Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  Most of the new code is for the Keystone Navigator driver, which is
  new base support that is going to be needed for their hardware
  accelerated network driver and other units.

  Most of the commits are for moving old code around from at91 and omap
  for things that are done in device drivers nowadays.

   - at91: move reset, poweroff, memory and clocksource code into
     drivers directories
   - socfpga: add edac driver (through arm-soc, as requested by Boris)
   - omap: move omap-intc code to drivers/irqchip
   - sunxi: added an RTC driver for sun6i
   - omap: mailbox driver related changes
   - keystone: support for the "Navigator" component
   - versatile: new reboot, led and soc drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  bus: arm-ccn: Fix spurious warning message
  leds: add device tree bindings for register bit LEDs
  soc: add driver for the ARM RealView
  power: reset: driver for the Versatile syscon reboot
  leds: add a driver for syscon-based LEDs
  drivers/soc: ti: fix build break with modules
  MAINTAINERS: Add Keystone Multicore Navigator drivers entry
  soc: ti: add Keystone Navigator DMA support
  Documentation: dt: soc: add Keystone Navigator DMA bindings
  soc: ti: add Keystone Navigator QMSS driver
  Documentation: dt: soc: add Keystone Navigator QMSS bindings
  rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
  rtc: sun6i: Add sun6i RTC driver
  irqchip: omap-intc: remove unnecessary comments
  irqchip: omap-intc: correct maximum number or MIR registers
  irqchip: omap-intc: enable TURBO idle mode
  irqchip: omap-intc: enable IP protection
  irqchip: omap-intc: remove unnecesary of_address_to_resource() call
  irqchip: omap-intc: comment style cleanup
  irqchip: omap-intc: minor improvement to omap_irq_pending()
  ...

33 files changed, 331 insertions, 789 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 1947a09e5a3f..0e6d548b70d9 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -36,17 +36,6 @@ config OLD_IRQ_AT91
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 
-config AT91_SAM9_ALT_RESET
-	bool
-	default !ARCH_AT91X40
-
-config AT91_SAM9G45_RESET
-	bool
-	default !ARCH_AT91X40
-
-config AT91_SAM9_TIME
-	bool
-
 config HAVE_AT91_SMD
 	bool
 
@@ -55,18 +44,20 @@ config HAVE_AT91_H32MX
 
 config SOC_AT91SAM9
 	bool
-	select AT91_SAM9_TIME
 	select ATMEL_AIC_IRQ if !OLD_IRQ_AT91
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select MEMORY if USE_OF
+	select ATMEL_SDRAMC if USE_OF
 
 config SOC_SAMA5
 	bool
-	select AT91_SAM9_TIME
 	select ATMEL_AIC5_IRQ
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select USE_OF
+	select MEMORY
+	select ATMEL_SDRAMC
 
 menu "Atmel AT91 System-on-Chip"
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 603365e44ed5..ac99d87ffefe 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -9,9 +9,6 @@ obj-		:=
 
 obj-$(CONFIG_OLD_IRQ_AT91)	+= irq.o
 obj-$(CONFIG_OLD_CLK_AT91)	+= clock.o
-obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
-obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
-obj-$(CONFIG_AT91_SAM9_TIME)	+= at91sam926x_time.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h
deleted file mode 100644
index a600e6992920..000000000000
--- a/arch/arm/mach-at91/at91_rstc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_rstc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_rstc_base;
-
-#define at91_rstc_read(field) \
-	__raw_readl(at91_rstc_base + field)
-
-#define at91_rstc_write(field, value) \
-	__raw_writel(value, at91_rstc_base + field)
-#else
-.extern at91_rstc_base
-#endif
-
-#define AT91_RSTC_CR		0x00			/* Reset Controller Control Register */
-#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
-#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
-#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_RSTC_SR		0x04			/* Reset Controller Status Register */
-#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
-#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
-#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
-#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
-#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
-#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
-#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
-#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
-#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR		0x08			/* Reset Controller Mode Register */
-#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
-#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
-#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-
-#endif
diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h
deleted file mode 100644
index 9e29f31ec9a6..000000000000
--- a/arch/arm/mach-at91/at91_shdwc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_shdwc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_shdwc_base;
-
-#define at91_shdwc_read(field) \
-	__raw_readl(at91_shdwc_base + field)
-
-#define at91_shdwc_write(field, value) \
-	__raw_writel(value, at91_shdwc_base + field)
-#endif
-
-#define AT91_SHDW_CR		0x00			/* Shut Down Control Register */
-#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
-#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_SHDW_MR		0x04			/* Shut Down Mode Register */
-#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
-#define			AT91_SHDW_WKMODE0_NONE		0
-#define			AT91_SHDW_WKMODE0_HIGH		1
-#define			AT91_SHDW_WKMODE0_LOW		2
-#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0_MAX	0xf			/* Maximum Counter On Wake Up 0 */
-#define		AT91_SHDW_CPTWK0	(AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
-#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
-#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
-#define		AT91_SHDW_RTCWKEN	(1   << 17)		/* Real Time Clock Wake-up Enable */
-
-#define AT91_SHDW_SR		0x08			/* Shut Down Status Register */
-#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
-#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
-
-#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 3477ba94c4c5..aab1f969a7c3 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
@@ -24,7 +25,6 @@
 #include <mach/hardware.h>
 
