Merge tag 'asoc-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v4.5

This is quite a busy release on the driver front with a lot of new
drivers being added but comparatively quiet on the core side with only
one big change going in and that a fairly straightforward refactoring.

 - Conversion of the array of DAI links to a list by Mengdong Lin,
   supporting dynamically adding and removing DAI links.
 - Some more fixes for the topology code, though it is still not final
   and ready for enabling in production.  We really need to get to the
   point where that can be done.
 - A pile of changes for Intel SkyLake drivers which hopefully deliver
   some useful initial functionality for systems with this chipset,
   though there is more work still to come.
 - New drivers for a number of Imagination Technologies IPs.
 - Lots of new features and cleanups for the Renesas drivers.
 - ANC support for WM5110.
 - New driver for Atmel class D speaker drivers.
 - New drivers for Cirrus CS47L24 and WM1831.
 - New driver for Dialog DA7128.
 - New drivers for Realtek RT5659 and RT56156.
 - New driver for Rockchip RK3036.
 - New driver for TI PC3168A

25 files changed, 763 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt
index 15a919522b42..1783f9ef0930 100644
--- a/Documentation/devicetree/bindings/sound/ak4613.txt
+++ b/Documentation/devicetree/bindings/sound/ak4613.txt
@@ -7,6 +7,16 @@ Required properties:
 - compatible : "asahi-kasei,ak4613"
 - reg : The chip select number on the I2C bus
 
+Optional properties:
+- asahi-kasei,in1-single-end	: Boolean. Indicate input / output pins are single-ended.
+- asahi-kasei,in2-single-end	  rather than differential.
+- asahi-kasei,out1-single-end
+- asahi-kasei,out2-single-end
+- asahi-kasei,out3-single-end
+- asahi-kasei,out4-single-end
+- asahi-kasei,out5-single-end
+- asahi-kasei,out6-single-end
+
 Example:
 
 &i2c {
diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt
index 0018451c4351..549e701cb7a1 100644
--- a/Documentation/devicetree/bindings/sound/atmel-classd.txt
+++ b/Documentation/devicetree/bindings/sound/atmel-classd.txt
@@ -16,6 +16,10 @@ Required properties:
 	Required elements: "pclk", "gclk" and "aclk".
 - clocks
 	Please refer to clock-bindings.txt.
+- assigned-clocks
+	Should be <&classd_gclk>.
+- assigned-clock-parents
+	Should be <&audio_pll_pmc>.
 
