Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

15 files changed, 104 insertions, 146 deletions

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index c35456f02acb..56e8cebeb7d5 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -732,9 +732,7 @@ static inline void balloon3_nand_init(void) {}
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data balloon3_max1587a_v3_info = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 313274016277..3e4e9fe2d462 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -713,9 +713,7 @@ struct da9030_battery_info cm_x300_battery_info = {
 };
 
 static struct regulator_consumer_supply buck2_consumers[] = {
-	{
-		.supply = "vcc_core",
-	},
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data buck2_data = {
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 16ec557b8e43..a3a4a38d4972 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1085,10 +1085,7 @@ static void __init em_x270_userspace_consumers_init(void)
 /* DA9030 related initializations */
 #define REGULATOR_CONSUMER(_name, _dev_name, _supply)		        \
 	static struct regulator_consumer_supply _name##_consumers[] = {	\
-		{							\
-			.dev_name = _dev_name,				\
-			.supply = _supply,				\
-		},							\
+		REGULATOR_SUPPLY(_supply, _dev_name),			\
 	}
 
 REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b83b95a29503..d09da6a746b8 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/input/navpoint.h>
 #include <linux/lcd.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/asic3.h>
@@ -102,6 +103,10 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS_LPM_LOW,
 
+	/* STUART (IRDA) */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
 	/* PWM 1 (Backlight) */
 	GPIO17_PWM1_OUT,
 
@@ -113,7 +118,7 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO113_I2S_SYSCLK,
 
 	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK,
+	GPIO23_SSP1_SCLK_IN,
 	GPIO24_SSP1_SFRM,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
@@ -125,10 +130,13 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO88_GPIO,
 
 	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
 	GPIO13_GPIO,	/* W3220_IRQ */
 	GPIO14_GPIO,	/* nWLAN_IRQ */
 
+	/* HX4700 specific output GPIOs */
+	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
+
 	GPIO10_GPIO,	/* GSM_IRQ */
 	GPIO13_GPIO,	/* CPLD_IRQ */
 	GPIO107_GPIO,	/* DS1WM_IRQ */
@@ -183,6 +191,23 @@ static struct platform_device gpio_keys = {
 };
 
 /*
+ * Synaptics NavPoint connected to SSP1
+ */
+
+static struct navpoint_platform_data navpoint_platform_data = {
+	.port	= 1,
+	.gpio	= GPIO102_HX4700_SYNAPTICS_POWER_ON,
+};
+
+static struct platform_device navpoint = {
+	.name	= "navpoint",
+	.id	= -1,
+	.dev = {
+		.platform_data = &navpoint_platform_data,
+	},
+};
+
+/*
  * ASIC3
  */
 
@@ -227,7 +252,6 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC0_LED0,		/* red */
 	ASIC3_GPIOC1_LED1,		/* green */
 	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC4_CF_nCD,
 	ASIC3_GPIOC5_nCIOW,
 	ASIC3_GPIOC6_nCIOR,
 	ASIC3_GPIOC7_nPCE_1,
@@ -241,6 +265,7 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC15_nPIOR,
 
 	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD4_CF_nCD,
 	ASIC3_GPIOD11_nCIOIS16,
 	ASIC3_GPIOD12_nCWAIT,
 	ASIC3_GPIOD15_nPIOW,
@@ -291,6 +316,7 @@ static struct asic3_platform_data asic3_platform_data = {
 	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
 	.irq_base        = IRQ_BOARD_START,
 	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+	.clock_rate      = 4000000,
 	.leds            = asic3_leds,
 };
 
@@ -680,12 +706,8 @@ static struct platform_device power_supply = {
  */
 
 static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
+	REGULATOR_SUPPLY("vbus_draw", NULL),
+	REGULATOR_SUPPLY("ac_draw", NULL),
 };
 
 static struct regulator_init_data bq24022_init_data = {
@@ -764,9 +786,8 @@ static struct platform_device strataflash = {
  * Maxim MAX1587A on PI2C
  */
 