 #include "at91_aic.h"
-#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "sam9_smc.h"
@@ -342,8 +342,6 @@ static void __init at91sam9260_map_io(void)
 
 static void __init at91sam9260_ioremap_registers(void)
 {
-	at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
 	at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512);
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
@@ -354,7 +352,6 @@ static void __init at91sam9260_ioremap_registers(void)
 static void __init at91sam9260_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
 
 	at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
 
@@ -362,6 +359,45 @@ static void __init at91sam9260_initialize(void)
 	at91_gpio_init(at91sam9260_gpio, 3);
 }
 
+static struct resource rstc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9260_BASE_RSTC,
+		.end    = AT91SAM9260_BASE_RSTC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = AT91SAM9260_BASE_SDRAMC,
+		.end    = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rstc_device = {
+	.name           = "at91-sam9260-reset",
+	.resource       = rstc_resources,
+	.num_resources  = ARRAY_SIZE(rstc_resources),
+};
+
+static struct resource shdwc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9260_BASE_SHDWC,
+		.end    = AT91SAM9260_BASE_SHDWC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device shdwc_device = {
+	.name           = "at91-poweroff",
+	.resource       = shdwc_resources,
+	.num_resources  = ARRAY_SIZE(shdwc_resources),
+};
+
+static void __init at91sam9260_register_devices(void)
+{
+	platform_device_register(&rstc_device);
+	platform_device_register(&shdwc_device);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -404,6 +440,11 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
+static void __init at91sam9260_init_time(void)
+{
+	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
+}
+
 AT91_SOC_START(at91sam9260)
 	.map_io = at91sam9260_map_io,
 	.default_irq_priority = at91sam9260_default_irq_priority,
@@ -411,5 +452,7 @@ AT91_SOC_START(at91sam9260)
 		    | (1 << AT91SAM9260_ID_IRQ2),
 	.ioremap_registers = at91sam9260_ioremap_registers,
 	.register_clocks = at91sam9260_register_clocks,
+	.register_devices = at91sam9260_register_devices,
 	.init = at91sam9260_initialize,
+	.init_time = at91sam9260_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index fb164a5d04a9..a8bd35963332 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
@@ -23,7 +24,6 @@
 #include <mach/hardware.h>
 
 #include "at91_aic.h"
-#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "sam9_smc.h"
@@ -301,8 +301,6 @@ static void __init at91sam9261_map_io(void)
 
 static void __init at91sam9261_ioremap_registers(void)
 {
-	at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
 	at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512);
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
@@ -313,7 +311,6 @@ static void __init at91sam9261_ioremap_registers(void)
 static void __init at91sam9261_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
 
 	at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
 
@@ -321,6 +318,45 @@ static void __init at91sam9261_initialize(void)
 	at91_gpio_init(at91sam9261_gpio, 3);
 }
 
+static struct resource rstc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9261_BASE_RSTC,
+		.end    = AT91SAM9261_BASE_RSTC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = AT91SAM9261_BASE_SDRAMC,
+		.end    = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rstc_device = {
+	.name           = "at91-sam9260-reset",
+	.resource       = rstc_resources,
+	.num_resources  = ARRAY_SIZE(rstc_resources),
+};
+
+static struct resource shdwc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9261_BASE_SHDWC,
+		.end    = AT91SAM9261_BASE_SHDWC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device shdwc_device = {
+	.name           = "at91-poweroff",
+	.resource       = shdwc_resources,
+	.num_resources  = ARRAY_SIZE(shdwc_resources),
+};
+
+static void __init at91sam9261_register_devices(void)
+{
+	platform_device_register(&rstc_device);
+	platform_device_register(&shdwc_device);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -363,6 +399,11 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
+static void __init at91sam9261_init_time(void)
+{
+	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
+}
+
 AT91_SOC_START(at91sam9261)
 	.map_io = at91sam9261_map_io,
 	.default_irq_priority = at91sam9261_default_irq_priority,
@@ -370,5 +411,7 @@ AT91_SOC_START(at91sam9261)
 		    | (1 << AT91SAM9261_ID_IRQ2),
 	.ioremap_registers = at91sam9261_ioremap_registers,
 	.register_clocks = at91sam9261_register_clocks,
+	.register_devices = at91sam9261_register_devices,
 	.init = at91sam9261_initialize,
+	.init_time = at91sam9261_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 810fa5f15a51..fbff228cc63e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
@@ -22,7 +23,6 @@
 #include <mach/hardware.h>
 
 #include "at91_aic.h"
-#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "sam9_smc.h"
@@ -321,8 +321,6 @@ static void __init at91sam9263_map_io(void)
 
 static void __init at91sam9263_ioremap_registers(void)
 {
-	at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
 	at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
 	at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
 	at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
@@ -335,7 +333,6 @@ static void __init at91sam9263_ioremap_registers(void)
 static void __init at91sam9263_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
 
 	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
 	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
@@ -344,6 +341,45 @@ static void __init at91sam9263_initialize(void)
 	at91_gpio_init(at91sam9263_gpio, 5);
 }
 
