Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b
  [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed
  [ARM] am79c961a: platform_get_irq() may return signed unnoticed
  [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page()
  [ARM] Feroceon: fix function alignment in proc-feroceon.S
  [ARM] Orion: catch a couple more alternative spellings of PCIe
  [ARM] Orion: fix orion-ehci platform resource end addresses
  [ARM] Orion: fix ->map_irq() PCIe bus number check
  [ARM] Orion: fix ioremap() optimization
  [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check
  [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check
  kprobes/arm: fix decoding of arithmetic immediate instructions
  kprobes/arm: fix cache flush address for instruction stub
  [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2
  [ARM] 5021/1: at91: buildfix for sam9263 + PM
  [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation
  [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263
  [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake()
  [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info
  [ARM] 5014/1: Cleanup reset state before entering suspend or resetting.
  ...

9 files changed, 64 insertions, 37 deletions

diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 6b179371e0a2..9608503d67f5 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -19,14 +19,14 @@
 
 /*
  * The Orion has fully programable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
+ * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
  * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
  * address decode windows that allow it to access any of the Orion resources.
  *
  * CPU address decoding --
  * Linux assumes that it is the boot loader that already setup the access to
  * DDR and internal registers.
- * Setup access to PCI and PCI-E IO/MEM space is issued by this file.
+ * Setup access to PCI and PCIe IO/MEM space is issued by this file.
  * Setup access to various devices located on the device bus interface (e.g.
  * flashes, RTC, etc) should be issued by machine-setup.c according to
  * specific board population (by using orion5x_setup_*_win()).
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 439c7784af02..968deb58be01 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -132,7 +132,7 @@ static struct platform_device orion5x_uart = {
 static struct resource orion5x_ehci0_resources[] = {
 	{
 		.start	= ORION5X_USB0_PHYS_BASE,
-		.end	= ORION5X_USB0_PHYS_BASE + SZ_4K,
+		.end	= ORION5X_USB0_PHYS_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -145,7 +145,7 @@ static struct resource orion5x_ehci0_resources[] = {
 static struct resource orion5x_ehci1_resources[] = {
 	{
 		.start	= ORION5X_USB1_PHYS_BASE,
-		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K,
+		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -317,7 +317,7 @@ struct sys_timer orion5x_timer = {
  ****************************************************************************/
 
 /*
- * Identify device ID and rev from PCIE configuration header space '0'.
+ * Identify device ID and rev from PCIe configuration header space '0'.
  */
 static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 {
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f4c4c9a72a7c..14adf8d1a54a 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -33,10 +33,9 @@ struct pci_sys_data;
 struct pci_bus;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
-int orion5x_pcie_local_bus_nr(void);
-int orion5x_pci_local_bus_nr(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
 /*
  * Valid GPIO pins according to MPP setup, used by machine-setup.
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index ea3141e3e3c0..44c64342dacb 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -241,14 +241,17 @@ void __init db88f5281_pci_preinit(void)
 
 static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
 	/*
-	 * PCIE IRQ is connected internally (not GPIO)
+	 * Check for devices with hard-wired IRQs.
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
 
 	/*
-	 * PCI IRQs are connected via GPIOs
+	 * PCI IRQs are connected via GPIOs.
 	 */
 	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
 	case 0:
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 058a525c2ab6..f9430f5ca9a8 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -43,11 +43,16 @@
 
 static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	/* PCI-E */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	int irq;
 
-	pr_err("%s: requested mapping for unknown bus\n", __func__);
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	pr_err("%s: requested mapping for unknown device\n", __func__);
 
 	return -1;
 }
@@ -250,9 +255,9 @@ static void __init dns323_init(void)
 	 */
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 
-	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
+	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
 	 *
-	 * Open a special address decode windows for the PCIE WA.
+	 * Open a special address decode windows for the PCIe WA.
 	 */
 	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
 				ORION5X_PCIE_WA_SIZE);
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 707db4be74a6..88410862feef 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -120,13 +120,19 @@ static struct platform_device kurobox_pro_nor_flash = {
 
 static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
 	/*
 	 * PCI isn't used on the Kuro
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
-	else
-		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+	printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
 
 	return -1;
 }
@@ -191,7 +197,7 @@ static void __init kurobox_pro_init(void)
 	orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
 
 	/*
-	 * Open a special address decode windows for the PCIE WA.
+	 * Open a special address decode windows for the PCIe WA.
 	 */
 	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
 				ORION5X_PCIE_WA_SIZE);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index fdf99fca85b3..9d5d39fa19c3 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -41,11 +41,6 @@ void __init orion5x_pcie_id(u32 *dev, u32 *rev)
 	*rev = orion_pcie_rev(PCIE_BASE);
 }
 
-int __init orion5x_pcie_local_bus_nr(void)
-{
-	return orion_pcie_get_local_bus_nr(PCIE_BASE);
-}
-
 static int pcie_valid_config(int bus, int dev)
 {
 	/*
@@ -269,7 +264,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
  */
 static DEFINE_SPINLOCK(orion5x_pci_lock);
 
-int orion5x_pci_local_bus_nr(void)
+static int orion5x_pci_local_bus_nr(void)
 {
 	u32 conf = orion5x_read(PCI_P2P_CONF);
 	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
@@ -557,3 +552,16 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
 
 	return bus;
 }
+
+int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int bus = dev->bus->number;
+
+	/*
+	 * PCIe endpoint?
+	 */
+	if (bus < orion5x_pci_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
+
+	return -1;
+}
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 7082fe8f83b1..81abc1003aae 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -172,11 +172,14 @@ void __init rd88f5182_pci_preinit(void)
 
 static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
 	/*
-	 * PCI-E isn't used on the RD2
+	 * Check for devices with hard-wired IRQs.
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -257,7 +260,7 @@ static void __init rd88f5182_init(void)
 	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
 
 	/*
-	 * Open a special address decode windows for the PCIE WA.
+	 * Open a special address decode windows for the PCIe WA.
 	 */
 	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
 				ORION5X_PCIE_WA_SIZE);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 6f93668b0ed5..9afb41ee6e07 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -141,14 +141,17 @@ void __init qnap_ts209_pci_preinit(void)
 
 static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
 	/*
-	 * PCIE IRQ is connected internally (not GPIO)
+	 * Check for devices with hard-wired IRQs.
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
 
 	/*
-	 * PCI IRQs are connected via GPIOs
+	 * PCI IRQs are connected via GPIOs.
 	 */
 	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
 	case 0:
@@ -372,7 +375,7 @@ static void __init qnap_ts209_init(void)
 			    QNAP_TS209_NOR_BOOT_SIZE);
 
 	/*
-	 * Open a special address decode windows for the PCIE WA.
+	 * Open a special address decode windows for the PCIe WA.
 	 */
 	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
 				ORION5X_PCIE_WA_SIZE);