Merge tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add upper and lower limits clamps for the cooling device state in the
   power allocator governor (Michael Kao)

 - Add upper and lower limits support for the power allocator governor
   (Lukasz Luba)

 - Optimize conditions testing for the trip points (Bernard Zhao)

 - Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver
   (Tian Tao)

 - Add MT8516 dt-bindings and device reset optional support (Fabien
   Parent)

 - Add a quiescent period to cool down the PCH when entering S0iX
   (Sumeet Pawnikar)

 - Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao
   Li)

 - Remove useless NULL check in the hwmon driver (Bernard Zhao)

 - Update the current state in the cpufreq cooling device only if the
   frequency change is effective (Zhuguangqing)

 - Improve the schema validation for the rcar DT bindings (Geert
   Uytterhoeven)

 - Fix the user time unit in the documentation (Viresh Kumar)

 - Add PCI ids for Lewisburg PCH (Andres Freund)

 - Add hwmon support on amlogic (Martin Blumenstingl)

 - Fix build failure for PCH entering on in S0iX (Randy Dunlap)

 - Improve the k_* coefficient for the power allocator governor (Lukasz
   Luba)

 - Fix missing const on a sysfs attribute (Rikard Falkeborn)

 - Remove broken interrupt support on rcar to be replaced by a new one
   (Niklas Söderlund)

 - Improve the error code handling at init time on imx8mm (Fabio
   Estevam)

 - Compute interval validity once instead at each temperature reading
   iteration on acerhdf (Daniel Lezcano)

 - Add r8a779a0 support (Niklas Söderlund)

 - Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas
   Pandruvada)

 - Add RFIM and mailbox support on int340x (Srinivas Pandruvada)

 - Use macro for temperature calculation on PCH (Sumeet Pawnikar)

 - Simplify return conditions at probe time on Broadcom (Zheng Yongjun)

 - Fix workload name on PCH (Srinivas Pandruvada)

 - Migrate the devfreq cooling device code to the energy model API
   (Lukasz Luba)

 - Emit a warning if the thermal_zone_device_update is called without
   the .get_temp() ops (Daniel Lezcano)

 - Add critical and hot ops for the thermal zone (Daniel Lezcano)

 - Remove notification usage when critical is reached on rcar (Daniel
   Lezcano)

 - Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba)

* tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
  thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
  thermal/drivers/rcar: Remove notification usage
  thermal/core: Add critical and hot ops
  thermal/core: Emit a warning if the thermal zone is updated without ops
  drm/panfrost: Register devfreq cooling and attempt to add Energy Model
  thermal: devfreq_cooling: remove old power model and use EM
  thermal: devfreq_cooling: add new registration functions with Energy Model
  thermal: devfreq_cooling: use a copy of device status
  thermal: devfreq_cooling: change tracing function and arguments
  thermal: int340x: processor_thermal: Correct workload type name
  thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
  thermal: intel: pch: use macro for temperature calculation
  thermal: int340x: processor_thermal: Add mailbox driver
  thermal: int340x: processor_thermal: Add RFIM driver
  thermal: int340x: processor_thermal: Add AlderLake PCI device id
  thermal: int340x: processor_thermal: Refactor MMIO interface
  thermal: rcar_gen3_thermal: Add r8a779a0 support
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
  platform/x86/drivers/acerhdf: Check the interval value when it is set
  platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
  ...

4 files changed, 47 insertions, 24 deletions

diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 1e249c42fae0..5c7e7bdd029a 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -14,18 +14,19 @@ Required properties:
   - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
   - "mediatek,mt7622-thermal" : For MT7622 SoC
   - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
+  - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
 - reg: Address range of the thermal controller
 - interrupts: IRQ for the thermal controller
 - clocks, clock-names: Clocks needed for the thermal controller. required
                        clocks are:
 		       "therm":	 Main clock needed for register access
 		       "auxadc": The AUXADC clock
-- resets: Reference to the reset controller controlling the thermal controller.
 - mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
 - mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
 - #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Optional properties:
+- resets: Reference to the reset controller controlling the thermal controller.
 - nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
                unspecified default values shall be used.
 - nvmem-cell-names: Should be "calibration-data"
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index f386f2a7c06c..b33a76eeac4e 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -26,13 +26,16 @@ properties:
       - renesas,r8a77961-thermal # R-Car M3-W+
       - renesas,r8a77965-thermal # R-Car M3-N
       - renesas,r8a77980-thermal # R-Car V3H
+      - renesas,r8a779a0-thermal # R-Car V3U
+
   reg:
     minItems: 2
-    maxItems: 3
+    maxItems: 4
     items:
       - description: TSC1 registers
       - description: TSC2 registers
       - description: TSC3 registers
+      - description: TSC4 registers
 
   interrupts:
     items:
@@ -55,12 +58,22 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
   - clocks
   - power-domains
   - resets
   - "#thermal-sensor-cells"
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,r8a779a0-thermal
+then:
+  required:
+    - interrupts
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index 7e9557ac0e4a..927de79ab4b5 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -62,25 +62,35 @@ properties:
   "#thermal-sensor-cells":
     const: 0
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,thermal-r8a73a4 # R-Mobile APE6
-          - renesas,thermal-r8a7779 # R-Car H1
-then:
-  required:
-    - compatible
-    - reg
-else:
-  required:
-    - compatible
-    - reg
-    - interrupts
-    - clocks
-    - power-domains
-    - resets
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,thermal-r8a73a4 # R-Mobile APE6
+                - renesas,thermal-r8a7779 # R-Car H1
+    then:
+      required:
+        - resets
+        - '#thermal-sensor-cells'
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,thermal-r8a7779 # R-Car H1
+    then:
+      required:
+        - interrupts
+        - clocks
+        - power-domains
 
 additionalProperties: false
 
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index b40b1f839148..e7520cb439ac 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -654,8 +654,7 @@ stats/time_in_state_ms:
 	The amount of time spent by the cooling device in various cooling
 	states. The output will have "<state> <time>" pair in each line, which
 	will mean this cooling device spent <time> msec of time at <state>.
-	Output will have one line for each of the supported states.  usertime
-	units here is 10mS (similar to other time exported in /proc).
+	Output will have one line for each of the supported states.
 	RO, Required