 Optional properties:
 - pinctrl-names, pinctrl-0
@@ -43,6 +47,8 @@ classd: classd@fc048000 {
 		dma-names = "tx";
 		clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>;
 		clock-names = "pclk", "gclk", "aclk";
+		assigned-clocks = <&classd_gclk>;
+		assigned-clock-parents = <&audio_pll_pmc>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_classd_default>;
diff --git a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
new file mode 100644
index 000000000000..e0875f17c229
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
@@ -0,0 +1,55 @@
+* Atmel PDMIC driver under ALSA SoC architecture
+
+Required properties:
+- compatible
+	Should be "atmel,sama5d2-pdmic".
+- reg
+	Should contain PDMIC registers location and length.
+- interrupts
+	Should contain the IRQ line for the PDMIC.
+- dmas
+	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
+- dma-names
+	Must be "rx".
+- clock-names
+	Required elements:
+	- "pclk"	peripheral clock
+	- "gclk"	generated clock
+- clocks
+	Must contain an entry for each required entry in clock-names.
+	Please refer to clock-bindings.txt.
+- atmel,mic-min-freq
+	The minimal frequency that the micphone supports.
+- atmel,mic-max-freq
+	The maximal frequency that the micphone supports.
+
+Optional properties:
+- pinctrl-names, pinctrl-0
+	Please refer to pinctrl-bindings.txt.
+- atmel,model
+	The user-visible name of this sound card.
+	The default value is "PDMIC".
+- atmel,mic-offset
+	The offset that should be added.
+	The range is from -32768 to 32767.
+	The default value is 0.
+
+Example:
+	pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pdmic_clk>, <&pdmic_gclk>;
+				clock-names = "pclk", "gclk";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pdmic_default>;
+				atmel,model = "PDMIC @ sama5d2_xplained";
+				atmel,mic-min-freq = <1000000>;
+				atmel,mic-max-freq = <3246000>;
+				atmel,mic-offset = <0x0>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt
new file mode 100644
index 000000000000..5ca5a709b6aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/da7218.txt
@@ -0,0 +1,104 @@
+Dialog Semiconductor DA7218 Audio Codec bindings
+
+DA7218 is an audio codec with HP detect feature.
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da7217" or "dlg,da7218"
+- reg: Specifies the I2C slave address
+
+- VDD-supply: VDD power supply for the device
+- VDDMIC-supply: VDDMIC power supply for the device
+- VDDIO-supply: VDDIO power supply for the device
+  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
+   information relating to regulators)
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the IRQs from DA7218 are delivered to.
+- interrupts: IRQ line info for DA7218 chip.
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+   further information relating to interrupt properties)
+- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
+  interrupt is to be used to wake system, otherwise "irq" should be used.
+- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- dlg,micbias1-lvl-millivolt : Voltage (mV) for Mic Bias 1
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,micbias2-lvl-millivolt : Voltage (mV) for Mic Bias 2
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,mic1-amp-in-sel : Mic1 input source type
+	["diff", "se_p", "se_n"]
+- dlg,mic2-amp-in-sel : Mic2 input source type
+	["diff", "se_p", "se_n"]
+- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic1-samplephase : When to sample audio from DMIC1.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic1-clkrate-hz : DMic1 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,dmic2-data-sel : DMic2 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic2-samplephase : When to sample audio from DMic2.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic2-clkrate-hz : DMic2 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP
+			      (DA7217 only)
+
+======
+
+Optional Child node - 'da7218_hpldet' (DA7218 only):
+
+Optional properties:
+- dlg,jack-rate-us : Time between jack detect measurements (us)
+	[<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>]
+- dlg,jack-debounce : Number of debounce measurements taken for jack detect
+	[<0>, <2>, <3>, <4>]
+- dlg,jack-threshold-pct : Threshold level for jack detection (% of VDD)
+	[<84>, <88>, <92>, <96>]
+- dlg,comp-inv : Boolean flag, invert comparator output
+- dlg,hyst : Boolean flag, enable hysteresis
+- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal
+
+======
+
+Example:
+
+	codec: da7218@1a {
+		compatible = "dlg,da7218";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		wakeup-source;
+
+		VDD-supply = <&reg_audio>;
+		VDDMIC-supply = <&reg_audio>;
+		VDDIO-supply = <&reg_audio>;
+
+		clocks = <&clks 201>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl-millivolt = <2600>;
+		dlg,micbias2-lvl-millivolt = <2600>;
+		dlg,mic1-amp-in-sel = "diff";
+		dlg,mic2-amp-in-sel = "diff";
+
+		dlg,dmic1-data-sel = "lrise_rfall";
+		dlg,dmic1-samplephase = "on_clkedge";
+		dlg,dmic1-clkrate-hz = <3000000>;
+		dlg,dmic2-data-sel = "lrise_rfall";
+		dlg,dmic2-samplephase = "on_clkedge";
+		dlg,dmic2-clkrate-hz = <3000000>;
+
+		da7218_hpldet {
+			dlg,jack-rate-us = <40>;
+			dlg,jack-debounce = <2>;
+			dlg,jack-threshold-pct = <84>;
+			dlg,hyst;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
index 1b7030911a3b..cf61681826b6 100644
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ b/Documentation/devicetree/bindings/sound/da7219.txt
@@ -28,13 +28,15 @@ Optional properties:
 - clocks : phandle and clock specifier for codec MCLK.
 - clock-names : Clock name string for 'clocks' attribute, should be "mclk".
 