+static struct resource rstc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9263_BASE_RSTC,
+		.end    = AT91SAM9263_BASE_RSTC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = AT91SAM9263_BASE_SDRAMC0,
+		.end    = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rstc_device = {
+	.name           = "at91-sam9260-reset",
+	.resource       = rstc_resources,
+	.num_resources  = ARRAY_SIZE(rstc_resources),
+};
+
+static struct resource shdwc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9263_BASE_SHDWC,
+		.end    = AT91SAM9263_BASE_SHDWC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device shdwc_device = {
+	.name           = "at91-poweroff",
+	.resource       = shdwc_resources,
+	.num_resources  = ARRAY_SIZE(shdwc_resources),
+};
+
+static void __init at91sam9263_register_devices(void)
+{
+	platform_device_register(&rstc_device);
+	platform_device_register(&shdwc_device);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -386,11 +422,18 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ1) */
 };
 
+static void __init at91sam9263_init_time(void)
+{
+	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
+}
+
 AT91_SOC_START(at91sam9263)
 	.map_io = at91sam9263_map_io,
 	.default_irq_priority = at91sam9263_default_irq_priority,
 	.extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1),
 	.ioremap_registers = at91sam9263_ioremap_registers,
 	.register_clocks = at91sam9263_register_clocks,
+	.register_devices = at91sam9263_register_devices,
 	.init = at91sam9263_initialize,
+	.init_time = at91sam9263_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
deleted file mode 100644
index 0a9e2fc8f796..000000000000
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
- *
- * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
- * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
- * Converted to ClockSource/ClockEvents by David Brownell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-
-#define AT91_PIT_MR		0x00			/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		0x04			/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		0x08			/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		0x0c			/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
-#define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
-
-static u32 pit_cycle;		/* write-once */
-static u32 pit_cnt;		/* access only w/system irq blocked */
-static void __iomem *pit_base_addr __read_mostly;
-static struct clk *mck;
-
-static inline unsigned int pit_read(unsigned int reg_offset)
-{
-	return __raw_readl(pit_base_addr + reg_offset);
-}
-
-static inline void pit_write(unsigned int reg_offset, unsigned long value)
-{
-	__raw_writel(value, pit_base_addr + reg_offset);
-}
-
-/*
- * Clocksource:  just a monotonic counter of MCK/16 cycles.
- * We don't care whether or not PIT irqs are enabled.
- */
-static cycle_t read_pit_clk(struct clocksource *cs)
-{
-	unsigned long flags;
-	u32 elapsed;
-	u32 t;
-
-	raw_local_irq_save(flags);
-	elapsed = pit_cnt;
-	t = pit_read(AT91_PIT_PIIR);
-	raw_local_irq_restore(flags);
-
-	elapsed += PIT_PICNT(t) * pit_cycle;
-	elapsed += PIT_CPIV(t);
-	return elapsed;
-}
-
-static struct clocksource pit_clk = {
-	.name		= "pit",
-	.rating		= 175,
-	.read		= read_pit_clk,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-/*
- * Clockevent device:  interrupts every 1/HZ (== pit_cycles * MCK/16)
- */
-static void
-pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* update clocksource counter */
-		pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR));
-		pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
-				| AT91_PIT_PITIEN);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		BUG();
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq, leaving the clocksource active */
-		pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
-static void at91sam926x_pit_resume(struct clock_event_device *cedev)
-{
-	at91sam926x_pit_reset();
-}
-
-static struct clock_event_device pit_clkevt = {
-	.name		= "pit",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 32,
-	.rating		= 100,
-	.set_mode	= pit_clkevt_mode,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_resume,
-};
-
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * irqs should be disabled here, but as the irq is shared they are only
-	 * guaranteed to be off if the timer irq is registered first.
-	 */
-	WARN_ON_ONCE(!irqs_disabled());
-
-	/* The PIT interrupt may be disabled, and is shared */
-	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-			&& (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
-		unsigned nr_ticks;
-
-		/* Get number of ticks performed before irq, and ack it */
-		nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR));
-		do {
-			pit_cnt += pit_cycle;
-			pit_clkevt.event_handler(&pit_clkevt);
-			nr_ticks--;
-		} while (nr_ticks);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-static struct irqaction at91sam926x_pit_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91sam926x_pit_interrupt,
-	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
-};
-
-#ifdef CONFIG_OF
-static struct of_device_id pit_timer_ids[] = {
-	{ .compatible = "atmel,at91sam9260-pit" },
-	{ /* sentinel */ }
-};
-
-static int __init of_at91sam926x_pit_init(void)
-{
-	struct device_node	*np;
-	int			ret;
-
-	np = of_find_matching_node(NULL, pit_timer_ids);
-	if (!np)
-		goto err;
-
-	pit_base_addr = of_iomap(np, 0);
-	if (!pit_base_addr)
-		goto node_err;
-
-	mck = of_clk_get(np, 0);
-
-	/* Get the interrupts property */
-	ret = irq_of_parse_and_map(np, 0);
-	if (!ret) {
-		pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
-		if (!IS_ERR(mck))
-			clk_put(mck);
-		goto ioremap_err;
-	}
-	at91sam926x_pit_irq.irq = ret;
-
-	of_node_put(np);
-
-	return 0;
-
-ioremap_err:
-	iounmap(pit_base_addr);
-node_err:
-	of_node_put(np);
-err:
-	return -EINVAL;
-}
-#else
-static int __init of_at91sam926x_pit_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
-/*
- * Set up both clocksource and clockevent support.
- */
-void __init at91sam926x_pit_init(void)
-{
-	unsigned long	pit_rate;
-	unsigned	bits;
-	int		ret;
-
-	mck = ERR_PTR(-ENOENT);
-
-	/* For device tree enabled device: initialize here */
-	of_at91sam926x_pit_init();
-
-	/*
-	 * Use our actual MCK to figure out how many MCK/16 ticks per
-	 * 1/HZ period (instead of a compile-time constant LATCH).
-	 */
-	if (IS_ERR(mck))
-		mck = clk_get(NULL, "mck");
-
-	if (IS_ERR(mck))
-		panic("AT91: PIT: Unable to get mck clk\n");
-	pit_rate = clk_get_rate(mck) / 16;
-	pit_cycle = (pit_rate + HZ/2) / HZ;
-	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
-
-	/* Initialize and enable the timer */
-	at91sam926x_pit_reset();
-
-	/*
-	 * Register clocksource.  The high order bits of PIV are unused,
-	 * so this isn't a 32-bit counter unless we get clockevent irqs.
-	 */
-	bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
-	pit_clk.mask = CLOCKSOURCE_MASK(bits);
-	clocksource_register_hz(&pit_clk, pit_rate);
-
-	/* Set up irq handler */
-	ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
-	if (ret)
-		pr_crit("AT91: PIT: Unable to setup IRQ\n");
-
-	/* Set up and register clockevents */
-	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
-	pit_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&pit_clkevt);
-}
-
-void __init at91sam926x_ioremap_pit(u32 addr)
-{
-#if defined(CONFIG_OF)
-	struct device_node *np =
-		of_find_matching_node(NULL, pit_timer_ids);
-
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-	pit_base_addr = ioremap(addr, 16);
-
-	if (!pit_base_addr)
-		panic("Impossible to ioremap PIT\n");
-}
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
deleted file mode 100644
index f039538d3bdb..000000000000
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * reset AT91SAM9G20 as per errata
- *
- * (C) BitBox Ltd 2010
- *
- * unless the SDRAM is cleanly shutdown before we hit the
- * reset register it can be left driving the data bus and
- * killing the chance of a subsequent boot from NAND
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/linkage.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-#include "at91_rstc.h"
-
-			.arm
-
-			.globl	at91sam9_alt_restart
-
-at91sam9_alt_restart:	ldr	r0, =at91_ramc_base		@ preload constants
-			ldr	r0, [r0]
-			ldr	r4, =at91_rstc_base
-			ldr	r1, [r4]
-
-			mov	r2, #1
-			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
-			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
-
-			.balign	32				@ align to cache line
-
-			str	r2, [r0, #AT91_SDRAMC_TR]	@ disable SDRAM access
-			str	r3, [r0, #AT91_SDRAMC_LPR]	@ power down SDRAM
-			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
-
-			b	.
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 9d45496e4932..405427ec05f8 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk/at91_pmc.h>
+#include <linux/platform_device.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -371,8 +372,6 @@ static void __init at91sam9g45_map_io(void)
 
