summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-13 10:39:26 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-13 10:39:26 -0800
commitdb5b0ae00712b5176d7405e7a1dd2bfd6e8f5070 (patch)
tree4e874d81ca9037dda1007178bbc9613649d43305 /Documentation
parent6be35c700f742e911ecedd07fcc43d4439922334 (diff)
parent64507dd7028e3e0145077e73b8374bd75aea117c (diff)
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/exynos/power_domain.txt15
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt4
-rw-r--r--Documentation/devicetree/bindings/ata/exynos-sata-phy.txt14
-rw-r--r--Documentation/devicetree/bindings/ata/exynos-sata.txt17
-rw-r--r--Documentation/devicetree/bindings/clock/imx25-clock.txt162
-rw-r--r--Documentation/devicetree/bindings/clock/zynq-7000.txt55
-rw-r--r--Documentation/devicetree/bindings/drm/exynos/hdmi.txt22
-rw-r--r--Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt12
-rw-r--r--Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt12
-rw-r--r--Documentation/devicetree/bindings/drm/exynos/mixer.txt15
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-poweroff.txt22
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/bu21013.txt28
-rw-r--r--Documentation/devicetree/bindings/media/s5p-mfc.txt23
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt39
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-orion.txt15
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-wdt.txt15
17 files changed, 467 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 6528e215c5fe..5216b419016a 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -4,14 +4,13 @@ Exynos processors include support for multiple power domains which are used
to gate power to one or more peripherals on the processor.
Required Properties:
-- compatiable: should be one of the following.
+- compatible: should be one of the following.
* samsung,exynos4210-pd - for exynos4210 type power domain.
- reg: physical base address of the controller and length of memory mapped
region.
-Optional Properties:
-- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off
- state during boot and remains to be turned-off until explicitly turned-on.
+Node of a device using power domains must have a samsung,power-domain property
+defined with a phandle to respective power domain.
Example:
@@ -19,3 +18,11 @@ Example:
compatible = "samsung,exynos4210-pd";
reg = <0x10023C00 0x10>;
};
+
+Example of the node using power domain:
+
+ node {
+ /* ... */
+ samsung,power-domain = <&lcd0>;
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index ac9e7516756e..f79818711e83 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -41,6 +41,10 @@ i.MX6 Quad SABRE Smart Device Board
Required root node properties:
- compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
Generic i.MX boards
-------------------
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
new file mode 100644
index 000000000000..37824fac688e
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
@@ -0,0 +1,14 @@
+* Samsung SATA PHY Controller
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "samsung,exynos5-sata-phy"
+- reg : <registers mapping>
+
+Example:
+ sata@ffe07000 {
+ compatible = "samsung,exynos5-sata-phy";
+ reg = <0xffe07000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
new file mode 100644
index 000000000000..0849f1025e34
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
@@ -0,0 +1,17 @@
+* Samsung AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "samsung,exynos5-sata"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+- samsung,sata-freq : <frequency in MHz>
+
+Example:
+ sata@ffe08000 {
+ compatible = "samsung,exynos5-sata";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
new file mode 100644
index 000000000000..c2a3525ecb4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -0,0 +1,162 @@
+* Clock bindings for Freescale i.MX25
+
+Required properties:
+- compatible: Should be "fsl,imx25-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX25
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+
+Examples:
+
+clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
new file mode 100644
index 000000000000..23ae1db1bc13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -0,0 +1,55 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== PLLs ==
+
+Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
+
+Required properties:
+- #clock-cells : shall be 0 (only one clock is output from this node)
+- compatible : "xlnx,zynq-pll"
+- reg : pair of u32 values, which are the address offsets within the SLCR
+ of the relevant PLL_CTRL register and PLL_CFG register respectively
+- clocks : phandle for parent clock. should be the phandle for ps_clk
+
+Optional properties:
+- clock-output-names : name of the output clock
+
+Example:
+ armpll: armpll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x100 0x110>;
+ clock-output-names = "armpll";
+ };
+
+== Peripheral clocks ==
+
+Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
+
+Required properties:
+- #clock-cells : shall be 1
+- compatible : "xlnx,zynq-periph-clock"
+- reg : a single u32 value, describing the offset within the SLCR where
+ the CLK_CTRL register is found for this peripheral
+- clocks : phandle for parent clocks. should hold phandles for
+ the IO_PLL, ARM_PLL, and DDR_PLL in order
+- clock-output-names : names of the output clock(s). For peripherals that have
+ two output clocks (for example, the UART), two clocks
+ should be listed.
+
+Example:
+ uart_clk: uart_clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynq-periph-clock";
+ clocks = <&iopll &armpll &ddrpll>;
+ reg = <0x154>;
+ clock-output-names = "uart0_ref_clk",
+ "uart1_ref_clk";
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
new file mode 100644
index 000000000000..589edee37394
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
@@ -0,0 +1,22 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmi".
+- reg: physical base address of the hdmi and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+ a) phandle of the gpio controller node.
+ b) pin number within the gpio controller.
+ c) pin function mode.
+ d) optional flags and pull up/down.
+ e) drive strength.
+
+Example:
+
+ hdmi {
+ compatible = "samsung,exynos5-hdmi";
+ reg = <0x14530000 0x100000>;
+ interrupts = <0 95 0>;
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
new file mode 100644
index 000000000000..fa166d945809
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiddc".
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+ hdmiddc {
+ compatible = "samsung,exynos5-hdmiddc";
+ reg = <0x50>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
new file mode 100644
index 000000000000..858f4f9b902f
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+ hdmiphy {
+ compatible = "samsung,exynos5-hdmiphy";
+ reg = <0x38>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
new file mode 100644
index 000000000000..9b2ea0343566
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
@@ -0,0 +1,15 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-mixer".
+- reg: physical base address of the mixer and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+
+Example:
+
+ mixer {
+ compatible = "samsung,exynos5-mixer";
+ reg = <0x14450000 0x10000>;
+ interrupts = <0 94 0>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
new file mode 100644
index 000000000000..558cdf3c9abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -0,0 +1,22 @@
+GPIO line that should be set high/low to power off a device
+
+Required properties:
+- compatible : should be "gpio-poweroff".
+- gpios : The GPIO to set high/low, see "gpios property" in
+ Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
+ low to power down the board set it to "Active Low", otherwise set
+ gpio to "Active High".
+
+Optional properties:
+- input : Initially configure the GPIO line as an input. Only reconfigure
+ it to an output when the pm_power_off function is called. If this optional
+ property is not specified, the GPIO is initialized as an output in its
+ inactive state.
+
+
+Examples:
+
+gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 000000000000..ca5a2c86480c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,28 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible : "rohm,bu21013_tp"
+ - reg : I2C device address
+
+Optional properties:
+ - touch-gpio : GPIO pin registering a touch event
+ - <supply_name>-supply : Phandle to a regulator supply
+ - rohm,touch-max-x : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x : Flip touch coordinates on the X axis
+ - rohm,flip-y : Flip touch coordinates on the Y axis
+
+Example:
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ compatible = "rohm,bu21013_tp";
+ reg = <0x5c>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
new file mode 100644
index 000000000000..67ec3d4ccc7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -0,0 +1,23 @@
+* Samsung Multi Format Codec (MFC)
+
+Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+supports high resolution decoding and encoding functionalities.
+The MFC device driver is a v4l2 driver which can encode/decode
+video raw/elementary streams and has support for all popular
+video codecs.
+
+Required properties:
+ - compatible : value should be either one among the following
+ (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
+ (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
+
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+
+ - interrupts : MFC interrupt number to the CPU.
+
+ - samsung,mfc-r : Base address of the first memory bank used by MFC
+ for DMA contiguous memory allocation and its size.
+
+ - samsung,mfc-l : Base address of the second memory bank used by MFC
+ for DMA contiguous memory allocation and its size.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
index 361bccb7ec89..95daf6335c37 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -7,8 +7,10 @@ Required properties:
- compatible: "marvell,88f6180-pinctrl",
"marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
"marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+ "marvell,98dx4122-pinctrl"
This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs.
Available mpp pins/groups and functions:
Note: brackets (x) are not part of the mpp name for marvell,function and given
@@ -277,3 +279,40 @@ mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync)
mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync)
mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16)
mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
+
+* Marvell Bobcat 98dx4122
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd)
+mpp5 5 gpo, nand(io7), uart0(txd)
+mpp6 6 sysrst(out), spi(mosi)
+mpp7 7 gpo, pex(rsto), spi(cs)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts)
+mpp10 10 gpo, spi(sck), uart0(txd)
+mpp11 11 gpio, spi(miso), uart0(rxd)
+mpp13 13 gpio, uart1(txd)
+mpp14 14 gpio, uart1(rxd)
+mpp15 15 gpio, uart0(rts)
+mpp16 16 gpio, uart0(cts)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp34 34 gpio
+mpp35 35 gpio
+mpp36 36 gpio
+mpp37 37 gpio
+mpp38 38 gpio
+mpp39 39 gpio
+mpp40 40 gpio
+mpp41 41 gpio
+mpp42 42 gpio
+mpp43 43 gpio
+mpp44 44 gpio
+mpp45 45 gpio
+mpp49 49 gpio
+
diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt
new file mode 100644
index 000000000000..6bc09ec14c4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt
@@ -0,0 +1,15 @@
+* EHCI controller, Orion Marvell variants
+
+Required properties:
+- compatible: must be "marvell,orion-ehci"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The EHCI interrupt
+
+Example:
+
+ ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 770a0193ca1b..902b1b1f568e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -55,4 +55,5 @@ ti Texas Instruments
via VIA Technologies, Inc.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
+winbond Winbond Electronics corp.
xlnx Xilinx
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
new file mode 100644
index 000000000000..2957ebb5aa71
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -0,0 +1,15 @@
+* Atmel Watchdog Timers
+
+** at91sam9-wdt
+
+Required properties:
+- compatible: must be "atmel,at91sam9260-wdt".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+Example:
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ };