Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

1 files changed, 67 insertions, 47 deletions

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index cce1d874c7a5..d6265ca97119 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -36,6 +36,14 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				792000  1100000
+				396000  950000
+				198000  850000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			cpu0-supply = <&reg_cpu>;
 		};
 
 		cpu@1 {
@@ -100,7 +108,7 @@
 			clocks = <&clks 106>;
 		};
 
-		gpmi-nand@00112000 {
+		nfc: gpmi-nand@00112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -144,12 +152,12 @@
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif@02004000 {
+				spdif: spdif@02004000 {
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
 				};
 
-				ecspi@02008000 { /* eCSPI1 */
+				ecspi1: ecspi@02008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -160,7 +168,7 @@
 					status = "disabled";
 				};
 
-				ecspi@0200c000 { /* eCSPI2 */
+				ecspi2: ecspi@0200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -171,7 +179,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02010000 { /* eCSPI3 */
+				ecspi3: ecspi@02010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -182,7 +190,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02014000 { /* eCSPI4 */
+				ecspi4: ecspi@02014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -193,7 +201,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02018000 { /* eCSPI5 */
+				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +221,7 @@
 					status = "disabled";
 				};
 
-				esai@02024000 {
+				esai: esai@02024000 {
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 0x04>;
 				};
@@ -248,7 +256,7 @@
 					status = "disabled";
 				};
 
-				asrc@02034000 {
+				asrc: asrc@02034000 {
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 0x04>;
 				};
@@ -258,7 +266,7 @@
 				};
 			};
 
-			vpu@02040000 {
+			vpu: vpu@02040000 {
 				reg = <0x02040000 0x3c000>;
 				interrupts = <0 3 0x04 0 12 0x04>;
 			};
@@ -267,7 +275,7 @@
 				reg = <0x0207c000 0x4000>;
 			};
 
-			pwm@02080000 { /* PWM1 */
+			pwm1: pwm@02080000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
@@ -276,7 +284,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm@02084000 { /* PWM2 */
+			pwm2: pwm@02084000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
@@ -285,7 +293,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm@02088000 { /* PWM3 */
+			pwm3: pwm@02088000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
@@ -294,7 +302,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm@0208c000 { /* PWM4 */
+			pwm4: pwm@0208c000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
@@ -303,17 +311,17 @@
 				clock-names = "ipg", "per";
 			};
 
-			flexcan@02090000 { /* CAN1 */
+			can1: flexcan@02090000 {
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 0x04>;
 			};
 
-			flexcan@02094000 { /* CAN2 */
+			can2: flexcan@02094000 {
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 0x04>;
 			};
 
-			gpt@02098000 {
+			gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 0x04>;
@@ -389,19 +397,19 @@
 				#interrupt-cells = <2>;
 			};
 
-			kpp@020b8000 {
+			kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 0x04>;
 			};
 
-			wdog@020bc000 { /* WDOG1 */
+			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@020c0000 { /* WDOG2 */
+			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
@@ -463,7 +471,7 @@
 					anatop-max-voltage = <2750000>;
 				};
 
-				regulator-vddcore@140 {
+				reg_cpu: regulator-vddcore@140 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "cpu";
 					regulator-min-microvolt = <725000>;
@@ -521,27 +529,35 @@
 			};
 
 			snvs@020cc000 {
-				reg = <0x020cc000 0x4000>;
-				interrupts = <0 19 0x04 0 20 0x04>;
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <0 19 0x04 0 20 0x04>;
+				};
 			};
 
-			epit@020d0000 { /* EPIT1 */
+			epit1: epit@020d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
 				interrupts = <0 56 0x04>;
 			};
 
-			epit@020d4000 { /* EPIT2 */
+			epit2: epit@020d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
 				interrupts = <0 57 0x04>;
 			};
 
-			src@020d8000 {
+			src: src@020d8000 {
 				compatible = "fsl,imx6q-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 0x04 0 96 0x04>;
 			};
 
-			gpc@020dc000 {
+			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupts = <0 89 0x04 0 90 0x04>;
@@ -552,7 +568,7 @@
 				reg = <0x020e0000 0x38>;
 			};
 
-			iomuxc@020e0000 {
+			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
@@ -765,17 +781,17 @@
 				};
 			};
 
-			dcic@020e4000 { /* DCIC1 */
+			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
 				interrupts = <0 124 0x04>;
 			};
 
-			dcic@020e8000 { /* DCIC2 */
+			dcic2: dcic@020e8000 {
 				reg = <0x020e8000 0x4000>;
 				interrupts = <0 125 0x04>;
 			};
 
-			sdma@020ec000 {
+			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
@@ -801,7 +817,7 @@
 				reg = <0x0217c000 0x4000>;
 			};
 
-			usb@02184000 { /* USB OTG */
+			usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
@@ -811,7 +827,7 @@
 				status = "disabled";
 			};
 
-			usb@02184200 { /* USB1 */
+			usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
@@ -821,7 +837,7 @@
 				status = "disabled";
 			};
 
-			usb@02184400 { /* USB2 */
+			usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
@@ -830,7 +846,7 @@
 				status = "disabled";
 			};
 
-			usb@02184600 { /* USB3 */
+			usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
@@ -839,14 +855,14 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc@02184800 {
+			usbmisc: usbmisc: usbmisc@02184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks 162>;
 			};
 
-			ethernet@02188000 {
+			fec: ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
@@ -860,43 +876,47 @@
 				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 			};
 
-			usdhc@02190000 { /* uSDHC1 */
+			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
 				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02194000 { /* uSDHC2 */
+			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
 				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02198000 { /* uSDHC3 */
+			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
 				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@0219c000 { /* uSDHC4 */
+			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
 				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			i2c@021a0000 { /* I2C1 */
+			i2c1: i2c@021a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -906,7 +926,7 @@
 				status = "disabled";
 			};
 
-			i2c@021a4000 { /* I2C2 */
+			i2c2: i2c@021a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -916,7 +936,7 @@
 				status = "disabled";
 			};
 
-			i2c@021a8000 { /* I2C3 */
+			i2c3: i2c@021a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -930,12 +950,12 @@
 				reg = <0x021ac000 0x4000>;
 			};
 
-			mmdc@021b0000 { /* MMDC0 */
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
 				compatible = "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
 			};
 
-			mmdc@021b4000 { /* MMDC1 */
+			mmdc1: mmdc@021b4000 { /* MMDC1 */
 				reg = <0x021b4000 0x4000>;
 			};
 
@@ -963,7 +983,7 @@
 				interrupts = <0 109 0x04>;
 			};
 
-			audmux@021d8000 {
+			audmux: audmux@021d8000 {
 				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";