 static void __init at91sam9g45_ioremap_registers(void)
 {
-	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
 	at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
 	at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
@@ -384,7 +383,6 @@ static void __init at91sam9g45_ioremap_registers(void)
 static void __init at91sam9g45_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9g45_restart;
 
 	at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
 	at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
@@ -393,6 +391,50 @@ static void __init at91sam9g45_initialize(void)
 	at91_gpio_init(at91sam9g45_gpio, 5);
 }
 
+static struct resource rstc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9G45_BASE_RSTC,
+		.end    = AT91SAM9G45_BASE_RSTC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = AT91SAM9G45_BASE_DDRSDRC1,
+		.end    = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = AT91SAM9G45_BASE_DDRSDRC0,
+		.end    = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rstc_device = {
+	.name           = "at91-sam9g45-reset",
+	.resource       = rstc_resources,
+	.num_resources  = ARRAY_SIZE(rstc_resources),
+};
+
+static struct resource shdwc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9G45_BASE_SHDWC,
+		.end    = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device shdwc_device = {
+	.name           = "at91-poweroff",
+	.resource       = shdwc_resources,
+	.num_resources  = ARRAY_SIZE(shdwc_resources),
+};
+
+static void __init at91sam9g45_register_devices(void)
+{
+	platform_device_register(&rstc_device);
+	platform_device_register(&shdwc_device);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -435,11 +477,18 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ0) */
 };
 
+static void __init at91sam9g45_init_time(void)
+{
+	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
+}
+
 AT91_SOC_START(at91sam9g45)
 	.map_io = at91sam9g45_map_io,
 	.default_irq_priority = at91sam9g45_default_irq_priority,
 	.extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
 	.ioremap_registers = at91sam9g45_ioremap_registers,
 	.register_clocks = at91sam9g45_register_clocks,
+	.register_devices = at91sam9g45_register_devices,
 	.init = at91sam9g45_initialize,
+	.init_time = at91sam9g45_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
deleted file mode 100644
index c40c1e2ef80f..000000000000
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * reset AT91SAM9G45 as per errata
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
- *
- * unless the SDRAM is cleanly shutdown before we hit the
- * reset register it can be left driving the data bus and
- * killing the chance of a subsequent boot from NAND
- *
- * GPLv2 Only
- */
-
-#include <linux/linkage.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-#include "at91_rstc.h"
-			.arm
-
-/*
- * at91_ramc_base is an array void*
- * init at NULL if only one DDR controler is present in or DT
- */
-			.globl	at91sam9g45_restart
-
-at91sam9g45_restart:
-			ldr	r5, =at91_ramc_base		@ preload constants
-			ldr	r0, [r5]
-			ldr	r5, [r5, #4]			@ ddr1
-			cmp	r5, #0
-			ldr	r4, =at91_rstc_base
-			ldr	r1, [r4]
-
-			mov	r2, #1
-			mov	r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
-			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
-
-			.balign	32				@ align to cache line
-
-			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
-			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
-			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
-			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
-			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
-
-			b	.
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 878d5015daab..f553e4ea034b 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
@@ -23,7 +24,6 @@
 #include <mach/hardware.h>
 
