Merge branch 'late/kirkwood' into late/soc

Merge in the late Kirkwood branch with the OMAP late branch for upstream
submission.

Final contents described in shared tag.

Fixup remove/change conflicts in arch/arm/mach-omap2/devices.c and
drivers/spi/spi-omap2-mcspi.c.

Signed-off-by: Olof Johansson <olof@lixom.net>

28 files changed, 3 insertions, 1276 deletions

diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
deleted file mode 100644
index ad6f865d1f16..000000000000
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-ams-delta.h
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
-#define __ASM_ARCH_OMAP_AMS_DELTA_H
-
-#if defined (CONFIG_MACH_AMS_DELTA)
-
-#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
-#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
-
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
-#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
-#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
-#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
-#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
-#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
-#define AMS_DELTA_GPIO_PIN_CONFIG	11
-#define AMS_DELTA_GPIO_PIN_NAND_RB	12
-
-#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
-#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
-#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
-#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
-#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
-#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
-#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
-#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
-#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
-#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
-#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
-#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
-#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
-
-#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
-#define AMS_DELTA_LATCH2_NGPIO		16
-
-#ifndef __ASSEMBLY__
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
-#define ams_delta_latch2_write(mask, value) \
-	ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
-			AMS_DELTA_LATCH2_NGPIO, (mask), (value))
-#endif
-
-#endif /* CONFIG_MACH_AMS_DELTA */
-
-#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h
deleted file mode 100644
index 355adbdaae33..000000000000
--- a/arch/arm/plat-omap/include/plat/board-sx1.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Siemens SX1 board definitions
- *
- * Copyright: Vovan888 at gmail com
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
-#define __ASM_ARCH_SX1_I2C_CHIPS_H
-
-#define SOFIA_MAX_LIGHT_VAL	0x2B
-
-#define SOFIA_I2C_ADDR		0x32
-/* Sofia reg 3 bits masks */
-#define SOFIA_POWER1_REG	0x03
-
-#define	SOFIA_USB_POWER		0x01
-#define	SOFIA_MMC_POWER		0x04
-#define	SOFIA_BLUETOOTH_POWER	0x08
-#define	SOFIA_MMILIGHT_POWER	0x20
-
-#define SOFIA_POWER2_REG	0x04
-#define SOFIA_BACKLIGHT_REG	0x06
-#define SOFIA_KEYLIGHT_REG	0x07
-#define SOFIA_DIMMING_REG	0x09
-
-
-/* Function Prototypes for SX1 devices control on I2C bus */
-
-int sx1_setbacklight(u8 backlight);
-int sx1_getbacklight(u8 *backlight);
-int sx1_setkeylight(u8 keylight);
-int sx1_getkeylight(u8 *keylight);
-
-int sx1_setmmipower(u8 onoff);
-int sx1_setusbpower(u8 onoff);
-int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
-int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
-
-/* MMC prototypes */
-
-extern void sx1_mmc_init(void);
-extern void sx1_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h
deleted file mode 100644
index 27916b210f57..000000000000
--- a/arch/arm/plat-omap/include/plat/board-voiceblue.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /*  __ASM_ARCH_VOICEBLUE_H */
-
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
deleted file mode 100644
index a4edbd2f7484..000000000000
--- a/arch/arm/plat-omap/include/plat/debug-devices.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _OMAP_DEBUG_DEVICES_H
-#define _OMAP_DEBUG_DEVICES_H
-
-#include <linux/types.h>
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
deleted file mode 100644
index 5927709b1908..000000000000
--- a/arch/arm/plat-omap/include/plat/dsp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __OMAP_DSP_H__
-#define __OMAP_DSP_H__
-
-#include <linux/types.h>
-
-struct omap_dsp_platform_data {
-	void (*dsp_set_min_opp) (u8 opp_id);
-	u8 (*dsp_get_opp) (void);
-	void (*cpu_set_freq) (unsigned long f);
-	unsigned long (*cpu_get_freq) (void);
-	unsigned long mpu_speed[6];
-
-	/* functions to write and read PRCM registers */
-	void (*dsp_prm_write)(u32, s16 , u16);
-	u32 (*dsp_prm_read)(s16 , u16);
-	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
-	void (*dsp_cm_write)(u32, s16 , u16);
-	u32 (*dsp_cm_read)(s16 , u16);
-	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
-
-	void (*set_bootaddr)(u32);
-	void (*set_bootmode)(u8);
-
-	phys_addr_t phys_mempool_base;
-	phys_addr_t phys_mempool_size;
-};
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-extern void omap_dsp_reserve_sdram_memblock(void);
-#else