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
-	[<1050>, <1100>, <1200>, <1400>]
 - dlg,micbias-lvl : Voltage (mV) for Mic Bias
-	[<1800>, <2000>, <2200>, <2400>, <2600>]
+	[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
 - dlg,mic-amp-in-sel : Mic input source type
 	["diff", "se_p", "se_n"]
 
+Deprecated properties:
+- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
+  (LDO unavailable in production HW so property no longer required).
+
 ======
 
 Child node - 'da7219_aad':
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index b93362a570be..3e26a9478e57 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -25,6 +25,11 @@ Required properties:
 	"mem"		  Peripheral access clock to access registers.
 	"ipg"		  Peripheral clock to driver module.
 	"asrck_<0-f>"	  Clock sources for input and output clock.
+	"spba"		  The spba clock is required when ASRC is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
 
    - big-endian		: If this property is absent, the little endian mode
 			  will be in use as default. Otherwise, the big endian
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index d3b6b5f48010..cd3ee5d84f03 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -27,6 +27,11 @@ Required properties:
 			  derive HCK, SCK and FS.
 	"fsys"		  The system clock derived from ahb clock used to
 			  derive HCK, SCK and FS.
+	"spba"		  The spba clock is required when ESAI is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
 
   - fsl,fifo-depth	: The number of elements in the transmit and receive
 			  FIFOs. This number is the maximum allowed value for
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index b5ee32ee3706..4ca39ddc0417 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -27,6 +27,11 @@ Required properties:
 			  Transceiver Clock Diagram" of SoC reference manual.
 			  It can also be referred to TxClk_Source bit of
 			  register SPDIF_STC.
+	"spba"		  The spba clock is required when SPDIF is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
 
