Merge branch 'tegra/dma-reset-rework' into next/dt

Bringing in the tegra dma/reset framework cleanup as a base for the DT changes.

* tegra/dma-reset-rework: (320 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

42 files changed, 555 insertions, 104 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
index 1a5a42ce21bb..83f405bde138 100644
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 343781b9f246..3e1e498fea96 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 47ada1dff216..5d49f2b37f68 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 1608a54e90e1..68ac65f82a1c 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -9,6 +9,7 @@ Required properties:
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
   "pclk" (The Tegra clock of that name),
   "clk32k_in" (The 32KHz clock input to Tegra).
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
index c6bf8a6c8f52..a2ac2d9ac71a 100644
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 24765c146e31..46f5c791ea0d 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index 32aa34ecad36..458f34789e5d 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 4499e9966bc9..9955dc9c7d96 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
index 0c80c2677104..9acea9d93160 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra114-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
new file mode 100644
index 000000000000..ded5d6212c84
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -0,0 +1,63 @@
+NVIDIA Tegra124 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra124-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <112400000>;
+		};
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k> <&osc>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
index fcfed5bf73fb..6c5901b503d0 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra20-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
index 0f714081e986..63618cde12df 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra30-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
index 90fa7da525b8..c6908e7c42cc 100644
--- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -5,6 +5,16 @@ Required properties:
 - reg: Should contain DMA registers location and length. This shuld include
   all of the per-channel registers.
 - interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+  client nodes' dmas properties. The specifier represents the DMA request
+  select value for the peripheral. For more details, consult the Tegra TRM's
+  documentation of the APB DMA channel control register REQ_SEL field.
 
 Examples:
 
@@ -27,4 +37,8 @@ apbdma: dma@6000a000 {
 		       0 149 0x04
 		       0 150 0x04
 		       0 151 0x04 >;
+	clocks = <&tegra_car 34>;
+	resets = <&tegra_car 34>;
+	reset-names = "dma";
+	#dma-cells = <1>;
 };
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
index b0019eb5330e..798cfc9d3839 100644
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index b4fa934ae3a2..ab45c02aa658 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -9,6 +9,12 @@ Required properties:
 - #size-cells: The number of cells used to represent the size of an address
   range in the host1x address space. Should be 1.
 - ranges: The mapping of the host1x address space to the CPU address space.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - host1x
 
 The host1x top-level node defines a number of children, each representing one
 of the following host1x client modules:
@@ -19,6 +25,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-mpe"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - mpe
 
 - vi: video input
 
@@ -26,6 +38,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-vi"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - vi
 
 - epp: encoder pre-processor
 
@@ -33,6 +51,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-epp"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - epp
 
 - isp: image signal processor
 
@@ -40,6 +64,12 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-isp"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - isp
 
 - gr2d: 2D graphics engine
 
@@ -47,12 +77,30 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-gr2d"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 2d
 
 - gr3d: 3D graphics engine
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-gr3d"
   - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    (This property may be omitted if the only clock in the list is "3d")
+    - 3d
+      This MUST be the first entry.
+    - 3d2 (Only required on SoCs with two 3D clocks)
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 3d
+    - 3d2 (Only required on SoCs with two 3D clocks)
 
 - dc: display controller
 
@@ -60,6 +108,16 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-dc"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dc
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dc
 
   Each display controller node has a child node, named "rgb", that represents
   the RGB output associated with the controller. It can take the following
@@ -76,6 +134,16 @@ of the following host1x client modules:
   - interrupts: The interrupt outputs from the controller.
   - vdd-supply: regulator for supply voltage
   - pll-supply: regulator for PLL
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - hdmi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - hdmi
 
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
@@ -88,12 +156,24 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-tvo"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
 
 - dsi: display serial interface
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-dsi"
   - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dsi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dsi
 
 Example:
 
