Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

1 files changed, 526 insertions, 56 deletions

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 31bb7010bd48..0a14dca31e30 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -30,15 +30,251 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
+#include <asm/clkdev.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "clock.h"
-#include "clock34xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
+static const struct clkops clkops_noncore_dpll_ops;
+
+#include "clock34xx.h"
+
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_343X		(1 << 0)
+#define CK_3430ES1	(1 << 1)
+#define CK_3430ES2	(1 << 2)
+
+static struct omap_clk omap34xx_clks[] = {
+	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
+	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
+	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
+	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
+	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
+	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
+	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
+	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
+	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
+	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
+	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
+	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
+	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
+	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
+	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
+	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
+	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
+	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
+	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
+	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
+	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
+	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
+	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
+	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
+	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
+	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
+	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
+	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
+	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
+	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
+	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
+	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
+	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
+	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick,	CK_343X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
+	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
+	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
+	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
+	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
+	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
+	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
+	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
+	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
+	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
+	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
+	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
+	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
+	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
+	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
+	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
+	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
+	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
+	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
+	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
+	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
+	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
+	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
+	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
+	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
+	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
+	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
+	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
+};
+
 /* CM_AUTOIDLE_PLL*.AUTO_* bit values */
 #define DPLL_AUTOIDLE_DISABLE			0x0
 #define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
@@ -51,11 +287,9 @@
  *
  * Recalculate and propagate the DPLL rate.
  */
-static void omap3_dpll_recalc(struct clk *clk)
+static unsigned long omap3_dpll_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_dpll_rate(clk);
-
-	propagate_rate(clk);
+	return omap2_get_dpll_rate(clk);
 }
 
 /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
@@ -78,14 +312,12 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	const struct dpll_data *dd;
 	int i = 0;
 	int ret = -EINVAL;
-	u32 idlest_mask;
 
 	dd = clk->dpll_data;
 
-	state <<= dd->idlest_bit;
-	idlest_mask = 1 << dd->idlest_bit;
+	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
+	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
@@ -104,6 +336,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	return ret;
 }
 
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk->dpll_data->clk_ref->rate / (n + 1);
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
 /* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
 
 /*
@@ -128,25 +396,20 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 
 	ai = omap3_dpll_autoidle_read(clk);
 
+	omap3_dpll_deny_idle(clk);
+
 	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
 
-	if (ai) {
-		/*
-		 * If no downstream clocks are enabled, CM_IDLEST bit
-		 * may never become active, so don't wait for DPLL to lock.
-		 */
-		r = 0;
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
 		omap3_dpll_allow_idle(clk);
-	} else {
-		r = _omap3_wait_dpll_status(clk, 1);
-		omap3_dpll_deny_idle(clk);
-	};
 
 	return r;
 }
 
 /*
- * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
  * @clk: pointer to a DPLL struct clk
  *
  * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
@@ -236,14 +499,25 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 static int omap3_noncore_dpll_enable(struct clk *clk)
 {
 	int r;
+	struct dpll_data *dd;
 
 	if (clk == &dpll3_ck)
 		return -EINVAL;
 
-	if (clk->parent->rate == clk_get_rate(clk))
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
-	else
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -270,6 +544,215 @@ static void omap3_noncore_dpll_disable(struct clk *clk)
 	_omap3_noncore_dpll_stop(clk);
 }
 