 #include "at91_aic.h"
-#include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
 #include "sam9_smc.h"
@@ -311,8 +311,6 @@ static void __init at91sam9rl_map_io(void)
 
 static void __init at91sam9rl_ioremap_registers(void)
 {
-	at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
 	at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
@@ -323,7 +321,6 @@ static void __init at91sam9rl_ioremap_registers(void)
 static void __init at91sam9rl_initialize(void)
 {
 	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
 
 	at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
 	at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
@@ -332,6 +329,45 @@ static void __init at91sam9rl_initialize(void)
 	at91_gpio_init(at91sam9rl_gpio, 4);
 }
 
+static struct resource rstc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9RL_BASE_RSTC,
+		.end    = AT91SAM9RL_BASE_RSTC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = AT91SAM9RL_BASE_SDRAMC,
+		.end    = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rstc_device = {
+	.name           = "at91-sam9260-reset",
+	.resource       = rstc_resources,
+	.num_resources  = ARRAY_SIZE(rstc_resources),
+};
+
+static struct resource shdwc_resources[] = {
+	[0] = {
+		.start  = AT91SAM9RL_BASE_SHDWC,
+		.end    = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device shdwc_device = {
+	.name           = "at91-poweroff",
+	.resource       = shdwc_resources,
+	.num_resources  = ARRAY_SIZE(shdwc_resources),
+};
+
+static void __init at91sam9rl_register_devices(void)
+{
+	platform_device_register(&rstc_device);
+	platform_device_register(&shdwc_device);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -374,6 +410,11 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
+static void __init at91sam9rl_init_time(void)
+{
+	at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
+}
+
 AT91_SOC_START(at91sam9rl)
 	.map_io = at91sam9rl_map_io,
 	.default_irq_priority = at91sam9rl_default_irq_priority,
@@ -382,5 +423,7 @@ AT91_SOC_START(at91sam9rl)
 #if defined(CONFIG_OLD_CLK_AT91)
 	.register_clocks = at91sam9rl_register_clocks,
 #endif
+	.register_devices = at91sam9rl_register_devices,
 	.init = at91sam9rl_initialize,
+	.init_time = at91sam9rl_init_time,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 597c649170aa..e76e35ce81e7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -167,6 +167,8 @@ static struct at91_cf_data afeb9260_cf_data = {
 
 static void __init afeb9260_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -211,7 +213,7 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= afeb9260_init_early,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index a30502c8d379..ae827dd2d0d2 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -170,6 +170,8 @@ static void __init cam60_add_device_nand(void)
 
 static void __init cam60_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -188,7 +190,7 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cam60_init_early,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 2037f78c84e7..731c8318f4f5 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -322,6 +322,8 @@ static struct mci_platform_data __initdata cpu9krea_mci0_data = {
 
 static void __init cpu9krea_board_init(void)
 {
+	at91_register_devices();
+
 	/* NOR */
 	cpu9krea_add_device_nor();
 	/* Serial */
@@ -375,7 +377,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpu9krea_init_early,
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index dfa8d48146fe..d3048ccdc41f 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -25,15 +25,6 @@
 #include "board.h"
 #include "generic.h"
 
-
-static void __init sam9_dt_timer_init(void)
-{
-#if defined(CONFIG_COMMON_CLK)
-	of_clk_init(NULL);
-#endif
-	at91sam926x_pit_init();
-}
-
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
@@ -41,7 +32,6 @@ static const char *at91_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
-	.init_time	= sam9_dt_timer_init,
 	.map_io		= at91_map_io,
 	.init_early	= at91_dt_initialize,
 	.dt_compat	= at91_dt_board_compat,
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 6a064e53f4d6..129e2917506b 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -27,14 +27,6 @@
 #include "at91_aic.h"
 #include "generic.h"
 
-static void __init sama5_dt_timer_init(void)
-{
-#if defined(CONFIG_COMMON_CLK)
-	of_clk_init(NULL);
-#endif
-	at91sam926x_pit_init();
-}
-
 static void __init sama5_dt_device_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -47,7 +39,6 @@ static const char *sama5_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
 	/* Maintainer: Atmel */
-	.init_time	= sama5_dt_timer_init,
 	.map_io		= at91_map_io,
 	.init_early	= at91_dt_initialize,
 	.init_machine	= sama5_dt_device_init,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 68f1ab6bd08f..a6aa4a2432f2 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -138,6 +138,8 @@ static struct gpio_led flexibity_leds[] = {
 
 static void __init flexibity_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -160,7 +162,7 @@ static void __init flexibity_board_init(void)
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= flexibity_init_early,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index b729dd1271bf..bf5cc55c7db6 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -576,7 +576,7 @@ static void __init gsia18s_board_init(void)
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= gsia18s_init_early,
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index b48d95ec5152..9c26b94ce448 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -219,7 +219,7 @@ static void __init pcontrol_g20_board_init(void)
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= pcontrol_g20_init_early,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index d24dda67e2d3..c2166e3a236c 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -187,6 +187,8 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -219,7 +221,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 65dea12d685e..bf8a946b4cd0 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -45,7 +45,6 @@
 #include <mach/system_rev.h>
 
 #include "at91_aic.h"
-#include "at91_shdwc.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
@@ -307,6 +306,8 @@ static void __init ek_add_device_buttons(void) {}
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -344,7 +345,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 4637432de08f..e85ada820bfb 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -49,7 +49,6 @@
 #include <mach/system_rev.h>
 
 #include "at91_aic.h"
-#include "at91_shdwc.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
@@ -561,6 +560,8 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -603,7 +604,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -613,7 +614,7 @@ MACHINE_END
 
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index fc446097f410..d76680f2a209 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -50,7 +50,6 @@
 #include <mach/system_rev.h>
 
 #include "at91_aic.h"
-#include "at91_shdwc.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
@@ -439,6 +438,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -483,7 +484,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index e1be6e25b380..49f075213451 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -410,7 +410,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -420,7 +420,7 @@ MACHINE_END
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index b227732b0c83..a517c7f7af92 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -48,7 +48,6 @@
 #include <mach/system_rev.h>
 
 #include "at91_aic.h"
-#include "at91_shdwc.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
@@ -471,6 +470,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -517,7 +518,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b64648b4a1fc..8bca329b0293 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -35,7 +35,6 @@
 
 
 #include "at91_aic.h"
-#include "at91_shdwc.h"
 #include "board.h"
 #include "sam9_smc.h"
 #include "generic.h"
@@ -292,6 +291,8 @@ static void __init ek_add_device_buttons(void) {}
 
 static void __init ek_board_init(void)
 {
+	at91_register_devices();
+
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -323,7 +324,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 1b870e6def0c..b4aff840a1a0 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -154,6 +154,8 @@ static void __init snapper9260_add_device_nand(void)
 
 static void __init snapper9260_board_init(void)
 {
+	at91_register_devices();
+
 	at91_add_device_i2c(snapper9260_i2c_devices,
 			    ARRAY_SIZE(snapper9260_i2c_devices));
 
@@ -178,7 +180,7 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= snapper9260_init_early,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 3b575036ff96..e825641a1dee 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -275,7 +275,7 @@ static void __init stamp9g20evb_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
@@ -285,7 +285,7 @@ MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= at91_init_time,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index cddf1e51c50e..81959cf4a137 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -8,6 +8,9 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef _AT91_GENERIC_H
+#define _AT91_GENERIC_H
+
 #include <linux/clkdev.h>
 #include <linux/of.h>
 #include <linux/reboot.h>
@@ -38,12 +41,15 @@ extern int  __init at91_aic5_of_init(struct device_node *node,
 extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
 extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
 
+ /* Devices */
+extern void __init at91_register_devices(void);
 
  /* Timer */
+extern void __init at91_init_time(void);
 extern void at91rm9200_ioremap_st(u32 addr);
 extern void at91rm9200_timer_init(void);
 extern void at91sam926x_ioremap_pit(u32 addr);
-extern void at91sam926x_pit_init(void);
+extern void at91sam926x_pit_init(int irq);
 extern void at91x40_timer_init(void);
 
  /* Clocks */
@@ -63,14 +69,6 @@ extern void at91_irq_resume(void);
 /* idle */
 extern void at91sam9_idle(void);
 
-/* reset */
-extern void at91_ioremap_rstc(u32 base_addr);
-extern void at91sam9_alt_restart(enum reboot_mode, const char *);
-extern void at91sam9g45_restart(enum reboot_mode, const char *);
-
-/* shutdown */
-extern void at91_ioremap_shdwc(u32 base_addr);
-
 /* Matrix */
 extern void at91_ioremap_matrix(u32 base_addr);
 
@@ -91,3 +89,5 @@ extern int  __init at91_gpio_of_irq_setup(struct device_node *node,
 					  struct device_node *parent);
 
 extern u32 at91_get_extern_irq(void);
+
+#endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5920373809c5..4073ab7f38f3 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -34,79 +34,8 @@
 #include "pm.h"
 #include "gpio.h"
 
-/*
- * Show the reason for the previous system reset.
- */
-
-#include "at91_rstc.h"
-#include "at91_shdwc.h"
-
 static void (*at91_pm_standby)(void);
 
-static void __init show_reset_status(void)
-{
-	static char reset[] __initdata = "reset";
-
-	static char general[] __initdata = "general";
-	static char wakeup[] __initdata = "wakeup";
-	static char watchdog[] __initdata = "watchdog";
-	static char software[] __initdata = "software";
-	static char user[] __initdata = "user";
-	static char unknown[] __initdata = "unknown";
-
-	static char signal[] __initdata = "signal";
-	static char rtc[] __initdata = "rtc";
-	static char rtt[] __initdata = "rtt";
-	static char restore[] __initdata = "power-restored";
-
-	char *reason, *r2 = reset;
-	u32 reset_type, wake_type;
-
-	if (!at91_shdwc_base || !at91_rstc_base)
-		return;
-
-	reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-	wake_type = at91_shdwc_read(AT91_SHDW_SR);
-
-	switch (reset_type) {
-	case AT91_RSTC_RSTTYP_GENERAL:
-		reason = general;
-		break;
-	case AT91_RSTC_RSTTYP_WAKEUP:
-		/* board-specific code enabled the wakeup sources */
-		reason = wakeup;
-
-		/* "wakeup signal" */
-		if (wake_type & AT91_SHDW_WAKEUP0)
-			r2 = signal;
-		else {
-			r2 = reason;
-			if (wake_type & AT91_SHDW_RTTWK)	/* rtt wakeup */
-				reason = rtt;
-			else if (wake_type & AT91_SHDW_RTCWK)	/* rtc wakeup */
-				reason = rtc;
-			else if (wake_type == 0)	/* power-restored wakeup */
-				reason = restore;
-			else				/* unknown wakeup */
-				reason = unknown;
-		}
-		break;
-	case AT91_RSTC_RSTTYP_WATCHDOG:
-		reason = watchdog;
-		break;
-	case AT91_RSTC_RSTTYP_SOFTWARE:
-		reason = software;
-		break;
-	case AT91_RSTC_RSTTYP_USER:
-		reason = user;
-		break;
-	default:
-		reason = unknown;
-		break;
-	}
-	pr_info("AT91: Starting after %s %s\n", reason, r2);
-}
-
 static int at91_pm_valid_state(suspend_state_t state)
 {
 	switch (state) {
@@ -346,7 +275,6 @@ static int __init at91_pm_init(void)
 
 	suspend_set_ops(&at91_pm_ops);
 
-	show_reset_status();
 	return 0;
 }
 arch_initcall(at91_pm_init);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index ebe7fdca9e83..961079250b83 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -5,6 +5,8 @@
  * Under GPLv2
  */
 
+#define pr_fmt(fmt)	"AT91: " fmt
+
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -20,7 +22,6 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 
-#include "at91_shdwc.h"
 #include "soc.h"
 #include "generic.h"
 #include "pm.h"
@@ -37,7 +38,7 @@ void __init at91rm9200_set_type(int type)
 	else
 		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 
-	pr_info("AT91: filled in soc subtype: %s\n",
+	pr_info("filled in soc subtype: %s\n",
 		at91_get_soc_subtype(&at91_soc_initdata));
 }
 
@@ -67,7 +68,7 @@ void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 	}
 	at91_ramc_base[id] = ioremap(addr, size);
 	if (!at91_ramc_base[id])
-		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+		panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr);
 }
 
 static struct map_desc sram_desc[2] __initdata;
@@ -84,7 +85,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
 	desc->length = length;
 	desc->type = MT_MEMORY_RWX_NONCACHED;
 
-	pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
+	pr_info("sram at 0x%lx of 0x%x mapped at 0x%lx\n",
 		base, length, desc->virtual);
 
 	iotable_init(desc, 1);
@@ -367,45 +368,21 @@ void __init at91_map_io(void)
 		soc_detect(AT91_BASE_DBGU1);
 
 	if (!at91_soc_is_detected())
-		panic("AT91: Impossible to detect the SOC type");
+		panic(pr_fmt("Impossible to detect the SOC type"));
 
-	pr_info("AT91: Detected soc type: %s\n",
+	pr_info("Detected soc type: %s\n",
 		at91_get_soc_type(&at91_soc_initdata));
 	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
-		pr_info("AT91: Detected soc subtype: %s\n",
+		pr_info("Detected soc subtype: %s\n",
 			at91_get_soc_subtype(&at91_soc_initdata));
 
 	if (!at91_soc_is_enabled())
-		panic("AT91: Soc not enabled");
+		panic(pr_fmt("Soc not enabled"));
 
 	if (at91_boot_soc.map_io)
 		at91_boot_soc.map_io();
 }
 
-void __iomem *at91_shdwc_base = NULL;
-
-static void at91sam9_poweroff(void)
-{
-	at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-void __init at91_ioremap_shdwc(u32 base_addr)
-{
-	at91_shdwc_base = ioremap(base_addr, 16);
-	if (!at91_shdwc_base)
-		panic("Impossible to ioremap at91_shdwc_base\n");
-	pm_power_off = at91sam9_poweroff;
-}
-
-void __iomem *at91_rstc_base;
-
-void __init at91_ioremap_rstc(u32 base_addr)
-{
-	at91_rstc_base = ioremap(base_addr, 16);
-	if (!at91_rstc_base)
-		panic("Impossible to ioremap at91_rstc_base\n");
-}
-
 void __init at91_alt_map_io(void)
 {
 	/* Map peripherals */
@@ -438,42 +415,15 @@ void __init at91_ioremap_matrix(u32 base_addr)
 {
 	at91_matrix_base = ioremap(base_addr, 512);
 	if (!at91_matrix_base)
-		panic("Impossible to ioremap at91_matrix_base\n");
+		panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
 }
 