@@ -105,6 +185,9 @@ Example:
 		reg = <0x50000000 0x00024000>;
 		interrupts = <0 65 0x04   /* mpcore syncpt */
 			      0 67 0x04>; /* mpcore general */
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -115,41 +198,64 @@ Example:
 			compatible = "nvidia,tegra20-mpe";
 			reg = <0x54040000 0x00040000>;
 			interrupts = <0 68 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
 		};
 
 		vi {
 			compatible = "nvidia,tegra20-vi";
 			reg = <0x54080000 0x00040000>;
 			interrupts = <0 69 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 100>;
+			reset-names = "vi";
 		};
 
 		epp {
 			compatible = "nvidia,tegra20-epp";
 			reg = <0x540c0000 0x00040000>;
 			interrupts = <0 70 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
 		};
 
 		isp {
 			compatible = "nvidia,tegra20-isp";
 			reg = <0x54100000 0x00040000>;
 			interrupts = <0 71 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
 		};
 
 		gr2d {
 			compatible = "nvidia,tegra20-gr2d";
 			reg = <0x54140000 0x00040000>;
 			interrupts = <0 72 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
 		};
 
 		gr3d {
 			compatible = "nvidia,tegra20-gr3d";
 			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
 		};
 
 		dc@54200000 {
 			compatible = "nvidia,tegra20-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <0 73 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "disp1", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
 
 			rgb {
 				status = "disabled";
@@ -160,6 +266,11 @@ Example:
 			compatible = "nvidia,tegra20-dc";
 			reg = <0x54240000 0x00040000>;
 			interrupts = <0 74 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "disp2", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
 
 			rgb {
 				status = "disabled";
@@ -170,6 +281,11 @@ Example:
 			compatible = "nvidia,tegra20-hdmi";
 			reg = <0x54280000 0x00040000>;
 			interrupts = <0 75 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
 			status = "disabled";
 		};
 
@@ -177,12 +293,18 @@ Example:
 			compatible = "nvidia,tegra20-tvo";
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <0 76 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
 			status = "disabled";
 		};
 
 		dsi {
 			compatible = "nvidia,tegra20-dsi";
 			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
 			status = "disabled";
 		};
 	};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index ef77cc7a0e46..87507e9ce6db 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -39,12 +39,23 @@ Required properties:
 - interrupts: Should contain I2C controller interrupts.
 - address-cells: Address cells for I2C device address.
 - size-cells: Size of the I2C device address.
-- clocks: Clock ID as per
-		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
-	for I2C controller.
-- clock-names: Name of the clock:
-	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
-	Tegra114 I2C controller: "div-clk".
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  Tegra20/Tegra30:
+  - div-clk
+  - fast-clk
+  Tegra114:
+  - div-clk
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - i2c
+- dmas: Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+  - rx
+  - tx
 
 Example:
 
@@ -56,5 +67,9 @@ Example:
 		#size-cells = <0>;
 		clocks = <&tegra_car 12>, <&tegra_car 124>;
 		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 2995fae7ee47..0382b8bd69c6 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -13,6 +13,12 @@ Required properties:
   array of pin numbers which is used as column.
 - linux,keymap: The keymap for keys as described in the binding document
   devicetree/bindings/input/matrix-keymap.txt.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - kbc
 
 Optional properties, in addition to those specified by the shared
 matrix-keyboard bindings:
@@ -31,6 +37,9 @@ keyboard: keyboard {
 	compatible = "nvidia,tegra20-kbc";
 	reg = <0x7000e200 0x100>;
 	interrupts = <0 85 0x04>;
+	clocks = <&tegra_car 36>;
+	resets = <&tegra_car 36>;
+	reset-names = "kbc";
 	nvidia,ghost-filter;
 	nvidia,debounce-delay-ms = <640>;
 	nvidia,kbc-row-pins = <0 1 2>;    /* pin 0, 1, 2 as rows */
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index c6d7b11db9eb..f357c16ea815 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -8,6 +8,12 @@ by mmc.txt and the properties used by the sdhci-tegra driver.
 
 Required properties:
 - compatible : Should be "nvidia,<chip>-sdhci"
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - sdhci
 
 Optional properties:
 - power-gpios : Specify GPIOs for power control
@@ -18,6 +24,9 @@ sdhci@c8000200 {
 	compatible = "nvidia,tegra20-sdhci";
 	reg = <0xc8000200 0x200>;
 	interrupts = <47>;
+	clocks = <&tegra_car 14>;
+	resets = <&tegra_car 14>;
+	reset-names = "sdhci";
 	cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 	wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 	power-gpios = <&gpio 155 0>; /* gpio PT3 */
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index d53639221403..845ff848d895 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,7 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
 
 Example:
 
