ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency

The SI unit of frequency is Hertz, named after Heinrich Hertz, and is
given the symbol "Hz" to denote this.  "hz" is not the unit of frequency,
and is in fact meaningless.

Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz'
contribution to the modern world.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

6 files changed, 8 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index f899e77ff5e6..17a6f752a436 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -216,11 +216,11 @@ static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
 
 	div = gpmc_calc_divider(min_gpmc_clk_period);
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
-	if (gpmc_clk_ns < 15) /* >66Mhz */
+	if (gpmc_clk_ns < 15) /* >66MHz */
 		onenand_flags |= ONENAND_FLAG_HF;
 	else
 		onenand_flags &= ~ONENAND_FLAG_HF;
-	if (gpmc_clk_ns < 12) /* >83Mhz */
+	if (gpmc_clk_ns < 12) /* >83MHz */
 		onenand_flags |= ONENAND_FLAG_VHF;
 	else
 		onenand_flags &= ~ONENAND_FLAG_VHF;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 9a8611ab5dfa..cff079e563f4 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -70,7 +70,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev,
 
 		reg = omap_ctrl_readl(control_pbias_offset);
 		if (cpu_is_omap3630()) {
-			/* Set MMC I/O to 52Mhz */
+			/* Set MMC I/O to 52MHz */
 			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
 			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
 			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 0e75ec3e114b..b2233b72b24d 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -116,7 +116,7 @@ const struct prcm_config omap2430_rate_table[] = {
 		RATE_IN_243X},
 
 	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13MHz */
 		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
 		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
 		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
@@ -124,7 +124,7 @@ const struct prcm_config omap2430_rate_table[] = {
 		RATE_IN_243X},
 
 	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12MHz */
 		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
 		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
 		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index ae3f1553158d..339b0ecb7c32 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -164,6 +164,6 @@ void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
 	mem_timings.slow_dll_ctrl |=
 		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
 
-	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
+	/* 90 degree phase for anything below 133MHz + disable DLL filter */
 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 2c88ff2d0236..53a2537cd75a 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -64,7 +64,7 @@ ENTRY(omap242x_sram_ddr_init)
 	mvn	r9, #0x4		@ mask to get clear bit2
 	and	r10, r10, r9		@ clear bit2 for lock mode.
 	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133MHz
 	str	r10, [r11]		@ commit to DLLA_CTRL
 	bl	i_dll_wait		@ wait for dll to lock
 
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index d5deb9761fc7..b3edd6f7f7db 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -64,7 +64,7 @@ ENTRY(omap243x_sram_ddr_init)
 	mvn	r9, #0x4		@ mask to get clear bit2
 	and	r10, r10, r9		@ clear bit2 for lock mode.
 	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
+	orr	r10, r10, #0x2		@ 90 degree phase for all below 133MHz
 	str	r10, [r11]		@ commit to DLLA_CTRL
 	bl	i_dll_wait		@ wait for dll to lock