Merge tag 'extcon-next-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 4.5

Detailed description for patchset:
1. Add new MAX3355 extcon driver
- Maxim Integrated MAX3355E chip integrates a charge pump
  and comparator to enable a system with an integrated
  USB OTG dual-role transceiver to function as an USB OTG
  dual-role device.

2. Update the extcon-arizona driver for jack detection
- Add the device binding for the jack detection and add
  the documentation of extcon-arizona.c.

3. Fix the minor issue of extcon driver
- Add IRQF_ONESHOT to interrupt flags of extcon-rt8973.
- Fix the return value regmap_irq_get_virq() of
  extcon-max(14577|77693|77843).c driver by using script[1].
  [1] http://permalink.gmane.org/gmane.linux.kernel/2046107

2 files changed, 81 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
index e1705fae63a8..e27341f8a4c7 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
@@ -13,3 +13,63 @@ Optional properties:
     ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
     If this node is not mentioned or if the value is unknown, then
     headphone detection mode is set to HPDETL.
+
+  - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
+    detection.
+  - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
+    jack detection.
+  - wlf,jd-invert : Invert the polarity of the jack detection switch
+
+  - wlf,micd-software-compare : Use a software comparison to determine mic
+    presence
+  - wlf,micd-detect-debounce : Additional software microphone detection
+    debounce specified in milliseconds.
+  - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
+    polarity if one exists.
+  - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
+    performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
+    defines.
+  - wlf,micd-rate : Delay between successive microphone detection measurements,
+    specified as per the ARIZONA_MICD_TIME_XXX defines.
+  - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
+    number of measurements to take, valid values being 2 and 4.
+  - wlf,micd-timeout-ms : Timeout for microphone detection, specified in
+    milliseconds.
+  - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
+    detection.
+  - wlf,micd-configs : Headset polarity configurations (generally used for
+    detection of CTIA / OMTP headsets), the field can be of variable length
+    but should always be a multiple of 3 cells long, each three cell group
+    represents one polarity configuration.
+    The first cell defines the accessory detection pin, zero will use MICDET1
+    and all other values will use MICDET2.
+    The second cell represents the MICBIAS to be used.
+    The third cell represents the value of the micd-pol-gpio pin.
+
+  - wlf,gpsw : Settings for the general purpose switch
+
+Example:
+
+codec: wm8280@0 {
+	compatible = "wlf,wm8280";
+	reg = <0>;
+	...
+
+	wlf,use-jd2;
+	wlf,use-jd2-nopull;
+	wlf,jd-invert;
+
+	wlf,micd-software-compare;
+	wlf,micd-detect-debounce = <0>;
+	wlf,micd-pol-gpio = <&codec 2 0>;
+	wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
+	wlf,micd-dbtime = <4>;
+	wlf,micd-timeout-ms = <100>;
+	wlf,micd-force-micbias;
+	wlf,micd-configs = <
+		0 1 0 /* MICDET1 MICBIAS1 GPIO=low */
+		1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
+	>;
+
+	wlf,gpsw = <0>;
+};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-max3355.txt b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt
new file mode 100644
index 000000000000..f2288ea9eb82
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt
@@ -0,0 +1,21 @@
+Maxim Integrated MAX3355 USB OTG chip
+-------------------------------------
+
+MAX3355 integrates a charge pump and comparators to enable a system with an
+integrated USB OTG dual-role transceiver to function as a USB OTG dual-role
+device.
+
+Required properties:
+- compatible: should be "maxim,max3355";
+- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin
+		    connected to the MAX3355's SHDN# pin;
+- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin
+	    connected to the MAX3355's ID_OUT pin.
+
+Example:
+
+	usb-otg {
+		compatible = "maxim,max3355";
+		maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	};