@@ -25,4 +26,5 @@ ethernet@83fec000 {
 	phy-mode = "mii";
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
+	phy-supply = <&reg_fec_supply>;
 };
diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
index 5aeee53ff9f4..5ae601e7f51f 100644
--- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
+++ b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
@@ -7,3 +7,15 @@ Required properties:
 - clock-frequency : the frequency of the i2c bus
 - gpios : the gpio used for ec request
 - slave-addr: the i2c address of the slave controller
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  Tegra20/Tegra30:
+  - div-clk
+  - fast-clk
+  Tegra114:
+  - div-clk
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2c
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 6b7510775c50..24cee06915c9 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -42,14 +42,19 @@ Required properties:
     - 0xc2000000: prefetchable memory region
   Please refer to the standard PCI bus binding document for a more detailed
   explanation.
-- clocks: List of clock inputs of the controller. Must contain an entry for
-  each entry in the clock-names property.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
-  "pex": The Tegra clock of that name
-  "afi": The Tegra clock of that name
-  "pcie_xclk": The Tegra clock of that name
-  "pll_e": The Tegra clock of that name
-  "cml": The Tegra clock of that name (not required for Tegra20)
+  - pex
+  - afi
+  - pll_e
+  - cml (not required for Tegra20)
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pex
+  - afi
+  - pcie_x
 
 Root ports are defined as subnodes of the PCIe controller node.
 
@@ -91,9 +96,10 @@ SoC DTSI:
 			  0x82000000 0 0xa0000000 0xa0000000 0 0x10000000   /* non-prefetchable memory */
 			  0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
 
-		clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
-			 <&tegra_car 118>;
-		clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+		clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
 		pci@1,0 {
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index c3fc57af8772..c7ea9d4a988b 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -7,6 +7,12 @@ Required properties:
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2. See pwm.txt in this directory for a description of
   the cells format.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pwm
 
 Example:
 
@@ -14,4 +20,7 @@ Example:
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
+		clocks = <&tegra_car 17>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
 	};
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
index 93f45e9dce7c..652d1ff2e8be 100644
--- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
@@ -9,6 +9,8 @@ Required properties:
 - compatible : should be "nvidia,tegra20-rtc".
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A single interrupt specifier.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -16,4 +18,5 @@ timer {
 	compatible = "nvidia,tegra20-rtc";
 	reg = <0x7000e000 0x100>;
 	interrupts = <0 2 0x04>;
+	clocks = <&tegra_car 4>;
 };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index 392a4493eebd..845850caf088 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this UART controller.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - serial
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Optional properties:
 - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
@@ -18,7 +27,11 @@ serial@70006000 {
 	reg = <0x70006000 0x40>;
 	reg-shift = <2>;
 	interrupts = <0 36 0x04>;
-	nvidia,dma-request-selector = <&apbdma 8>;
 	nvidia,enable-modem-interrupt;
+	clocks = <&tegra_car 6>;
+	resets = <&tegra_car 6>;
+	reset-names = "serial";
+	dmas = <&apbdma 8>, <&apbdma 8>;
+	dma-names = "rx", "tx";
 	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index 8b8903ef0800..57f40f93453e 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-alc5632"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
index dc6224994d69..7788808dcd0b 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC
 Required properties:
 - compatible : "nvidia,tegra-audio-rt5640"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index aab6ce0ad2fc..96f6a57dd6b4 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-wm8753"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index 4b44dfb6ca0d..b795d282818d 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-wm8903"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
index ad589b163639..436f6cd9d07c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
 Required properties:
 - compatible : "nvidia,tegra-audio-wm9712"
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
index c1454979c1ef..eaf00102d92c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -4,19 +4,33 @@ Required properties:
 - compatible : "nvidia,tegra20-ac97"
 - reg : Should contain AC97 controller registers location and length
 - interrupts : Should contain AC97 interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for the AC97 controller
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - ac97
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
   of the GPIO used to reset the external AC97 codec
 - nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
   of the GPIO corresponding with the AC97 DAP _FS line
+
 Example:
 
 ac97@70002000 {
 	compatible = "nvidia,tegra20-ac97";
 	reg = <0x70002000 0x200>;
 	interrupts = <0 81 0x04>;
-	nvidia,dma-request-selector = <&apbdma 12>;
 	nvidia,codec-reset-gpio = <&gpio 170 0>;
 	nvidia,codec-sync-gpio = <&gpio 120 0>;
+	clocks = <&tegra_car 3>;
+	resets = <&tegra_car 3>;
+	reset-names = "ac97";
+	dmas = <&apbdma 12>, <&apbdma 12>;
+	dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
index 0df2b5c816e3..dc30c6bfbe95 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : "nvidia,tegra20-i2s"
 - reg : Should contain I2S registers location and length
 - interrupts : Should contain I2S interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this I2S controller
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2s
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -13,5 +22,9 @@ i2s@70002800 {
 	compatible = "nvidia,tegra20-i2s";
 	reg = <0x70002800 0x200>;
 	interrupts = < 45 >;
-	nvidia,dma-request-selector = < &apbdma 2 >;
+	clocks = <&tegra_car 11>;
+	resets = <&tegra_car 11>;
+	reset-names = "i2s";
+	dmas = <&apbdma 21>, <&apbdma 21>;
+	dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 0e5c12c66523..946e2ac46091 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -7,18 +7,48 @@ Required properties:
   - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
   - Tegra114 requires an additional entry, for the APBIF2 register block.
 - interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
-  entry contains the Tegra DMA controller's phandle and request selector.
-  If a single entry is present, the request selectors for the channels are
-  assumed to be contiguous, and increment from this value.
-  If multiple values are given, one value must be given per channel.
-- clocks : Must contain an entry for each required entry in clock-names.
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
-  - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
-    dam1, dam2, spdif_in.
-  - Tegra114: Additionally requires amx, adx.
+  - d_audio
+  - apbif
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  Tegra30 and later:
+  - d_audio
+  - apbif
+  - i2s0
+  - i2s1
+  - i2s2
+  - i2s3
+  - i2s4
+  - dam0
+  - dam1
+  - dam2
+  - spdif
+  Tegra114 and later additionally require:
+  - amx
+  - adx
+  Tegra124 and later additionally require:
+  - amx1
+  - adx1
+  - afc0
+  - afc1
+  - afc2
+  - afc3
+  - afc4
+  - afc5
 - ranges : The bus address mapping for the configlink register bus.
   Can be empty since the mapping is 1:1.
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx0 .. rx<n>
+  - tx0 .. tx<n>
+  ... where n is:
+  Tegra30: 3
+  Tegra114, Tegra124: 9
 - #address-cells : For the configlink bus. Should be <1>;
 - #size-cells : For the configlink bus. Should be <1>.
 
@@ -35,13 +65,20 @@ ahub@70080000 {
 	reg = <0x70080000 0x200 0x70080200 0x100>;
 	interrupts = < 0 103 0x04 >;
 	nvidia,dma-request-selector = <&apbdma 1>;
-	clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+	clocks = <&tegra_car 106>, <&tegra_car 107>;
+	clock-names = "d_audio", "apbif";
+	resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
 		<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
 		<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
-		<&tegra_car 110>, <&tegra_car 162>;
-	clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+		<&tegra_car 110>, <&tegra_car 10>;
+	reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
 		"i2s3", "i2s4", "dam0", "dam1", "dam2",
-		"spdif_in";
+		"spdif";
+	dmas = <&apbdma 1>, <&apbdma 1>;
+	       <&apbdma 2>, <&apbdma 2>;
+	       <&apbdma 3>, <&apbdma 3>;
+	       <&apbdma 4>, <&apbdma 4>;
+	dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
 	ranges;
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
index dfa6c037124a..0c113ffe3814 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
@@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller
 Required properties:
 - compatible : "nvidia,tegra30-i2s"
 - reg : Should contain I2S registers location and length
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2s
 - nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
   first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
 
 Example:
 
