diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:27:22 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:27:22 -0800 |
commit | bab588fcfb6335c767d811a8955979f5440328e0 (patch) | |
tree | 2a862ddf47a82be885a8e7945a17cc3ff7a658b9 /arch/arm/mach-omap2/usb-host.c | |
parent | 3298a3511f1e73255a8dc023efd909e569eea037 (diff) | |
parent | 9cb0d1babfcb1b4ac248c09425f7d5de1e771133 (diff) |
Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC-specific updates from Arnd Bergmann:
"This is a larger set of new functionality for the existing SoC
families, including:
- vt8500 gains support for new CPU cores, notably the Cortex-A9 based
wm8850
- prima2 gains support for the "marco" SoC family, its SMP based
cousin
- tegra gains support for the new Tegra4 (Tegra114) family
- socfpga now supports a newer version of the hardware including SMP
- i.mx31 and bcm2835 are now using DT probing for their clocks
- lots of updates for sh-mobile
- OMAP updates for clocks, power management and USB
- i.mx6q and tegra now support cpuidle
- kirkwood now supports PCIe hot plugging
- tegra clock support is updated
- tegra USB PHY probing gets implemented diffently"
* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
ARM: prima2: remove duplicate v7_invalidate_l1
ARM: shmobile: r8a7779: Correct TMU clock support again
ARM: prima2: fix __init section for cpu hotplug
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
arm: socfpga: Add SMP support for actual socfpga harware
arm: Add v7_invalidate_l1 to cache-v7.S
arm: socfpga: Add entries to enable make dtbs socfpga
arm: socfpga: Add new device tree source for actual socfpga HW
ARM: tegra: sort Kconfig selects for Tegra114
ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
ARM: tegra: Fix build error for gic update
ARM: tegra: remove empty tegra_smp_init_cpus()
ARM: shmobile: Register ARM architected timer
ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
ARM: shmobile: r8a7779: Correct TMU clock support
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
...
Diffstat (limited to 'arch/arm/mach-omap2/usb-host.c')
-rw-r--r-- | arch/arm/mach-omap2/usb-host.c | 41 |
1 files changed, 5 insertions, 36 deletions
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 2e44e8a22884..5706bdccf45e 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -37,19 +37,6 @@ #define USBHS_UHH_HWMODNAME "usb_host_hs" #define USBHS_TLL_HWMODNAME "usb_tll_hs" -static struct usbhs_omap_platform_data usbhs_data; -static struct usbtll_omap_platform_data usbtll_data; -static struct ehci_hcd_omap_platform_data ehci_data; -static struct ohci_hcd_omap_platform_data ohci_data; - -static struct omap_device_pm_latency omap_uhhtll_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -485,32 +472,18 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { struct omap_hwmod *uhh_hwm, *tll_hwm; struct platform_device *pdev; int bus_id = -1; - int i; - - for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { - usbhs_data.port_mode[i] = pdata->port_mode[i]; - usbtll_data.port_mode[i] = pdata->port_mode[i]; - ohci_data.port_mode[i] = pdata->port_mode[i]; - ehci_data.port_mode[i] = pdata->port_mode[i]; - ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; - ehci_data.regulator[i] = pdata->regulator[i]; - } - ehci_data.phy_reset = pdata->phy_reset; - ohci_data.es2_compatibility = pdata->es2_compatibility; - usbhs_data.ehci_data = &ehci_data; - usbhs_data.ohci_data = &ohci_data; if (cpu_is_omap34xx()) { setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); if (omap_rev() <= OMAP3430_REV_ES2_1) - usbhs_data.single_ulpi_bypass = true; + pdata->single_ulpi_bypass = true; } else if (cpu_is_omap44xx()) { setup_4430ehci_io_mux(pdata->port_mode); @@ -530,9 +503,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm, - &usbtll_data, sizeof(usbtll_data), - omap_uhhtll_latency, - ARRAY_SIZE(omap_uhhtll_latency), false); + pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build hwmod device %s\n", USBHS_TLL_HWMODNAME); @@ -540,9 +511,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm, - &usbhs_data, sizeof(usbhs_data), - omap_uhhtll_latency, - ARRAY_SIZE(omap_uhhtll_latency), false); + pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s\n", USBHS_UHH_HWMODNAME); @@ -552,7 +521,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) #else -void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { } |