summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2008-01-04 18:30:24 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-02-04 13:16:39 +0000
commite83aff58bf1b7e6b355a0cfa206e9d3aebe5623f (patch)
tree0c5e5d990291cdef1e173a1bed74bb8915c67168 /arch/arm/mach-at91
parentae9458d6a0956aa21cb49e1251e35a8d4dacbe6e (diff)
[ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work
On the at91sam9263, IRQs for GPIO banks C and D don't currently work. This is because banks C, D, and E share one clock and toplevel IRQ, but the AT91 code setting up and handling GPIO IRQs expects no sharing. This patch: - Fixes GPIO IRQ setup and handling to cope with GPIO banks that are shared like on sam9263 chips, by setting up a list of those banks and making the IRQ dispatching logic scan that list. - Precomputes the address of each bank's registers, saving it with other per-bank data so that it no longer needs to be constantly recomputed during IRQs and other GPIO operations. That shrinks hot-path code, while helping the GPIO bank irq updates. - Fixes a minor bug where IRQ_TYPE_NONE was wrongly rejected (it just means "use the default", which is "both edges" here). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/generic.h3
-rw-r--r--arch/arm/mach-at91/gpio.c89
2 files changed, 63 insertions, 29 deletions
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e011..7b9ce7a336b0 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -47,6 +47,9 @@ extern void at91_irq_resume(void);
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
+ unsigned chipbase; /* bank's first GPIO number */
+ void __iomem *regbase; /* base of register bank */
+ struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 6aeddd68d8af..f629c2b5f0c5 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -33,12 +33,10 @@ static int gpio_banks;
static inline void __iomem *pin_to_controller(unsigned pin)
{
- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
-
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
- return sys_base + gpio[pin].offset;
+ return gpio[pin].regbase;
return NULL;
}
@@ -294,11 +292,11 @@ void at91_gpio_suspend(void)
int i;
for (i = 0; i < gpio_banks; i++) {
- u32 pio = gpio[i].offset;
+ void __iomem *pio = gpio[i].regbase;
- backups[i] = at91_sys_read(pio + PIO_IMR);
- at91_sys_write(pio + PIO_IDR, backups[i]);
- at91_sys_write(pio + PIO_IER, wakeups[i]);
+ backups[i] = __raw_readl(pio + PIO_IMR);
+ __raw_writel(backups[i], pio + PIO_IDR);
+ __raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
clk_disable(gpio[i].clock);
@@ -315,13 +313,13 @@ void at91_gpio_resume(void)
int i;
for (i = 0; i < gpio_banks; i++) {
- u32 pio = gpio[i].offset;
+ void __iomem *pio = gpio[i].regbase;
if (!wakeups[i])
clk_enable(gpio[i].clock);
- at91_sys_write(pio + PIO_IDR, wakeups[i]);
- at91_sys_write(pio + PIO_IER, backups[i]);
+ __raw_writel(wakeups[i], pio + PIO_IDR);
+ __raw_writel(backups[i], pio + PIO_IER);
}
}
@@ -361,7 +359,13 @@ static void gpio_irq_unmask(unsigned pin)
static int gpio_irq_type(unsigned pin, unsigned type)
{
- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ case IRQ_TYPE_EDGE_BOTH:
+ return 0;
+ default:
+ return -EINVAL;
+ }
}
static struct irq_chip gpio_irqchip = {
@@ -376,20 +380,30 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
unsigned pin;
struct irq_desc *gpio;
+ struct at91_gpio_bank *bank;
void __iomem *pio;
u32 isr;
- pio = get_irq_chip_data(irq);
+ bank = get_irq_chip_data(irq);
+ pio = bank->regbase;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
for (;;) {
- /* reading ISR acks the pending (edge triggered) GPIO interrupt */
+ /* Reading ISR acks pending (edge triggered) GPIO interrupts.
+ * When there none are pending, we're finished unless we need
+ * to process multiple banks (like ID_PIOCDE on sam9263).
+ */
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
- if (!isr)
- break;
+ if (!isr) {
+ if (!bank->next)
+ break;
+ bank = bank->next;
+ pio = bank->regbase;
+ continue;
+ }
- pin = (unsigned) get_irq_data(irq);
+ pin = bank->chipbase;
gpio = &irq_desc[pin];
while (isr) {
@@ -481,24 +495,21 @@ postcore_initcall(at91_gpio_debugfs_init);
*/
void __init at91_gpio_irq_setup(void)
{
- unsigned pioc, pin;
+ unsigned pioc, pin;
+ struct at91_gpio_bank *this, *prev;
- for (pioc = 0, pin = PIN_BASE;
- pioc < gpio_banks;
- pioc++) {
- void __iomem *controller;
- unsigned id = gpio[pioc].id;
+ for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+ pioc++ < gpio_banks;
+ prev = this, this++) {
+ unsigned id = this->id;
unsigned i;
- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
-
- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
- __raw_writel(~0, controller + PIO_IDR);
+ /* enable PIO controller's clock */
+ clk_enable(this->clock);
- set_irq_data(id, (void *) pin);
- set_irq_chip_data(id, controller);
+ __raw_writel(~0, this->regbase + PIO_IDR);
- for (i = 0; i < 32; i++, pin++) {
+ for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
@@ -508,6 +519,14 @@ void __init at91_gpio_irq_setup(void)
set_irq_flags(pin, IRQF_VALID);
}
+ /* The toplevel handler handles one bank of GPIOs, except
+ * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
+ * the list, so we only set up that handler.
+ */
+ if (prev && prev->next == this)
+ continue;
+
+ set_irq_chip_data(id, this);
set_irq_chained_handler(id, gpio_irq_handler);
}
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
@@ -518,8 +537,20 @@ void __init at91_gpio_irq_setup(void)
*/
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
{
+ unsigned i;
+ struct at91_gpio_bank *last;
+
BUG_ON(nr_banks > MAX_GPIO_BANKS);
gpio = data;
gpio_banks = nr_banks;
+
+ for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
+ data->chipbase = PIN_BASE + i * 32;
+ data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+
+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ if (last && last->id == data->id)
+ last->next = data;
+ }
}