-i2s@70002800 {
+i2s@70080300 {
 	compatible = "nvidia,tegra30-i2s";
 	reg = <0x70080300 0x100>;
 	nvidia,ahub-cif-ids = <4 4>;
+	clocks = <&tegra_car 11>;
+	resets = <&tegra_car 11>;
+	reset-names = "i2s";
 };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index 91ff771c7e77..7ea701e07dc2 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -4,10 +4,19 @@ Required properties:
 - compatible : should be "nvidia,tegra114-spi".
 - reg: Should contain SPI registers location and length.
 - interrupts: Should contain SPI interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SPI controller.
-- This is also require clock named "spi" as per binding document
-  Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names : Must include the following entries:
+  - spi
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -18,9 +27,14 @@ spi@7000d600 {
 	compatible = "nvidia,tegra114-spi";
 	reg = <0x7000d600 0x200>;
 	interrupts = <0 82 0x04>;
-	nvidia,dma-request-selector = <&apbdma 16>;
 	spi-max-frequency = <25000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&tegra_car 44>;
+	clock-names = "spi";
+	resets = <&tegra_car 44>;
+	reset-names = "spi";
+	dmas = <&apbdma 16>, <&apbdma 16>;
+	dma-names = "rx", "tx";
 	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
index 7b53da5cb75b..bdf08e6dec9b 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : should be "nvidia,tegra20-sflash".
 - reg: Should contain SFLASH registers location and length.
 - interrupts: Should contain SFLASH interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SFLASH controller.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -17,10 +26,13 @@ spi@7000c380 {
 	compatible = "nvidia,tegra20-sflash";
 	reg = <0x7000c380 0x80>;
 	interrupts = <0 39 0x04>;
-	nvidia,dma-request-selector = <&apbdma 16>;
 	spi-max-frequency = <25000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&tegra_car 43>;
+	resets = <&tegra_car 43>;
+	reset-names = "spi";
+	dmas = <&apbdma 11>, <&apbdma 11>;
+	dma-names = "rx", "tx";
 	status = "disabled";
 };
-
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index eefe15e3d95e..5db9144a33c8 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -4,8 +4,17 @@ Required properties:
 - compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
 - reg: Should contain SLINK registers location and length.
 - interrupts: Should contain SLINK interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this SLINK controller.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Recommended properties:
 - spi-max-frequency: Definition as per
@@ -17,10 +26,13 @@ spi@7000d600 {
 	compatible = "nvidia,tegra20-slink";
 	reg = <0x7000d600 0x200>;
 	interrupts = <0 82 0x04>;
-	nvidia,dma-request-selector = <&apbdma 16>;
 	spi-max-frequency = <25000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&tegra_car 44>;
+	resets = <&tegra_car 44>;
+	reset-names = "spi";
+	dmas = <&apbdma 16>, <&apbdma 16>;
+	dma-names = "rx", "tx";
 	status = "disabled";
 };
-
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
deleted file mode 100644
index 6b9e51896693..000000000000
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
index e019fdc38773..4a864bd10d3d 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
@@ -8,6 +8,8 @@ Required properties:
 - compatible : should be "nvidia,tegra20-timer".
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A list of 4 interrupts; one per timer channel.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -18,4 +20,5 @@ timer {
 			0 1 0x04
 			0 41 0x04
 			0 42 0x04>;
+	clocks = <&tegra_car 132>;
 };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
index 906109d4c593..b5082a1cf461 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
@@ -10,6 +10,8 @@ Required properties:
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A list of 6 interrupts; one per each of timer channels 1
     through 5, and one for the shared interrupt for the remaining channels.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 timer {
 	compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
@@ -20,4 +22,5 @@ timer {
 		      0 42 0x04
 		      0 121 0x04
 		      0 122 0x04>;
+	clocks = <&tegra_car 214>;
 };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index df0933043a5b..3dc9140e3dfb 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -8,7 +8,12 @@ and additions :
 Required properties :
  - compatible : Should be "nvidia,tegra20-ehci".
  - nvidia,phy : phandle of the PHY that the controller is connected to.
- - clocks : Contains a single entry which defines the USB controller's clock.
+ - clocks : Must contain one entry, for the module clock.
+   See ../clocks/clock-bindings.txt for details.
+ - resets : Must contain an entry for each entry in reset-names.
+   See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+   - usb
 
 Optional properties:
  - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ce95ed1c6d3e..edbb8d88c85e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -32,12 +32,14 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt	Global Mixed-mode Technology, Inc.
 hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.
diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX
new file mode 100644
index 000000000000..1de43ae46ae6
--- /dev/null
+++ b/Documentation/gpio/00-INDEX
@@ -0,0 +1,14 @@
+00-INDEX
+	- This file
+gpio.txt
+	- Introduction to GPIOs and their kernel interfaces
+consumer.txt
+	- How to obtain and use GPIOs in a driver
+driver.txt
+	- How to write a GPIO driver
+board.txt
+	- How to assign GPIOs to a consumer device and a function
+sysfs.txt
+	- Information about the GPIO sysfs interface
+gpio-legacy.txt
+	- Historical documentation of the deprecated GPIO integer interface