ARM: davinci: streamline sysmod access

There are instances of IO_ADDRESS() being used for system module
(sysmod) register access. Eliminate this in favor of a ioremap()
based access. ioremap() the entire sysmod address space once during
boot-up and provide a helper macro to access specific register
offsets within the address space.

With this, also eliminate ioremap() of specific sysmodule registers
related to VPIF happening in DM646x EVM code.

While at it, also eliminate some duplicate sysmod register offset macros
defined in code and place offset definitions at one place in davinci.h

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[nsekhar@ti.com: removed the addition of ifndef __ASSEMBLER__
in davinci.h, eliminate IO_ADDRESS() usage left out in dm646x.c,
cleanup VPIF sysmodule register access as part of this patch and
keep all sysmod offsets in davinci.h Also, convert the WARN_ON()
on failure to setup sysmod base to BUG_ON()]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

1 files changed, 21 insertions, 11 deletions

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 50c0156b4262..d2f9666284a7 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,6 +23,7 @@
 #include <mach/mmc.h>
 #include <mach/time.h>
 
+#include "davinci.h"
 #include "clock.h"
 
 #define DAVINCI_I2C_BASE	     0x01C21000
@@ -33,8 +34,19 @@
 #define DM365_MMCSD0_BASE	     0x01D11000
 #define DM365_MMCSD1_BASE	     0x01D00000
 
-/* System control register offsets */
-#define DM64XX_VDD3P3V_PWDN	0x48
+void __iomem  *davinci_sysmod_base;
+
+void davinci_map_sysmod(void)
+{
+	davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE,
+					      0x800);
+	/*
+	 * Throw a bug since a lot of board initialization code depends
+	 * on system module availability. ioremap() failing this early
+	 * need careful looking into anyway.
+	 */
+	BUG_ON(!davinci_sysmod_base);
+}
 
 static struct resource i2c_resources[] = {
 	{
@@ -212,12 +224,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			davinci_cfg_reg(DM355_SD1_DATA2);
 			davinci_cfg_reg(DM355_SD1_DATA3);
 		} else if (cpu_is_davinci_dm365()) {
-			void __iomem *pupdctl1 =
-				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
-
 			/* Configure pull down control */
-			__raw_writel((__raw_readl(pupdctl1) & ~0xfc0),
-					pupdctl1);
+			unsigned v;
+
+			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
+			__raw_writel(v & ~0xfc0,
+					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
 
 			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
 			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
@@ -246,11 +258,9 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
 		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
-			void __iomem *base =
-				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
-
 			/* Power-on 3.3V IO cells */
-			__raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+			__raw_writel(0,
+				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
 			/*Set up the pull regiter for MMC */
 			davinci_cfg_reg(DM644X_MSTK);
 		}