-static struct regulator_consumer_supply max1587a_consumer = {
-	.supply = "vcc_core",
-};
+static struct regulator_consumer_supply max1587a_consumer =
+	REGULATOR_SUPPLY("vcc_core", NULL);
 
 static struct regulator_init_data max1587a_v3_info = {
 	.constraints = {
@@ -828,6 +849,7 @@ static struct platform_device audio = {
 static struct platform_device *devices[] __initdata = {
 	&asic3,
 	&gpio_keys,
+	&navpoint,
 	&backlight,
 	&w3220,
 	&hx4700_lcd,
@@ -859,6 +881,7 @@ static void __init hx4700_init(void)
 	int ret;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
 	if (ret)
 		pr_err ("hx4700: Failed to request GPIOs.\n");
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index a65867209aa0..a611ad3153c7 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -208,6 +208,7 @@
 #define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
 
 /* SSP 1 */
+#define GPIO23_SSP1_SCLK_IN	MFP_CFG_IN(GPIO23, AF2)
 #define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
 #define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
 #define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
index 02868447b0b1..e57f5c724e8a 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -61,6 +61,9 @@
 #define GPIO93_KEY_VOLUME_UP			93
 #define GPIO94_KEY_VOLUME_DOWN			94
 
+/* Camera */
+#define GPIO56_MT9M111_nOE			56
+
 extern struct input_dev *mioa701_evdev;
 extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
 
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index d72791695b26..0260aaa2fc17 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -31,7 +31,6 @@
 #define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
 #define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
@@ -69,13 +68,13 @@
 #define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
 #define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
 
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
 #define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
 #define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
 #define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
 #define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
 
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
 #define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
 #define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
 #define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
@@ -102,32 +101,6 @@
 #define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
 #define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
 
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
 /*
  * IDE
  */
@@ -166,24 +139,6 @@
 #define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
 #define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
 
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
 /*
  * Compact Flash
  */
@@ -196,10 +151,6 @@
 #define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
 
 /* visible CPLD (U6) registers */
 #define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
@@ -239,21 +190,6 @@
 #define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
 #define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
 
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
 /*
  * Wolfson AC97 Touch
  */
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 8de0651d7efb..2db697cd2b4e 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -579,12 +579,8 @@ static struct platform_device power_supply = {
  */
 
 static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
+	REGULATOR_SUPPLY("vbus_draw", NULL),
+	REGULATOR_SUPPLY("ac_draw", NULL),
 };
 
 static struct regulator_init_data bq24022_init_data = {
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 061d57009cee..bf99022b021f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -103,6 +103,7 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO82_CIF_DD_5,
 	GPIO84_CIF_FV,
 	GPIO85_CIF_LV,
+	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
 
 	/* Bluetooth */
 	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
@@ -581,9 +582,7 @@ static struct wm97xx_pdata mioa701_wm97xx_pdata = {
  * Voltage regulation
  */
 static struct regulator_consumer_supply max1586_consumers[] = {
-	{
-		.supply = "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data max1586_v3_info = {
@@ -705,6 +704,7 @@ static struct gpio global_gpios[] = {
 	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
 	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
 	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
+	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
 static void __init mioa701_machine_init(void)
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index fbc10d7b95d1..dad71cfa34c8 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -429,9 +429,7 @@ void __init palm27x_power_init(int ac, int usb)
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data palm27x_max1587a_v3_info = {
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index abab4e2b122c..cb723e84bc27 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -65,6 +65,18 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 };
 
+static void __iomem *pcm990_cpld_base;
+
+static u8 pcm990_cpld_readb(unsigned int reg)
+{
+	return readb(pcm990_cpld_base + reg);
+}
+
+static void pcm990_cpld_writeb(u8 value, unsigned int reg)
+{
+	writeb(value, pcm990_cpld_base + reg);
+}
+
 /*
  * pcm990_lcd_power - control power supply to the LCD
  * @on: 0 = switch off, 1 = switch on
@@ -78,13 +90,13 @@ static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
 		/* enable LCD-Latches
 		 * power on LCD
 		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
-			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
+				PCM990_CTRL_REG3);
 	} else {
 		/* disable LCD-Latches
 		 * power off LCD
 		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
 	}
 }
 #endif
@@ -243,15 +255,26 @@ static unsigned long pcm990_irq_enabled;
 static void pcm990_mask_ack_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
+
+	pcm990_irq_enabled &= ~(1 << pcm990_irq);
+
+	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
 }
 
