Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	Documentation/networking/ip-sysctl.txt
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

Both conflicts were simply overlapping context.

A build fix for qlcnic is in here too, simply removing the added
devinit annotations which no longer exist.

Signed-off-by: David S. Miller <davem@davemloft.net>

19 files changed, 135 insertions, 65 deletions

diff --git a/Documentation/DocBook/media/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml
index eacafe312cd2..7c6638bacedb 100644
--- a/Documentation/DocBook/media/v4l/driver.xml
+++ b/Documentation/DocBook/media/v4l/driver.xml
@@ -116,7 +116,7 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void __devexit
+static void
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
@@ -124,7 +124,7 @@ my_remove               (struct pci_dev *               pci_dev)
 	/* Describe me. */
 }
 
-static int __devinit
+static int
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = __devexit_p (my_remove),
+	.remove   = my_remove,
 
 	/* Power management functions. */
 	.suspend  = my_suspend,
diff --git a/Documentation/PCI/pci-iov-howto.txt b/Documentation/PCI/pci-iov-howto.txt
index cfaca7e69893..86551cc72e03 100644
--- a/Documentation/PCI/pci-iov-howto.txt
+++ b/Documentation/PCI/pci-iov-howto.txt
@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
 	return 0;
 }
 
-static void __devexit dev_remove(struct pci_dev *dev)
+static void dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	__devexit_p(dev_remove),
+	.remove =	dev_remove,
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index aa09e5476bba..bccf602a87f5 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
-
-	__devinit	Device initialization code.
-			Identical to __init if the kernel is not compiled
-			with CONFIG_HOTPLUG, normal function otherwise.
-	__devexit	The same for __exit.
-
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
@@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:
 
 	o Do not mark the struct pci_driver.
 
-	o The ID table array should be marked __devinitconst; this is done
-	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
-
-	o The probe() and remove() functions should be marked __devinit
-	  and __devexit respectively.  All initialization functions
-	  exclusively called by the probe() routine, can be marked __devinit.
-	  Ditto for remove() and __devexit.
-
-	o If mydriver_remove() is marked with __devexit(), then all address
-	  references to mydriver_remove must use __devexit_p(mydriver_remove)
-	  (in the struct pci_driver declaration for example).
-	  __devexit_p() will generate the function name _or_ NULL if the
-	  function will be discarded.  For an example, see drivers/net/tg3.c.
-
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 4f27785ca0c8..54469bc81b1c 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= __devexit_p(mpu3050_remove),
+		.remove		= mpu3050_remove,
 		.id_table	= mpu3050_ids,
 	};
 
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
index baadbb11fe98..5083c0b834b2 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006c000 {
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
index c2a3525ecb4e..db4f2f05c4d0 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };
 
 uart1: serial@43f90000 {
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
index 52a49a4a50b3..e6587af62ff0 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006a000 {
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index d77b4e68dc42..f73fdf595568 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };
 
 uart1: serial@02020000 {
diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
index 558cdf3c9abc..d4eab9227ea4 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -13,10 +28,9 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
-
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
new file mode 100644
index 000000000000..c596a6ad3285
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible	: "sirf,prima2-pinctrl"
+- reg		: Address range of the pinctrl registers
+- interrupts    : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+         uart {
+                 sirf,pins = "uart2grp";
+                 sirf,function = "uart2";
+         };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+         uart {
+                 sirf,pins = "uart2_nostreamctrlgrp";
+                 sirf,function = "uart2_nostreamctrl";
+         };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@0xb0070000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_noflow_pins_a>;
+}
diff --git a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt
new file mode 100644
index 000000000000..80a37193c0b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt
@@ -0,0 +1,10 @@
+Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
+
+Required properties:
+	compatible = "ti,twl4030-wdt";
+
+Example:
+
+watchdog {
+	compatible = "ti,twl4030-wdt";
+};
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index abf63615ee05..22182660dda7 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
 
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	(...)
 	struct i2c_adapter *i2c_adap;
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 51dcd52a91c4..497656473b1c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
 	The maximum number of bytes which may be used by packets
 	queued for each	unresolved address by other network layers.
 	(added in linux 3.3)
-	Seting negative value is meaningless and will retrun error.
+	Setting negative value is meaningless and will return error.
 	Default: 65536 Bytes(64KB)
 
 neigh/default/unres_qlen - INTEGER
@@ -504,7 +504,7 @@ tcp_fastopen - INTEGER
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
 	will be retransmitted. Should not be higher than 255. Default value
-	is 6, which corresponds to 63seconds till the last restransmission
+	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.
 
@@ -1332,6 +1332,12 @@ force_tllao - BOOLEAN
 	race condition where the sender deletes the cached link-layer address
 	prior to receiving a response to a previous solicitation."
 