    - big-endian		: If this property is absent, the native endian mode
 			  will be in use as default, or the big endian mode
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-in.txt b/Documentation/devicetree/bindings/sound/img,i2s-in.txt
new file mode 100644
index 000000000000..423265cfc3d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,i2s-in.txt
@@ -0,0 +1,47 @@
+Imagination Technologies I2S Input Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,i2s-in"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Must include the following entry:
+	"sys"	The system clock
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"rx"	Single DMA channel used by all active I2S channels
+
+  - img,i2s-channels : Number of I2S channels instantiated in the I2S in block
+
+Optional Properties:
+
+  - interrupts : Contains the I2S in interrupts. Depending on
+	the configuration, there may be no interrupts, one interrupt,
+	or an interrupt per I2S channel. For the case where there is
+	one interrupt per channel, the interrupts should be listed
+	in ascending channel order
+
+  - resets: Contains a phandle to the I2S in reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Example:
+
+i2s_in: i2s-in@18100800 {
+	compatible = "img,i2s-in";
+	reg = <0x18100800 0x200>;
+	interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 30 0xffffffff 0>;
+	dma-names = "rx";
+	clocks = <&cr_periph SYS_CLK_I2S_IN>;
+	clock-names = "sys";
+	img,i2s-channels = <6>;
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-out.txt b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
new file mode 100644
index 000000000000..0159415b3338
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
@@ -0,0 +1,51 @@
+Imagination Technologies I2S Output Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,i2s-out"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Must include the following entries:
+	"sys"	The system clock
+	"ref"	The reference clock
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"tx"	Single DMA channel used by all active I2S channels
+
+  - img,i2s-channels : Number of I2S channels instantiated in the I2S out block
+
+  - resets: Contains a phandle to the I2S out reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+  - interrupts : Contains the I2S out interrupts. Depending on
+	the configuration, there may be no interrupts, one interrupt,
+	or an interrupt per I2S channel. For the case where there is
+	one interrupt per channel, the interrupts should be listed
+	in ascending channel order
+
+Example:
+
+i2s_out: i2s-out@18100A00 {
+	compatible = "img,i2s-out";
+	reg = <0x18100A00 0x200>;
+	interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 23 0xffffffff 0>;
+	dma-names = "tx";
+	clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+		 <&clk_core CLK_I2S>;
+	clock-names = "sys", "ref";
+	img,i2s-channels = <6>;
+	resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+	reset-names = "rst";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,parallel-out.txt b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
new file mode 100644
index 000000000000..a3015d2a06e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies Parallel Output Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,parallel-out".
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device.
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"tx"
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"sys"	The system clock
+	"ref"	The reference clock
+
+  - resets: Contains a phandle to the parallel out reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+  - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+parallel_out: parallel-out@18100C00 {
+	compatible = "img,parallel-out";
+	reg = <0x18100C00 0x100>;
+	interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 16 0xffffffff 0>;
+	dma-names = "tx";
+	clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+		 <&clk_core CLK_AUDIO_DAC>;
+	clock-names = "sys", "ref";
+	resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+	reset-names = "rst";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,pistachio-internal-dac.txt b/Documentation/devicetree/bindings/sound/img,pistachio-internal-dac.txt
new file mode 100644
index 000000000000..4cc18fc0477e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,pistachio-internal-dac.txt
@@ -0,0 +1,18 @@
+Pistachio internal DAC DT bindings
+
+Required properties:
+
+  - compatible: "img,pistachio-internal-dac"
+
+  - img,cr-top : Must contain a phandle to the top level control syscon
+		 node which contains the internal dac control registers
+
+  - VDD-supply : Digital power supply regulator (+1.8V or +3.3V)
+
+Examples:
+
+internal_dac: internal-dac {
+	compatible = "img,pistachio-internal-dac";
+	img,cr-top = <&cr_top>;
+	VDD-supply = <&supply3v3>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
new file mode 100644
index 000000000000..aab9a81f7e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
@@ -0,0 +1,41 @@
+Imagination Technologies SPDIF Input Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,spdif-in"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"rx"
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Includes the following entries:
+	"sys"	The system clock
+
+Optional Properties:
+
+  - resets: Should contain a phandle to the spdif in reset signal, if any
+
+  - reset-names: Should contain the reset signal name "rst", if a
+	reset phandle is given
+
+  - interrupts : Contains the spdif in interrupt, if present
+
+Example:
+
+spdif_in: spdif-in@18100E00 {
+	compatible = "img,spdif-in";
+	reg = <0x18100E00 0x100>;
+	interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 15 0xffffffff 0>;
+	dma-names = "rx";
+	clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+	clock-names = "sys";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
new file mode 100644
index 000000000000..470a5191e101
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies SPDIF Output Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,spdif-out"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"tx"
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"sys"	The system clock
+	"ref"	The reference clock
+
+  - resets: Contains a phandle to the spdif out reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+  - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+spdif_out: spdif-out@18100D00 {
+	compatible = "img,spdif-out";
+	reg = <0x18100D00 0x100>;
+	interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 14 0xffffffff 0>;
+	dma-names = "tx";
+	clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+		 <&clk_core CLK_SPDIF>;
+	clock-names = "sys", "ref";
+	resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+	reset-names = "rst";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/inno-rk3036.txt b/Documentation/devicetree/bindings/sound/inno-rk3036.txt
new file mode 100644
index 000000000000..758de8e27561
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/inno-rk3036.txt
@@ -0,0 +1,20 @@
+Inno audio codec for RK3036
+
+Inno audio codec is integrated inside RK3036 SoC.
+
+Required properties:
+- compatible : Should be "rockchip,rk3036-codec".
+- reg : The registers of codec.
+- clock-names : Should be "acodec_pclk".
+- clocks : The clock of codec.
+- rockchip,grf : The phandle of grf device node.
+
+Example:
+
+	acodec: acodec-ana@20030000 {
+		compatible = "rk3036-codec";
+		reg = <0x20030000 0x4000>;
+		rockchip,grf = <&grf>;
+		clock-names = "acodec_pclk";
+		clocks = <&cru ACLK_VCODEC>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index c57cbd65736c..8ee0fa91e4a0 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -7,8 +7,11 @@ Required properties:
 				  "renesas,rcar_sound-gen3" if generation3
 				  Examples with soctypes are:
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
+				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
 				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
+				    - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
+				    - "renesas,rcar_sound-r8a7794" (R-Car E2)
 				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
 - reg				: Should contain the register physical address.
 				  required register is
@@ -34,6 +37,8 @@ Required properties:
 				  see below for detail.
 - #sound-dai-cells		: it must be 0 if your system is using single DAI
 				  it must be 1 if your system is using multi  DAI
+
+Optional properties:
 - #clock-cells			: it must be 0 if your system has audio_clkout
 				  it must be 1 if your system has audio_clkout0/1/2/3
 - clock-frequency		: for all audio_clkout0/1/2/3
@@ -244,3 +249,80 @@ rcar_sound: sound@ec500000 {
 		};
 	};
 };
+
+Example: simple sound card
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+Example: simple sound card for TDM
+
+	rsnd_tdm: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+			dai-tdm-slot-num = <6>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&xxx>;
+		};
+	};
+
+Example: simple sound card for Multi channel
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
index 962748a8d919..2b2caa281ce3 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
@@ -4,8 +4,8 @@ Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC
 