 #if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
-static struct of_device_id rstc_ids[] = {
-	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
-	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
-	{ /*sentinel*/ }
-};
-
-static void at91_dt_rstc(void)
-{
-	struct device_node *np;
-	const struct of_device_id *of_id;
-
-	np = of_find_matching_node(NULL, rstc_ids);
-	if (!np)
-		panic("unable to find compatible rstc node in dtb\n");
-
-	at91_rstc_base = of_iomap(np, 0);
-	if (!at91_rstc_base)
-		panic("unable to map rstc cpu registers\n");
-
-	of_id = of_match_node(rstc_ids, np);
-	if (!of_id)
-		panic("AT91: rtsc no restart function available\n");
-
-	arm_pm_restart = of_id->data;
-
-	of_node_put(np);
-}
-
 static struct of_device_id ramc_ids[] = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
 	{ /*sentinel*/ }
 };
 
@@ -481,100 +431,29 @@ static void at91_dt_ramc(void)
 {
 	struct device_node *np;
 	const struct of_device_id *of_id;
+	int idx = 0;
+	const void *standby = NULL;
 
-	np = of_find_matching_node(NULL, ramc_ids);
-	if (!np)
-		panic("unable to find compatible ram controller node in dtb\n");
-
-	at91_ramc_base[0] = of_iomap(np, 0);
-	if (!at91_ramc_base[0])
-		panic("unable to map ramc[0] cpu registers\n");
-	/* the controller may have 2 banks */
-	at91_ramc_base[1] = of_iomap(np, 1);
-
-	of_id = of_match_node(ramc_ids, np);
-	if (!of_id)
-		pr_warn("AT91: ramc no standby function available\n");
-	else
-		at91_pm_set_standby(of_id->data);
-
-	of_node_put(np);
-}
-
-static struct of_device_id shdwc_ids[] = {
-	{ .compatible = "atmel,at91sam9260-shdwc", },
-	{ .compatible = "atmel,at91sam9rl-shdwc", },
-	{ .compatible = "atmel,at91sam9x5-shdwc", },
-	{ /*sentinel*/ }
-};
-
-static const char *shdwc_wakeup_modes[] = {
-	[AT91_SHDW_WKMODE0_NONE]	= "none",
-	[AT91_SHDW_WKMODE0_HIGH]	= "high",
-	[AT91_SHDW_WKMODE0_LOW]		= "low",
-	[AT91_SHDW_WKMODE0_ANYLEVEL]	= "any",
-};
+	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
+		at91_ramc_base[idx] = of_iomap(np, 0);
+		if (!at91_ramc_base[idx])
+			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
 
-const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
-{
-	const char *pm;
-	int err, i;
-
-	err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
-	if (err < 0)
-		return AT91_SHDW_WKMODE0_ANYLEVEL;
-
-	for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
-		if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
-			return i;
-
-	return -ENODEV;
-}
-
-static void at91_dt_shdwc(void)
-{
-	struct device_node *np;
-	int wakeup_mode;
-	u32 reg;
-	u32 mode = 0;
+		if (!standby)
+			standby = of_id->data;
 
-	np = of_find_matching_node(NULL, shdwc_ids);
-	if (!np) {
-		pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n");
-		return;
+		idx++;
 	}
 
-	at91_shdwc_base = of_iomap(np, 0);
-	if (!at91_shdwc_base)
-		panic("AT91: unable to map shdwc cpu registers\n");
-
-	wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
-	if (wakeup_mode < 0) {
-		pr_warn("AT91: shdwc unknown wakeup mode\n");
-		goto end;
-	}
+	if (!idx)
+		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
 
-	if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
-		if (reg > AT91_SHDW_CPTWK0_MAX) {
-			pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
-				reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
-			reg = AT91_SHDW_CPTWK0_MAX;
-		}
-		mode |= AT91_SHDW_CPTWK0_(reg);
+	if (!standby) {
+		pr_warn("ramc no standby function available\n");
+		return;
 	}
 
-	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
-			mode |= AT91_SHDW_RTCWKEN;
-
-	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
-			mode |= AT91_SHDW_RTTWKEN;
-
-	at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
-
-end:
-	pm_power_off = at91sam9_poweroff;
-
-	of_node_put(np);
+	at91_pm_set_standby(standby);
 }
 
 void __init at91rm9200_dt_initialize(void)
@@ -593,9 +472,7 @@ void __init at91rm9200_dt_initialize(void)
 
 void __init at91_dt_initialize(void)
 {
-	at91_dt_rstc();
 	at91_dt_ramc();
-	at91_dt_shdwc();
 
 	/* Init clock subsystem */
 	at91_dt_clock_init();
@@ -623,3 +500,13 @@ void __init at91_initialize(unsigned long main_clock)
 
 	pinctrl_provide_dummies();
 }
+
+void __init at91_register_devices(void)
+{
+	at91_boot_soc.register_devices();
+}
+
+void __init at91_init_time(void)
+{
+	at91_boot_soc.init_time();
+}
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 8ecaee67f953..9a8fd97a8bef 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -11,7 +11,9 @@ struct at91_init_soc {
 	void (*map_io)(void);
 	void (*ioremap_registers)(void);
 	void (*register_clocks)(void);
+	void (*register_devices)(void);
 	void (*init)(void);
+	void (*init_time)(void);
 };
 
 extern struct at91_init_soc at91_boot_soc;