1 {
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
@@ -383,6 +458,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -391,6 +470,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
@@ -399,6 +482,10 @@
 	status = "okay";
 };
 
+&hsusb {
+	status = "okay";
+};
+
 &pcie_bus_clk {
 	clock-frequency = <100000000>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index b902356873c2..8c15040f2540 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -328,7 +328,8 @@
 		};
 
 		audma0: dma-controller@ec700000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
 			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
@@ -360,7 +361,8 @@
 		};
 
 		audma1: dma-controller@ec720000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
 			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
@@ -1098,6 +1100,7 @@
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1107,6 +1110,7 @@
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1116,8 +1120,8 @@
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1126,8 +1130,8 @@
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1224,6 +1228,23 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a7795";
 			reg = <0 0xfe000000 0 0x80000>;
@@ -1273,5 +1294,252 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf2: fcp@fe952000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe952000 0 0x200>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi2: vsp@fe9c0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9c0000 0 0x8000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi2>;
+		};
+
+		fcpvi2: fcp@fe9cf000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9cf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 609>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x4000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x4000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd3: vsp@fea38000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea38000 0 0x4000>;
+			interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd3>;
+		};
+
+		fcpvd3: fcp@fea3f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea3f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 600>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fdp1@fe948000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe948000 0 0x2400>;
+			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 117>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf2>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>,
+			      <0 0xfeb90000 0 0x14>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>,
+				 <&cpg CPG_MOD 721>,
+				 <&cpg CPG_MOD 727>;
+			clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			status = "disabled";
+
+			vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index e72be3856d79..13db7d61c26c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -31,11 +31,27 @@
 	};
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+};
+
 &extal_clk {
 	clock-frequency = <16666666>;
 };
 
 &scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1edf82440d78..9217da983525 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -107,6 +107,123 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7796-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;