 Required properties:
 
-- compatible				: "renesas,rsrc-card,<board>"
-					  Examples with soctypes are:
+- compatible				: "renesas,rsrc-card{,<board>}"
+					  Examples with boards are:
 					    - "renesas,rsrc-card"
 					    - "renesas,rsrc-card,lager"
 					    - "renesas,rsrc-card,koelsch"
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 2267d249ca0e..b7f3a9325ebd 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -19,6 +19,7 @@ Required properties:
 - clock-names: should contain followings:
    - "i2s_hclk": clock for I2S BUS
    - "i2s_clk" : clock for I2S controller
+- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
 - rockchip,capture-channels: max capture channels, if not set, 2 channels default.
 
 Example for rk3288 I2S controller:
@@ -31,5 +32,6 @@ i2s@ff890000 {
 	dma-names = "tx", "rx";
 	clock-names = "i2s_hclk", "i2s_clk";
 	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+	rockchip,playback-channels = <8>;
 	rockchip,capture-channels = <2>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5616.txt b/Documentation/devicetree/bindings/sound/rt5616.txt
new file mode 100644
index 000000000000..efc48c65198d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5616.txt
@@ -0,0 +1,26 @@
+RT5616 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5616".
+
+- reg : The I2C address of the device.
+
+Pins on the device (for linking into audio routes) for RT5616:
+
+  * IN1P
+  * IN2P
+  * IN2N
+  * LOUTL
+  * LOUTR
+  * HPOL
+  * HPOR
+
+Example:
+
+codec: rt5616@1b {
+	compatible = "realtek,rt5616";
+	reg = <0x1b>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
new file mode 100644
index 000000000000..5f79e7fde032
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -0,0 +1,75 @@
+RT5659/RT5658 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5659" or "realtek,rt5658".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN2N pin as dmic1 data pin
+  2: using GPIO5 pin as dmic1 data pin
+  3: using GPIO9 pin as dmic1 data pin
+  4: using GPIO11 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN2P pin as dmic2 data pin
+  2: using GPIO6 pin as dmic2 data pin
+  3: using GPIO10 pin as dmic2 data pin
+  4: using GPIO12 pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD3 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * SPOL
+  * SPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+  * SPDIF
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5659";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index f07078997f87..1b3c13d206ff 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -18,7 +18,7 @@ Required properties:
 Optional properties:
 
 - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
-- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
 
 - realtek,in1-differential
 - realtek,in2-differential
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index c92966bd5488..0dce690f78f5 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,6 +14,9 @@ Required properties:
    - "apb": the parent APB clock for this controller
    - "codec": the parent module clock
 