-static inline void omap_dsp_reserve_sdram_memblock(void) { }
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
deleted file mode 100644
index 0d88499b79e9..000000000000
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Flash support for OMAP1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_FLASH_H
-#define __OMAP_FLASH_H
-
-#include <linux/mtd/map.h>
-
-struct platform_device;
-extern void omap1_set_vpp(struct platform_device *pdev, int enable);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
deleted file mode 100644
index b64fbee4d567..000000000000
--- a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96	(1 << 4)
-#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
-	int	cs;
-	int	gpio_irq;
-	int	gpio_pwrdwn;
-	int	gpio_reset;
-	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
-	u32	flags;
-	int	(*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
-	defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data	NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
deleted file mode 100644
index ea6c9c88c725..000000000000
--- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
-
-struct omap_smsc911x_platform_data {
-	int	id;
-	int	cs;
-	int	gpio_irq;
-	int	gpio_reset;
-	u32	flags;
-};
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
-
-#else
-
-static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
-{
-}
-
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/hdq1w.h b/arch/arm/plat-omap/include/plat/hdq1w.h
deleted file mode 100644
index 0c1efc846d8d..000000000000
--- a/arch/arm/plat-omap/include/plat/hdq1w.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Shared macros and function prototypes for the HDQ1W/1-wire IP block
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-
-#include <plat/omap_hwmod.h>
-
-/*
- * XXX A future cleanup patch should modify
- * drivers/w1/masters/omap_hdq.c to use these macros
- */
-#define HDQ_CTRL_STATUS_OFFSET			0x0c
-#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT	5
-
-
-extern int omap_hdq1w_reset(struct omap_hwmod *oh);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/plat-omap/include/plat/irda.h
deleted file mode 100644
index 40f60339d1c6..000000000000
--- a/arch/arm/plat-omap/include/plat/irda.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/irda.h
- *
- *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL		1	/* Selects IrDA */
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-#define IR_MIRMODE	8
-
-struct omap_irda_config {
-	int transceiver_cap;
-	int (*transceiver_mode)(struct device *dev, int mode);
-	int (*select_irda)(struct device *dev, int state);
-	int rx_channel;
-	int tx_channel;
-	unsigned long dest_start;
-	unsigned long src_start;
-	int tx_trigger;
-	int rx_trigger;
-	int mode;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
deleted file mode 100644
index a6b21eddb212..000000000000
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/keypad.h
- *
- *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-#ifndef CONFIG_ARCH_OMAP1
-#warning Please update the board to use matrix-keypad driver
-#define omap_readw(reg)		0
-#define omap_writew(val, reg)	do {} while (0)
-#endif
-#include <linux/input/matrix_keypad.h>
-
-struct omap_kp_platform_data {
-	int rows;
-	int cols;
-	const struct matrix_keymap_data *keymap_data;
-	bool rep;
-	unsigned long delay;
-	bool dbounce;
-	/* specific to OMAP242x*/
-	unsigned int *row_gpios;
-	unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. Two free bits, not used by neither row/col nor keynum,
- * must be available for use as group bits. The below GROUP_SHIFT
- * macro definition is based on some prior knowledge of the
- * matrix_keypad defined KEY() macro internals.
- */
-#define GROUP_SHIFT	14
-#define GROUP_0		(0 << GROUP_SHIFT)
-#define GROUP_1		(1 << GROUP_SHIFT)
-#define GROUP_2		(2 << GROUP_SHIFT)
-#define GROUP_3		(3 << GROUP_SHIFT)
-#define GROUP_MASK	GROUP_3
-#if KEY_MAX & GROUP_MASK
-#error Group bits in conflict with keynum bits
-#endif
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h
deleted file mode 100644
index b8b5641379b0..000000000000
--- a/arch/arm/plat-omap/include/plat/l3_2xxx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-
-/* L3 CONNIDs */
-/* Display Sub system (DSS) */
-#define OMAP2_L3_CORE_FW_CONNID_DSS			8
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h
deleted file mode 100644
index cde1938c5f82..000000000000
--- a/arch/arm/plat-omap/include/plat/l3_3xxx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
-
-/* L3 Initiator IDs */
-/* Display Sub system (DSS) */
-#define OMAP3_L3_CORE_FW_INIT_ID_DSS			29
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h
deleted file mode 100644
index 3f39cf8a35c6..000000000000
--- a/arch/arm/plat-omap/include/plat/l4_2xxx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-
-/* L4 CORE */
-/* Display Sub system (DSS) */
-#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION			28
-#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION			29
-#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION			30
-#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION			31
-#define OMAP2420_L4_CORE_FW_DSS_TA_REGION			32
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
