ARM: SPEAr600: Add device-tree support to SPEAr600 boards

This patch adds a generic target for SPEAr600 board that can be
configured via the device-tree. Currently the following devices
are supported via the devicetree:

- VIC interrupts
- PL011 UART
- PL061 GPIO
- Synopsys DW I2C
- Synopsys DW ethernet

Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will
follow in later patches.

Only the spear600-evb is currently supported. Other SPEAr600
based boards will follow later.

Since the current mainline SPEAr600 code only supports the SPEAr600
evaluation board, with nearly zero peripheral devices (only UART
and GPIO), it makes sense to switch over to DT based configuration
completely now. So this patch also removes all non-DT stuff, mainly
platform device data. The files spear600.c and spear600_evb.c are
removed completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 47 insertions, 191 deletions

diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
index ff4ae5ba00f1..fbe298bd1d92 100644
--- a/arch/arm/mach-spear6xx/Kconfig
+++ b/arch/arm/mach-spear6xx/Kconfig
@@ -5,11 +5,12 @@
 if ARCH_SPEAR6XX
 
 menu "SPEAr6xx Implementations"
-config BOARD_SPEAR600_EVB
-	bool "SPEAr600 Evaluation Board"
+config BOARD_SPEAR600_DT
+	bool "SPEAr600 generic board configured via device-tree"
 	select MACH_SPEAR600
+	select USE_OF
 	help
-	  Supports ST SPEAr600 Evaluation Board
+	  Supports ST SPEAr600 boards configured via the device-tree
 
 endmenu
 
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index cc1a4d82d459..76e5750552fc 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -4,9 +4,3 @@
 
 # common files
 obj-y	+= clock.o spear6xx.o
-
-# spear600 specific files
-obj-$(CONFIG_MACH_SPEAR600) += spear600.o
-
-# spear600 boards files
-obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index ac70e0d88fef..358f2800f17b 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -641,8 +641,8 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
 	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
 	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "uart0",		.clk = &uart0_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
+	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
+	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
 	{ .dev_id = "firda",		.clk = &firda_clk},
 	{ .dev_id = "clcd",		.clk = &clcd_clk},
 	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
@@ -655,20 +655,20 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
 	/* clock derived from ahb clk */
 	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
+	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
 	{ .dev_id = "dma",		.clk = &dma_clk},
 	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
 	{ .dev_id = "gmac",		.clk = &gmac_clk},
 	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
+	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
 	/* clock derived from apb clk */
 	{ .dev_id = "adc",		.clk = &adc_clk},
 	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
 	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
 	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "gpio0",		.clk = &gpio0_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "gpio2",		.clk = &gpio2_clk},
+	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
+	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
+	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
 };
 
 void __init spear6xx_clk_init(void)
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
deleted file mode 100644
index d0e6eeae9b04..000000000000
--- a/arch/arm/mach-spear6xx/spear600.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear600.c
- *
- * SPEAr600 machine source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/ptrace.h>
-#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear600 specific devices here */
-
-void __init spear600_init(void)
-{
-	/* call spear6xx family common init function */
-	spear6xx_init();
-}
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
deleted file mode 100644
index c6e4254741cc..000000000000
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear600_evb.c
- *
- * SPEAr600 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-static struct amba_device *amba_devs[] __initdata = {
-	&gpio_device[0],
-	&gpio_device[1],
-	&gpio_device[2],
-	&uart_device[0],
-	&uart_device[1],
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-};
-
-static void __init spear600_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear600 machine init function */
-	spear600_init();
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear6xx_map_io,
-	.init_irq	=	spear6xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear6xx_timer,
-	.init_machine	=	spear600_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628c8b2c..2ed8b14c82c8 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -6,111 +6,21 @@
  * Copyright (C) 2009 ST Microelectronics
  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
  *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
 #include <asm/hardware/vic.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/hardware.h>
-#include <mach/irqs.h>
-
-/* Add spear6xx machines common devices here */
-/* uart device registration */
-struct amba_device uart_device[] = {
-	{
-		.dev = {
-			.init_name = "uart0",
-		},
-		.res = {
-			.start = SPEAR6XX_ICM1_UART0_BASE,
-			.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irq = {IRQ_UART_0, NO_IRQ},
-	}, {
-		.dev = {
-			.init_name = "uart1",
-		},
-		.res = {
-			.start = SPEAR6XX_ICM1_UART1_BASE,
-			.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irq = {IRQ_UART_1, NO_IRQ},
-	}
-};
-
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data[] = {
-	{
-		.gpio_base	= 0,
-		.irq_base	= SPEAR_GPIO0_INT_BASE,
-	}, {
-		.gpio_base	= 8,
-		.irq_base	= SPEAR_GPIO1_INT_BASE,
-	}, {
-		.gpio_base	= 16,
-		.irq_base	= SPEAR_GPIO2_INT_BASE,
-	},
-};
-
-struct amba_device gpio_device[] = {
-	{
-		.dev = {
-			.init_name = "gpio0",
-			.platform_data = &gpio_plat_data[0],
-		},
-		.res = {
-			.start = SPEAR6XX_CPU_GPIO_BASE,
-			.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
-	}, {
-		.dev = {
-			.init_name = "gpio1",
-			.platform_data = &gpio_plat_data[1],
-		},
-		.res = {
-			.start = SPEAR6XX_ICM3_GPIO_BASE,
-			.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irq = {IRQ_BASIC_GPIO, NO_IRQ},
-	}, {
-		.dev = {
-			.init_name = "gpio2",
-			.platform_data = &gpio_plat_data[2],
-		},
-		.res = {
-			.start = SPEAR6XX_ICM2_GPIO_BASE,
-			.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irq = {IRQ_APPL_GPIO, NO_IRQ},
-	}
-};
-
-/* This will add devices, and do machine specific tasks */
-void __init spear6xx_init(void)
-{
-	/* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear6xx_init_irq(void)
-{
-	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
-	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
-}
 
 /* Following will create static virtual/physical mappings */
 static struct map_desc spear6xx_io_desc[] __initdata = {
@@ -181,3 +91,33 @@ static void __init spear6xx_timer_init(void)
 struct sys_timer spear6xx_timer = {
 	.init = spear6xx_timer_init,
 };
+
+static void __init spear600_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *spear600_dt_board_compat[] = {
+	"st,spear600",
+	NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
+	{ /* Sentinel */ }
+};
+
+static void __init spear6xx_dt_init_irq(void)
+{
+	of_irq_init(vic_of_match);
+}
+
+DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
+	.map_io		=	spear6xx_map_io,
+	.init_irq	=	spear6xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear6xx_timer,
+	.init_machine	=	spear600_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear600_dt_board_compat,
+MACHINE_END