+ndisc_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+	0 - (default): do nothing
+	1 - Generate unsolicited neighbour advertisements when device is brought
+	    up or hardware address changes.
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
@@ -1531,7 +1537,7 @@ cookie_hmac_alg - STRING
 	* sha1
 	* none
 	Ability to assign md5 or sha1 as the selected alg is predicated on the
-	configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
+	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
 	CONFIG_CRYPTO_SHA1).
 
 	Default: Dependent on configuration.  MD5 if available, else SHA1 if
@@ -1549,7 +1555,7 @@ rcvbuf_policy - INTEGER
 	blocking.
 
 	1: rcvbuf space is per association
-	0: recbuf space is per socket
+	0: rcvbuf space is per socket
 
 	Default: 0
 
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 4abe83e1045a..03591a750f99 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -642,12 +642,13 @@ out the following operations:
   * During system suspend it calls pm_runtime_get_noresume() and
     pm_runtime_barrier() for every device right before executing the
     subsystem-level .suspend() callback for it.  In addition to that it calls
-    pm_runtime_disable() for every device right after executing the
-    subsystem-level .suspend() callback for it.
+    __pm_runtime_disable() with 'false' as the second argument for every device
+    right before executing the subsystem-level .suspend_late() callback for it.
 
   * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
-    for every device right before and right after executing the subsystem-level
-    .resume() callback for it, respectively.
+    for every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .resume() callback
+    for it, respectively.
 
 7. Generic subsystem callbacks
 
diff --git a/Documentation/rpmsg.txt b/Documentation/rpmsg.txt
index 409d9f964c5b..f7edc3aa1e92 100644
--- a/Documentation/rpmsg.txt
+++ b/Documentation/rpmsg.txt
@@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
 	return 0;
 }
 
-static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
+static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
 {
 	dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
 }
@@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
 	.id_table	= rpmsg_driver_sample_id_table,
 	.probe		= rpmsg_sample_probe,
 	.callback	= rpmsg_sample_cb,
-	.remove		= __devexit_p(rpmsg_sample_remove),
+	.remove		= rpmsg_sample_remove,
 };
 
 static int __init init(void)
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 7312ec14dd89..2331eb214146 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
 		},
 
 		.probe		= CHIP_probe,
-		.remove		= __devexit_p(CHIP_remove),
+		.remove		= CHIP_remove,
 		.suspend	= CHIP_suspend,
 		.resume		= CHIP_resume,
 	};
@@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP".  Your probe() code
 might look like this unless you're creating a device which is managing
 a bus (appearing under /sys/class/spi_master).
 
-	static int __devinit CHIP_probe(struct spi_device *spi)
+	static int CHIP_probe(struct spi_device *spi)
 	{
 		struct CHIP			*chip;
 		struct CHIP_platform_data	*pdata;
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 2907ba6c3607..ccd42589e124 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -38,6 +38,7 @@ show up in /proc/sys/kernel:
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
 - modules_disabled
+- msg_next_id		      [ sysv ipc ]
 - msgmax
 - msgmnb
 - msgmni
@@ -62,7 +63,9 @@ show up in /proc/sys/kernel:
 - rtsig-max
 - rtsig-nr
 - sem
+- sem_next_id		      [ sysv ipc ]
 - sg-big-buff                 [ generic SCSI device (sg) ]
+- shm_next_id		      [ sysv ipc ]
 - shm_rmid_forced
 - shmall
 - shmmax                      [ sysv ipc ]
@@ -320,6 +323,22 @@ to false.
 
 ==============================================================
 
+msg_next_id, sem_next_id, and shm_next_id:
+
+These three toggles allows to specify desired id for next allocated IPC
+object: message, semaphore or shared memory respectively.
+
+By default they are equal to -1, which means generic allocation logic.
+Possible values to set are in range {0..INT_MAX}.
+
+Notes:
+1) kernel doesn't guarantee, that new object will have desired id. So,
+it's up to userspace, how to handle an object with "wrong" id.
+2) Toggle with non-default value will be set back to -1 by kernel after
+successful IPC object allocation.
+
+==============================================================
+
 nmi_watchdog:
 
 Enables/Disables the NMI watchdog on x86 systems. When the value is
@@ -542,6 +561,19 @@ are doing anyway :)
 
 ==============================================================
 
+shmall:
+
+This parameter sets the total amount of shared memory pages that
+can be used system wide. Hence, SHMALL should always be at least
+ceil(shmmax/PAGE_SIZE).
+
+If you are not sure what the default PAGE_SIZE is on your Linux
+system, you can run the following command:
+
+# getconf PAGE_SIZE
+
+==============================================================
+
 shmmax:
 
 This value can be used to query and set the run time limit
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 32bfe926e8d7..b89567ad04b7 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -174,8 +174,7 @@ The recommended approach is as follows:
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;
diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt
index 3e74f13af426..44c1d934c4e3 100644
--- a/Documentation/zh_CN/video4linux/v4l2-framework.txt
+++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt
@@ -182,8 +182,7 @@ int iterate(void *p)
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;