+Optional properties:
+- allwinner,pa-gpios: gpio to enable external amplifier
+
 Example:
 codec: codec@01c22c00 {
 	#sound-dai-cells = <0>;
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
new file mode 100644
index 000000000000..5d9cb84c661d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt
@@ -0,0 +1,48 @@
+Texas Instruments pcm3168a DT bindings
+
+This driver supports both SPI and I2C bus access for this codec
+
+Required properties:
+
+  - compatible: "ti,pcm3168a"
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Includes the following entries:
+	"scki"	The system clock
+
+  - VDD1-supply : Digital power supply regulator 1 (+3.3V)
+
+  - VDD2-supply : Digital power supply regulator 2 (+3.3V)
+
+  - VCCAD1-supply : ADC power supply regulator 1 (+5V)
+
+  - VCCAD2-supply : ADC power supply regulator 2 (+5V)
+
+  - VCCDA1-supply : DAC power supply regulator 1 (+5V)
+
+  - VCCDA2-supply : DAC power supply regulator 2 (+5V)
+
+For required properties on SPI/I2C, consult SPI/I2C device tree documentation
+
+Examples:
+
+i2c0: i2c0@0 {
+
+	...
+
+	pcm3168a: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+		clocks = <&clk_core CLK_AUDIO>;
+		clock-names = "scki";
+		VDD1-supply = <&supply3v3>;
+		VDD2-supply = <&supply3v3>;
+		VCCAD1-supply = <&supply5v0>;
+		VCCAD2-supply = <&supply5v0>;
+		VCCDA1-supply = <&supply5v0>;
+		VCCDA2-supply = <&supply5v0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dac_clk_pin>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.txt b/Documentation/devicetree/bindings/sound/wlf,wm8974.txt
new file mode 100644
index 000000000000..01d3a7c83419
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8974.txt
@@ -0,0 +1,15 @@
+WM8974 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+  - compatible: "wlf,wm8974"
+  - reg: the I2C address or SPI chip select number of the device
+
+Examples:
+
+codec: wm8974@1a {
+	compatible = "wlf,wm8974";
+	reg = <0x1a>;
+};
diff --git a/Documentation/sound/alsa/img,spdif-in.txt b/Documentation/sound/alsa/img,spdif-in.txt
new file mode 100644
index 000000000000..8b7505785fa6
--- /dev/null
+++ b/Documentation/sound/alsa/img,spdif-in.txt
@@ -0,0 +1,49 @@
+The Imagination Technologies SPDIF Input controller contains the following
+controls:
+
+name='IEC958 Capture Mask',index=0
+
+This control returns a mask that shows which of the IEC958 status bits
+can be read using the 'IEC958 Capture Default' control.
+
+name='IEC958 Capture Default',index=0
+
+This control returns the status bits contained within the SPDIF stream that
+is being received. The 'IEC958 Capture Mask' shows which bits can be read
+from this control.
+
+name='SPDIF In Multi Frequency Acquire',index=0
+name='SPDIF In Multi Frequency Acquire',index=1
+name='SPDIF In Multi Frequency Acquire',index=2
+name='SPDIF In Multi Frequency Acquire',index=3
+
+This control is used to attempt acquisition of up to four different sample
+rates. The active rate can be obtained by reading the 'SPDIF In Lock Frequency'
+control.
+
+When the value of this control is set to {0,0,0,0}, the rate given to hw_params
+will determine the single rate the block will capture. Else, the rate given to
+hw_params will be ignored, and the block will attempt capture for each of the
+four sample rates set here.
+
+If less than four rates are required, the same rate can be specified more than
+once
+
+name='SPDIF In Lock Frequency',index=0
+
+This control returns the active capture rate, or 0 if a lock has not been
+acquired
+
+name='SPDIF In Lock TRK',index=0
+
+This control is used to modify the locking/jitter rejection characteristics
+of the block. Larger values increase the locking range, but reduce jitter
+rejection.
+
+name='SPDIF In Lock Acquire Threshold',index=0
+
+This control is used to change the threshold at which a lock is acquired.
+
+name='SPDIF In Lock Release Threshold',index=0
+
+This control is used to change the threshold at which a lock is released.