arm64: dts: add support for Macchiatobin Single Shot board

Add DT support for the Macchiatobin Single Shot board from SolidRun,
which is similar to the Double Shot board, but does not have the
10G 3310 PHYs - the two ethernet ports are instead connected directly
to the SFP+ cages.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

4 files changed, 380 insertions, 329 deletions

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index eca8bac6303a..2eff1f927471 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
new file mode 100644
index 000000000000..c3e18fd5bc27
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin Single-shot";
+	compatible = "marvell,armada8040-mcbin-singleshot",
+			"marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	managed = "in-band-status";
+	sfp = <&sfp_eth1>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 56fa44860909..d06f5ab7ddab 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -5,226 +5,13 @@
  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
  */
 
-#include "armada-8040.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "armada-8040-mcbin.dtsi"
 
 / {
-	model = "Marvell 8040 MACCHIATOBin";
-	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+	model = "Marvell 8040 MACCHIATOBin Double-shot";
+	compatible = "marvell,armada8040-mcbin-doubleshot",
+			"marvell,armada8040-mcbin", "marvell,armada8040",
 			"marvell,armada-ap806-quad", "marvell,armada-ap806";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	aliases {
-		ethernet0 = &cp0_eth0;
-		ethernet1 = &cp1_eth0;
-		ethernet2 = &cp1_eth1;
-		ethernet3 = &cp1_eth2;
-	};
-
-	/* Regulator labels correspond with schematics */
-	v_3_3: regulator-3-3v {
-		compatible = "regulator-fixed";
-		regulator-name = "v_3_3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		status = "okay";
-	};
-
-	v_vddo_h: regulator-1-8v {
-		compatible = "regulator-fixed";
-		regulator-name = "v_vddo_h";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		status = "okay";
-	};
-
-	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_xhci_vbus_pins>;
-		regulator-name = "v_5v0_usb3_hst_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		status = "okay";
-	};
-
-	usb3h0_phy: usb3_phy0 {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&v_5v0_usb3_hst_vbus>;
-	};
-
-	sfp_eth0: sfp-eth0 {
-		/* CON15,16 - CPM lane 4 */
-		compatible = "sff,sfp";
-		i2c-bus = <&sfpp0_i2c>;
-		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp1_sfpp0_pins>;
-	};
-
-	sfp_eth1: sfp-eth1 {
-		/* CON17,18 - CPS lane 4 */
-		compatible = "sff,sfp";
-		i2c-bus = <&sfpp1_i2c>;
-		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
-	};
-
-	sfp_eth3: sfp-eth3 {
-		/* CON13,14 - CPS lane 5 */
-		compatible = "sff,sfp";
-		i2c-bus = <&sfp_1g_i2c>;
-		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&ap_sdhci0 {
-	bus-width = <8>;
-	/*
-	 * Not stable in HS modes - phy needs "more calibration", so add
-	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
-	 */
-	marvell,xenon-phy-slow-mode;
-	no-1-8-v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	status = "okay";
-	vqmmc-supply = <&v_vddo_h>;
-};
-
-&cp0_i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c0_pins>;
-	status = "okay";
-};
-
-&cp0_i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c1_pins>;
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		sfpp0_i2c: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-		sfpp1_i2c: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-		sfp_1g_i2c: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-	};
-};
-
-/* J25 UART header */
-&cp0_uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_uart1_pins>;
-	status = "okay";
-};
-
-&cp0_mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_ge_mdio_pins>;
-	status = "okay";
-
-	ge_phy: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cp0_pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_pcie_pins>;
-	num-lanes = <4>;
-	num-viewport = <8>;
-	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&cp0_pinctrl {
-	cp0_ge_mdio_pins: ge-mdio-pins {
-		marvell,pins = "mpp32", "mpp34";
-		marvell,function = "ge";
-	};
-	cp0_i2c1_pins: i2c1-pins {
-		marvell,pins = "mpp35", "mpp36";
-		marvell,function = "i2c1";
-	};
-	cp0_i2c0_pins: i2c0-pins {
-		marvell,pins = "mpp37", "mpp38";
-		marvell,function = "i2c0";
-	};
-	cp0_uart1_pins: uart1-pins {
-		marvell,pins = "mpp40", "mpp41";
-		marvell,function = "uart1";
-	};
-	cp0_xhci_vbus_pins: xhci0-vbus-pins {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-	cp0_sfp_1g_pins: sfp-1g-pins {
-		marvell,pins = "mpp51", "mpp53", "mpp54";
-		marvell,function = "gpio";
-	};
-	cp0_pcie_pins: pcie-pins {
-		marvell,pins = "mpp52";
-		marvell,function = "gpio";
-	};
-	cp0_sdhci_pins: sdhci-pins {
-		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
-			       "mpp60", "mpp61";
-		marvell,function = "sdio";
-	};
-	cp0_sfpp1_pins: sfpp1-pins {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
 };
 
 &cp0_xmdio {
@@ -243,46 +30,11 @@
 	};
 };
 