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/* Set jitter correction */
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->freqsel_mask;
+	v |= freqsel << __ffs(dd->freqsel_mask);
+	__raw_writel(v, dd->control_reg);
+
+	/* Set DPLL multiplier, divider */
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= m << __ffs(dd->mult_mask);
+	v |= (n - 1) << __ffs(dd->div1_mask);
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *new_parent = NULL;
+	u16 freqsel;
+	struct dpll_data *dd;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (rate == omap2_get_dpll_rate(clk))
+		return 0;
+
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		if (!freqsel)
+			WARN_ON(1);
+
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
+
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
+
+	return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (omap_rev() == OMAP3430_REV_ES1_0) {
+		printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+	return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+
+/*
+ * CORE DPLL (DPLL3) rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate.  Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	unsigned long validrate, sdrcrate;
+	struct omap_sdrc_params *sp;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	if (clk != &dpll3_m2_ck)
+		return -EINVAL;
+
+	if (rate == clk->rate)
+		return 0;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	sdrcrate = sdrc_ick.rate;
+	if (rate > clk->rate)
+		sdrcrate <<= ((rate / clk->rate) - 1);
+	else
+		sdrcrate >>= ((clk->rate / rate) - 1);
+
+	sp = omap2_sdrc_get_params(sdrcrate);
+	if (!sp)
+		return -EINVAL;
+
+	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		validrate);
+	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
+		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+
+	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
+	WARN_ON(new_div != 1 && new_div != 2);
+
+	/* REVISIT: Add SDRC_MR changing to this code also */
+	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
+				  sp->actim_ctrlb, new_div);
+
+	return 0;
+}
+
+
+static const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+};
+
+/* DPLL autoidle read/set code */
+
+
 /**
  * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
  * @clk: struct clk * of the DPLL to read
@@ -356,9 +839,10 @@ static void omap3_dpll_deny_idle(struct clk *clk)
  * Using parent clock DPLL data, look up DPLL state.  If locked, set our
  * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
  */
-static void omap3_clkoutx2_recalc(struct clk *clk)
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	unsigned long rate;
 	u32 v;
 	struct clk *pclk;
 
@@ -372,17 +856,15 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 
 	dd = pclk->dpll_data;
 
-	WARN_ON(!dd->control_reg || !dd->enable_mask);
+	WARN_ON(!dd->enable_mask);
 
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
-	if (v != DPLL_LOCKED)
-		clk->rate = clk->parent->rate;
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		rate = clk->parent->rate;
 	else
-		clk->rate = clk->parent->rate * 2;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
+		rate = clk->parent->rate * 2;
+	return rate;
 }
 
 /* Common clock code */
@@ -432,7 +914,7 @@ static int __init omap2_clk_arch_init(void)
 
 	/* REVISIT: not yet ready for 343x */
 #if 0
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 #endif
 
@@ -450,26 +932,13 @@ arch_initcall(omap2_clk_arch_init);
 int __init omap2_clk_init(void)
 {
 	/* struct prcm_config *prcm; */
-	struct clk **clkp;
+	struct omap_clk *c;
 	/* u32 clkrate; */
 	u32 cpu_clkflg;
 
-	/* REVISIT: Ultimately this will be used for multiboot */
-#if 0
-	if (cpu_is_omap242x()) {
-		cpu_mask = RATE_IN_242X;
-		cpu_clkflg = CLOCK_IN_OMAP242X;
-		clkp = onchip_24xx_clks;
-	} else if (cpu_is_omap2430()) {
-		cpu_mask = RATE_IN_243X;
-		cpu_clkflg = CLOCK_IN_OMAP243X;
-		clkp = onchip_24xx_clks;
-	}
-#endif
 	if (cpu_is_omap34xx()) {
 		cpu_mask = RATE_IN_343X;
-		cpu_clkflg = CLOCK_IN_OMAP343X;
-		clkp = onchip_34xx_clks;
+		cpu_clkflg = CK_343X;
 
 		/*
 		 * Update this if there are further clock changes between ES2
@@ -477,23 +946,24 @@ int __init omap2_clk_init(void)
 		 */
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+			cpu_clkflg |= CK_3430ES1;
 		} else {
 			cpu_mask |= RATE_IN_3430ES2;
-			cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+			cpu_clkflg |= CK_3430ES2;
 		}
 	}
 
 	clk_init(&omap2_clk_functions);
 
-	for (clkp = onchip_34xx_clks;
-	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
-	     clkp++) {
-		if ((*clkp)->flags & cpu_clkflg) {
-			clk_register(*clkp);
-			omap2_init_clk_clkdm(*clkp);
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		clk_init_one(c->lk.clk);
+
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
 		}
-	}
 
 	/* REVISIT: Not yet ready for OMAP3 */
 #if 0