deleted file mode 100644
index 881a858b1ffc..000000000000
--- a/arch/arm/plat-omap/include/plat/l4_3xxx.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
-
-/* L4 CORE */
-#define OMAP3_L4_CORE_FW_I2C1_REGION				21
-#define OMAP3_L4_CORE_FW_I2C1_TA_REGION				22
-#define OMAP3_L4_CORE_FW_I2C2_REGION				23
-#define OMAP3_L4_CORE_FW_I2C2_TA_REGION				24
-#define OMAP3_L4_CORE_FW_I2C3_REGION				73
-#define OMAP3_L4_CORE_FW_I2C3_TA_REGION				74
-
-/* Display Sub system (DSS) */
-#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP				2
-
-#define OMAP3_L4_CORE_FW_DSS_DSI_REGION				104
-#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION			3
-#define OMAP3_L4_CORE_FW_DSS_CORE_REGION			4
-#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION			4
-#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION			5
-#define OMAP3_L4_CORE_FW_DSS_VENC_REGION			6
-#define OMAP3_L4_CORE_FW_DSS_TA_REGION				7
-#endif
diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
deleted file mode 100644
index 8e52c6572281..000000000000
--- a/arch/arm/plat-omap/include/plat/lcd_mipid.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __LCD_MIPID_H
-#define __LCD_MIPID_H
-
-enum mipid_test_num {
-	MIPID_TEST_RGB_LINES,
-};
-
-enum mipid_test_result {
-	MIPID_TEST_SUCCESS,
-	MIPID_TEST_INVALID,
-	MIPID_TEST_FAILED,
-};
-
-#ifdef __KERNEL__
-
-struct mipid_platform_data {
-	int	nreset_gpio;
-	int	data_lines;
-
-	void	(*shutdown)(struct mipid_platform_data *pdata);
-	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
-				     int level);
-	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
-	int	(*get_bklight_max)(struct mipid_platform_data *pdata);
-};
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
deleted file mode 100644
index 18814127809a..000000000000
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-
-#define MCBSP_CONFIG_TYPE2	0x2
-#define MCBSP_CONFIG_TYPE3	0x3
-#define MCBSP_CONFIG_TYPE4	0x4
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	struct omap_mcbsp_ops *ops;
-	u16 buffer_size;
-	u8 reg_size;
-	u8 reg_step;
-
-	/* McBSP platform and instance specific features */
-	bool has_wakeup; /* Wakeup capability */
-	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
-	int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
-	int (*mux_signal)(struct device *dev, const char *signal, const char *src);
-};
-
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
-	const char *sidetone;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
deleted file mode 100644
index a357eb26bd25..000000000000
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _OMAP2_MCSPI_H
-#define _OMAP2_MCSPI_H
-
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
-#define OMAP4_MCSPI_REG_OFFSET 0x100
-
-struct omap2_mcspi_platform_config {
-	unsigned short	num_cs;
-	unsigned int regs_offset;
-};
-
-struct omap2_mcspi_dev_attr {
-	unsigned short num_chipselect;
-};
-
-struct omap2_mcspi_device_config {
-	unsigned turbo_mode:1;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
deleted file mode 100644
index 323948959200..000000000000
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
-					.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- *   as mux config
- */
-#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
-	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-struct pin_config {
-	char 			*name;
-	const unsigned int 	mux_reg;
-	unsigned char		debug;
-
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-
-#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-	const char *mux_reg_name;
-#endif
-
-};
-
-enum omap7xx_index {
-	/* OMAP 730 keyboard */
-	E2_7XX_KBR0,
-	J7_7XX_KBR1,
-	E1_7XX_KBR2,
-	F3_7XX_KBR3,
-	D2_7XX_KBR4,
-	C2_7XX_KBC0,
-	D3_7XX_KBC1,
-	E4_7XX_KBC2,
-	F4_7XX_KBC3,
-	E3_7XX_KBC4,
-
-	/* USB */
-	AA17_7XX_USB_DM,
-	W16_7XX_USB_PU_EN,
-	W17_7XX_USB_VBUSI,
-	W18_7XX_USB_DMCK_OUT,
-	W19_7XX_USB_DCRST,
-
-	/* MMC */
-	MMC_7XX_CMD,
-	MMC_7XX_CLK,
-	MMC_7XX_DAT0,
-
-	/* I2C */
-	I2C_7XX_SCL,
-	I2C_7XX_SDA,
-
-	/* SPI */
-	SPI_7XX_1,
-	SPI_7XX_2,
-	SPI_7XX_3,
-	SPI_7XX_4,
-	SPI_7XX_5,
-	SPI_7XX_6,
-
-	/* UART */
-	UART_7XX_1,
-	UART_7XX_2,
-};
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-extern int omap2_mux_init(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
deleted file mode 100644
index 1a68c1e5fe53..000000000000
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/gpmc.h>
-#include <linux/mtd/partitions.h>
-
-enum nand_io {
-	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
-	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
-	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
-	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
-};
-
-struct omap_nand_platform_data {
-	int			cs;
-	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
-	int			nr_parts;
-	bool			dev_ready;
-	enum nand_io		xfer_type;
-	int			devsize;
-	enum omap_ecc           ecc_opt;
-	struct gpmc_nand_regs	reg;
-};
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index a531149823bb..b2eac60b6904 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -21,8 +21,6 @@
 #include <linux/device.h>
 #include <linux/pm_qos.h>
 
-#include <plat/mux.h>
-
 #define DRIVER_NAME	"omap_uart"
 
 /*
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
deleted file mode 100644
index 20de0d5a7e77..000000000000
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-
-struct omap_board_data;
-
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
-				struct omap_board_data *);
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 27bcc2441195..106f50665804 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -60,6 +60,7 @@ extern struct dev_pm_domain omap_device_pm_domain;
  * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
+ * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
  *
  * Integrates omap_hwmod data into Linux platform_device.
  *
@@ -73,6 +74,7 @@ struct omap_device {
 	struct omap_device_pm_latency	*pm_lats;
 	u32				dev_wakeup_lat;
 	u32				_dev_wakeup_lat_limit;
+	unsigned long			_driver_status;
 	u8				pm_lats_cnt;
 	s8				pm_lat_level;
 	u8				hwmods_cnt;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 09e14ce3ec57..b3349f7b1a2c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -630,6 +630,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
 
 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
 int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
 				   const char *name, struct resource *res);
 
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
deleted file mode 100644
index 2858667d2e4f..000000000000
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define ONENAND_SYNC_READ	(1 << 0)
-#define ONENAND_SYNC_READWRITE	(1 << 1)
-
-struct onenand_freq_info {
-	u16			maf_id;
-	u16			dev_id;
-	u16			ver_id;
-};
-
-struct omap_onenand_platform_data {
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
-	int		(*get_freq)(const struct onenand_freq_info *freq_info,
-				    bool *clk_dep);
-	int			dma_channel;
-	u8			flags;
-	u8			regulator_can_sleep;
-	u8			skip_initial_unlocking;
-};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data	NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h
deleted file mode 100644
index 1eb4dc326979..000000000000
--- a/arch/arm/plat-omap/include/plat/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ	CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h
deleted file mode 100644
index b10eac89e2e9..000000000000
--- a/arch/arm/plat-omap/include/plat/remoteproc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Remote Processor - omap-specific bits
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PLAT_REMOTEPROC_H
-#define _PLAT_REMOTEPROC_H
-
-struct rproc_ops;
-struct platform_device;
-
-/*
- * struct omap_rproc_pdata - omap remoteproc's platform data
- * @name: the remoteproc's name
- * @oh_name: omap hwmod device
- * @oh_name_opt: optional, secondary omap hwmod device
- * @firmware: name of firmware file to load
- * @mbox_name: name of omap mailbox device to use with this rproc
- * @ops: start/stop rproc handlers
- * @device_enable: omap-specific handler for enabling a device
- * @device_shutdown: omap-specific handler for shutting down a device
- */
-struct omap_rproc_pdata {
-	const char *name;
-	const char *oh_name;
-	const char *oh_name_opt;
-	const char *firmware;
-	const char *mbox_name;
-	const struct rproc_ops *ops;
-	int (*device_enable) (struct platform_device *pdev);
-	int (*device_shutdown) (struct platform_device *pdev);
-};
-
-#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
-
-void __init omap_rproc_reserve_cma(void);
-
-#else
-
-void __init omap_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-#endif /* _PLAT_REMOTEPROC_H */
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
deleted file mode 100644
index 5be4d5def427..000000000000
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Copyright (C) 2011, Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
-#define __ARCH_ARM_OMAP_VOLTAGE_H
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-struct voltagedomain;
-
-struct voltagedomain *voltdm_lookup(const char *name);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
-		unsigned long volt);
-#endif