-&cp0_ethernet {
-	status = "okay";
-};
-
 &cp0_eth0 {
 	status = "okay";
 	/* Network PHY */
 	phy = <&phy0>;
 	phy-mode = "10gbase-kr";
-	/* Generic PHY, providing serdes lanes */
-	phys = <&cp0_comphy4 0>;
-};
-
-&cp0_sata0 {
-	/* CPM Lane 0 - U29 */
-	status = "okay";
-};
-
-&cp0_sdhci0 {
-	/* U6 */
-	broken-cd;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_sdhci_pins>;
-	status = "okay";
-	vqmmc-supply = <&v_3_3>;
-};
-
-&cp0_usb3_0 {
-	/* J38? - USB2.0 only */
-	status = "okay";
-};
-
-&cp0_usb3_1 {
-	/* J38? - USB2.0 only */
-	status = "okay";
-};
-
-&cp1_ethernet {
-	status = "okay";
 };
 
 &cp1_eth0 {
@@ -290,81 +42,4 @@
 	/* Network PHY */
 	phy = <&phy8>;
 	phy-mode = "10gbase-kr";
-	/* Generic PHY, providing serdes lanes */
-	phys = <&cp1_comphy4 0>;
-};
-
-&cp1_eth1 {
-	/* CPS Lane 0 - J5 (Gigabit RJ45) */
-	status = "okay";
-	/* Network PHY */
-	phy = <&ge_phy>;
-	phy-mode = "sgmii";
-	/* Generic PHY, providing serdes lanes */
-	phys = <&cp1_comphy0 1>;
-};
-
-&cp1_eth2 {
-	/* CPS Lane 5 */
-	status = "okay";
-	/* Network PHY */
-	phy-mode = "2500base-x";
-	managed = "in-band-status";
-	/* Generic PHY, providing serdes lanes */
-	phys = <&cp1_comphy5 2>;
-	sfp = <&sfp_eth3>;
-};
-
-&cp1_pinctrl {
-	cp1_sfpp1_pins: sfpp1-pins {
-		marvell,pins = "mpp8", "mpp10", "mpp11";
-		marvell,function = "gpio";
-	};
-	cp1_spi1_pins: spi1-pins {
-		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
-		marvell,function = "spi1";
-	};
-	cp1_uart0_pins: uart0-pins {
-		marvell,pins = "mpp6", "mpp7";
-		marvell,function = "uart0";
-	};
-	cp1_sfp_1g_pins: sfp-1g-pins {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-	cp1_sfpp0_pins: sfpp0-pins {
-		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
-		marvell,function = "gpio";
-	};
-};
-
-/* J27 UART header */
-&cp1_uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp1_uart0_pins>;
-	status = "okay";
-};
-
-&cp1_sata0 {
-	/* CPS Lane 1 - U32 */
-	/* CPS Lane 3 - U31 */
-	status = "okay";
-};
-
-&cp1_spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp1_spi1_pins>;
-	status = "okay";
-
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&cp1_usb3_0 {
-	/* CPS Lane 2 - CON7 */
-	usb-phy = <&usb3h0_phy>;
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
new file mode 100644
index 000000000000..29ea7e81ec4c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin";
+	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp1_eth1;
+		ethernet3 = &cp1_eth2;
+	};
+
+	/* Regulator labels correspond with schematics */
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_vddo_h: regulator-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_vddo_h";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	usb3h0_phy: usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+
+	sfp_eth0: sfp-eth0 {
+		/* CON15,16 - CPM lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp0_i2c>;
+		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp0_pins>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		/* CON17,18 - CPS lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp1_i2c>;
+		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+	};
+
+	sfp_eth3: sfp-eth3 {
+		/* CON13,14 - CPS lane 5 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_1g_i2c>;
+		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		sfpp1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		sfp_1g_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+	};
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart1_pins>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_pins>;
+	num-lanes = <4>;
+	num-viewport = <8>;
+	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cp0_uart1_pins: uart1-pins {
+		marvell,pins = "mpp40", "mpp41";
+		marvell,function = "uart1";
+	};
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cp0_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp51", "mpp53", "mpp54";
+		marvell,function = "gpio";
+	};
+	cp0_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+	cp0_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+	/* CPM Lane 0 - U29 */
+	status = "okay";
+};
+
+&cp0_sdhci0 {
+	/* U6 */
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+	/* J38? - USB2.0 only */
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	/* J38? - USB2.0 only */
+	status = "okay";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+	/* CPS Lane 0 - J5 (Gigabit RJ45) */
+	status = "okay";
+	/* Network PHY */
+	phy = <&ge_phy>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+	/* CPS Lane 5 */
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy5 2>;
+	sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+	cp1_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp8", "mpp10", "mpp11";
+		marvell,function = "gpio";
+	};
+	cp1_spi1_pins: spi1-pins {
+		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+	cp1_uart0_pins: uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+	cp1_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+	cp1_sfpp0_pins: sfpp0-pins {
+		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_uart0_pins>;
+	status = "okay";
+};
+
+&cp1_sata0 {
+	/* CPS Lane 1 - U32 */
+	/* CPS Lane 3 - U31 */
+	status = "okay";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&cp1_usb3_0 {
+	/* CPS Lane 2 - CON7 */
+	usb-phy = <&usb3h0_phy>;
+	status = "okay";
+};