Merge tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/soc

Merge "at91: cleanup for 3.20 #2" from Nicolas Ferre:

Second batch of cleanup for 3.20:
- By reworking the PM code, we can remove the AT91 more specific initialization
- We are using DT for SRAM initialization now, so we can remove its explicit
  mapping
- The PMC clock driver now hosts IDLE function for at91rm9200 with other
  SoCs ones.

* tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (37 commits)
  ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c
  ARM: at91: remove unused at91_init_sram
  ARM: at91: sama5d4: remove useless call to at91_init_sram
  ARM: at91: remove useless map_io
  ARM: at91: pm: prepare for multiplatform
  ARM: at91: pm: add UDP and UHP checks to newer SoCs
  ARM: at91: pm: use the mmio-sram pool to access SRAM
  ARM: at91: pm: rework cpu detection
  ARM: at91: dts: sama5d3: add ov2640 camera sensor support
  ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
  ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
  ARM: at91: dts: sama5d3: move the isi mck pin to mb
  ARM: at91: dts: sama5d3: add missing pins of isi
  ARM: at91: dts: sama5d3: split isi pinctrl
  ARM: at91: dts: sama5d3: add isi clock
  ARM: at91/dt: ethernut5: use at91sam9xe.dtsi
  ARM: at91/dt: Add a dtsi for at91sam9xe
  ARM: at91/dt: add SRAM nodes
  ARM: at91/dt: at91rm9200ek: enable RTC
  ARM: at91/dt: rm9200: add RTC node
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 49 insertions, 0 deletions

diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
new file mode 100644
index 000000000000..80a6501b4d50
--- /dev/null
+++ b/arch/arm/include/debug/at91.S
@@ -0,0 +1,49 @@
+/*
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
+#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
+#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
+#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
+#else
+/* On sama5d4, use USART3 as low level serial console */
+#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
+#endif
+
+/* Keep in sync with mach-at91/include/mach/hardware.h */
+#define AT91_IO_P2V(x) ((x) - 0x01000000)
+
+#define AT91_DBGU_SR		(0x14)	/* Status Register */
+#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY	(1 << 9)	/* Transmitter Empty */
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =AT91_DBGU				@ System peripherals (phys address)
+	ldr	\rv, =AT91_IO_P2V(AT91_DBGU)		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #(AT91_DBGU_THR)]		@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY			@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY			@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+