 static void pcm990_unmask_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
+	u8 val;
+
 	/* the irq can be acknowledged only if deasserted, so it's done here */
-	PCM990_INTSETCLR |= 1 << pcm990_irq;
-	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
+
+	pcm990_irq_enabled |= (1 << pcm990_irq);
+
+	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+	val |= 1 << pcm990_irq;
+	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
+
+	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
 }
 
 static struct irq_chip pcm990_irq_chip = {
@@ -261,7 +284,10 @@ static struct irq_chip pcm990_irq_chip = {
 
 static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+	unsigned long pending;
+
+	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+	pending &= pcm990_irq_enabled;
 
 	do {
 		/* clear our parent IRQ */
@@ -270,7 +296,8 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
 		}
-		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+		pending &= pcm990_irq_enabled;
 	} while (pending);
 }
 
@@ -285,8 +312,9 @@ static void __init pcm990_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
-	PCM990_INTSETCLR = 0xFF;
+	/* disable all Interrupts */
+	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
+	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
 
 	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
 	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
@@ -309,13 +337,16 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data *p_d = dev->platform_data;
+	u8 val;
+
+	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
 
 	if ((1 << vdd) & p_d->ocr_mask)
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						PCM990_CTRL_MMC2PWR;
+		val |= PCM990_CTRL_MMC2PWR;
 	else
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						~PCM990_CTRL_MMC2PWR;
+		val &= ~PCM990_CTRL_MMC2PWR;
+
+	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
 }
 
 static void pcm990_mci_exit(struct device *dev, void *data)
@@ -481,23 +512,6 @@ static struct platform_device pcm990_camera[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * enable generic access to the base board control CPLDs U6 and U7
- */
-static struct map_desc pcm990_io_desc[] __initdata = {
-	{
-		.virtual	= PCM990_CTRL_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
-		.length		= PCM990_CTRL_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}, {
-		.virtual	= PCM990_CF_PLD_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
-		.length		= PCM990_CF_PLD_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}
-};
-
-/*
  * system init for baseboard usage. Will be called by pcm027 init.
  *
  * Add platform devices present on this baseboard and init
@@ -507,8 +521,11 @@ void __init pcm990_baseboard_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
 
-	/* register CPLD access */
-	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
+	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
+	if (!pcm990_cpld_base) {
+		pr_err("pcm990: failed to ioremap cpld\n");
+		return;
+	}
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index df2ab0fb2ace..363d91b44ecb 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -877,9 +877,7 @@ static struct i2c_board_info spitz_i2c_devs[] = {
 };
 
 static struct regulator_consumer_supply isl6271a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data isl6271a_info[] = {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4cd645e29b64..30b1b0b3c7f7 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -151,10 +151,7 @@ static struct platform_device sht15 = {
 };
 
 static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	{
-		.dev_name = "sht15",
-		.supply = "vcc",
-	},
+	REGULATOR_SUPPLY("vcc", "sht15"),
 };
 
 enum stargate2_ldos{
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index c57ab636ea9c..e1740acd15f1 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -640,9 +640,7 @@ static inline void vpac270_ide_init(void) {}
 #if defined(CONFIG_REGULATOR_MAX1586) || \
     defined(CONFIG_REGULATOR_MAX1586_MODULE)
 static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data vpac270_max1587a_v3_info = {
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fa8619970841..b9320cb8a11f 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -615,9 +615,7 @@ static inline void z2_spi_init(void) {}
 #if defined(CONFIG_REGULATOR_TPS65023) || \
 	defined(CONFIG_REGULATOR_TPS65023_MODULE)
 static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
+	REGULATOR_SUPPLY("vcc_core", NULL),
 };
 
 static struct regulator_init_data z2_tps65021_info[] = {