summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 07:45:16 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 07:45:16 -0800
commitd07e43d70eef15a44a2c328a913d8d633a90e088 (patch)
tree7a7cac7c90f4b8f19edfb2aecfa27d77e266eafc /arch/arm/plat-omap/include
parent1ebaf4f4e6912199f8a4e30ba3ab55da2b71bcdf (diff)
parent3af08bd7adb09b0806c51c06b87db08cc7075568 (diff)
Merge branch 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM OMAP serial updates from Russell King: "This series is a major reworking of the OMAP serial driver code fixing various bugs in the hardware-assisted flow control, extending up into serial_core for a couple of issues. These fixes have been done as a set of progressive changes and transformations in the hope that no new bugs will be introduced by this series. The problems are many-fold, from the driver not being informed about updated settings, to the driver not knowing what the intentions of the upper layers are. The first four patches tackle the serial_core layer, allowing it to provide the necessary information to drivers, and the remaining patches allow the OMAP serial driver to take advantage of this. This brings hardware assisted RTS/CTS and XON/OFF flow control into a useful state. These patches have been in linux-next for most of the last cycle; indeed they predate the previous merge window. They've also been posted to the OMAP people." * 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm: (21 commits) SERIAL: omap: fix hardware assisted flow control SERIAL: omap: simplify (2) SERIAL: omap: move xon/xoff setting earlier SERIAL: omap: always set TCR SERIAL: omap: simplify SERIAL: omap: don't read back LCR/MCR/EFR SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios SERIAL: omap: configure xon/xoff before setting modem control lines SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR SERIAL: omap: move driver private definitions and structures to driver SERIAL: omap: remove 'irq_pending' bitfield SERIAL: omap: fix MCR TCRTLR bit handling SERIAL: omap: fix set_mctrl() breakage SERIAL: omap: no need to re-read EFR SERIAL: omap: remove setting of EFR SCD bit SERIAL: omap: allow hardware assisted IXANY mode to be disabled SERIAL: omap: allow hardware assisted rts/cts modes to be disabled SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control SERIAL: core: add hardware assisted h/w flow control support SERIAL: core: add hardware assisted s/w flow control support ... Conflicts: drivers/tty/serial/omap-serial.c
Diffstat (limited to 'arch/arm/plat-omap/include')
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h55
1 files changed, 0 insertions, 55 deletions
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1957a8516e93..ff9b0aab5281 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -30,35 +30,6 @@
*/
#define OMAP_SERIAL_NAME "ttyO"
-#define OMAP_MODE13X_SPEED 230400
-
-#define OMAP_UART_SCR_TX_EMPTY 0x08
-
-/* WER = 0x7F
- * Enable module level wakeup in WER reg
- */
-#define OMAP_UART_WER_MOD_WKUP 0X7F
-
-/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
-
-/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
-
-#define OMAP_UART_SYSC_RESET 0X07
-#define OMAP_UART_TCR_TRIG 0X0F
-#define OMAP_UART_SW_CLR 0XF0
-#define OMAP_UART_FIFO_CLR 0X06
-
-#define OMAP_UART_DMA_CH_FREE -1
-
-#define OMAP_MAX_HSUART_PORTS 6
-
-#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
-
-#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
-#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
-
struct omap_uart_port_info {
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
@@ -77,30 +48,4 @@ struct omap_uart_port_info {
void (*enable_wakeup)(struct device *, bool);
};
-struct uart_omap_dma {
- u8 uart_dma_tx;
- u8 uart_dma_rx;
- int rx_dma_channel;
- int tx_dma_channel;
- dma_addr_t rx_buf_dma_phys;
- dma_addr_t tx_buf_dma_phys;
- unsigned int uart_base;
- /*
- * Buffer for rx dma.It is not required for tx because the buffer
- * comes from port structure.
- */
- unsigned char *rx_buf;
- unsigned int prev_rx_dma_pos;
- int tx_buf_size;
- int tx_dma_used;
- int rx_dma_used;
- spinlock_t tx_lock;
- spinlock_t rx_lock;
- /* timer to poll activity on rx dma */
- struct timer_list rx_timer;
- unsigned int rx_buf_size;
- unsigned int rx_poll_rate;
- unsigned int rx_timeout;
-};
-
#endif /* __OMAP_SERIAL_H__ */