Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features and Enhancements for 5.7 part1

1. Allow to disable gisa
2. protected virtual machines
  Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
  state like guest memory and guest registers anymore. Instead the
  PVMs are mostly managed by a new entity called Ultravisor (UV),
  which provides an API, so KVM and the PV can request management
  actions.

  PVMs are encrypted at rest and protected from hypervisor access
  while running.  They switch from a normal operation into protected
  mode, so we can still use the standard boot process to load a
  encrypted blob and then move it into protected mode.

  Rebooting is only possible by passing through the unprotected/normal
  mode and switching to protected again.

  One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
  add callbacks for inaccessible pages)

8 files changed, 278 insertions, 12 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index dbc22d684627..b0beae9b9e36 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3795,6 +3795,11 @@
 			before loading.
 			See Documentation/admin-guide/blockdev/ramdisk.rst.
 
+	prot_virt=	[S390] enable hosting protected virtual machines
+			isolated from the hypervisor (if hardware supports
+			that).
+			Format: <bool>
+
 	psi=		[KNL] Enable or disable pressure stall information
 			tracking.
 			Format: <bool>
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
index dc194b2c151a..cdcaa3f52d25 100644
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
@@ -1,9 +1,10 @@
-Ilitek ILI210x/ILI2117/ILI251x touchscreen controller
+Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
 
 Required properties:
 - compatible:
     ilitek,ili210x for ILI210x
     ilitek,ili2117 for ILI2117
+    ilitek,ili2120 for ILI2120
     ilitek,ili251x for ILI251x
 
 - reg: The I2C address of the device
diff --git a/Documentation/driver-api/ipmb.rst b/Documentation/driver-api/ipmb.rst
index 3ec3baed84c4..209c49e05116 100644
--- a/Documentation/driver-api/ipmb.rst
+++ b/Documentation/driver-api/ipmb.rst
@@ -71,9 +71,13 @@ b) Example for device tree::
             ipmb@10 {
                     compatible = "ipmb-dev";
                     reg = <0x10>;
+                    i2c-protocol;
             };
      };
 
+If xmit of data to be done using raw i2c block vs smbus
+then "i2c-protocol" needs to be defined as above.
+
 2) Manually from Linux::
 
      modprobe ipmb-dev-int
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index b7d4180605ab..158d1186d103 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -2110,7 +2110,8 @@ Errors:
 
   ======   ============================================================
   ENOENT   no such register
-  EINVAL   invalid register ID, or no such register
+  EINVAL   invalid register ID, or no such register or used with VMs in
+           protected virtualization mode on s390
   EPERM    (arm64) register access not allowed before vcpu finalization
   ======   ============================================================
 
@@ -2545,7 +2546,8 @@ Errors include:
 
   ======== ============================================================
   ENOENT   no such register
-  EINVAL   invalid register ID, or no such register
+  EINVAL   invalid register ID, or no such register or used with VMs in
+           protected virtualization mode on s390
   EPERM    (arm64) register access not allowed before vcpu finalization
   ======== ============================================================
 
@@ -4635,6 +4637,54 @@ the clear cpu reset definition in the POP. However, the cpu is not put
 into ESA mode. This reset is a superset of the initial reset.
 
 
+4.125 KVM_S390_PV_COMMAND
+-------------------------
+
+:Capability: KVM_CAP_S390_PROTECTED
+:Architectures: s390
+:Type: vm ioctl
+:Parameters: struct kvm_pv_cmd
+:Returns: 0 on success, < 0 on error
+
+::
+
+  struct kvm_pv_cmd {
+	__u32 cmd;	/* Command to be executed */
+	__u16 rc;	/* Ultravisor return code */
+	__u16 rrc;	/* Ultravisor return reason code */
+	__u64 data;	/* Data or address */
+	__u32 flags;    /* flags for future extensions. Must be 0 for now */
+	__u32 reserved[3];
+  };
+
+cmd values:
+
+KVM_PV_ENABLE
+  Allocate memory and register the VM with the Ultravisor, thereby
+  donating memory to the Ultravisor that will become inaccessible to
+  KVM. All existing CPUs are converted to protected ones. After this
+  command has succeeded, any CPU added via hotplug will become
+  protected during its creation as well.
+
+KVM_PV_DISABLE
+
+  Deregister the VM from the Ultravisor and reclaim the memory that
+  had been donated to the Ultravisor, making it usable by the kernel
+  again.  All registered VCPUs are converted back to non-protected
+  ones.
+
+KVM_PV_VM_SET_SEC_PARMS
+  Pass the image header from VM memory to the Ultravisor in
+  preparation of image unpacking and verification.
+
+KVM_PV_VM_UNPACK
+  Unpack (protect and decrypt) a page of the encrypted boot image.
+
+KVM_PV_VM_VERIFY
+  Verify the integrity of the unpacked image. Only if this succeeds,
+  KVM is allowed to start protected VCPUs.
+
+
 5. The kvm_run structure
 ========================
 
@@ -6025,3 +6075,14 @@ Architectures: s390
 
 This capability indicates that the KVM_S390_NORMAL_RESET and
 KVM_S390_CLEAR_RESET ioctls are available.
+
+8.23 KVM_CAP_S390_PROTECTED
+
+Architecture: s390
+
+
+This capability indicates that the Ultravisor has been initialized and
+KVM can therefore start protected VMs.
+This capability governs the KVM_S390_PV_COMMAND ioctl and the
+KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected
+guests when the state change is invalid.
diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst
index 954190da7d04..ea96559ba501 100644
--- a/Documentation/virt/kvm/devices/s390_flic.rst
+++ b/Documentation/virt/kvm/devices/s390_flic.rst
@@ -108,16 +108,9 @@ Groups:
       mask or unmask the adapter, as specified in mask
 
     KVM_S390_IO_ADAPTER_MAP
-      perform a gmap translation for the guest address provided in addr,
-      pin a userspace page for the translated address and add it to the
-      list of mappings
-
-      .. note:: A new mapping will be created unconditionally; therefore,
-	        the calling code should avoid making duplicate mappings.
-
+      This is now a no-op. The mapping is purely done by the irq route.
     KVM_S390_IO_ADAPTER_UNMAP
-      release a userspace page for the translated address specified in addr
-      from the list of mappings
+      This is now a no-op. The mapping is purely done by the irq route.
 
   KVM_DEV_FLIC_AISM
     modify the adapter-interruption-suppression mode for a given isc if the
diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst
index 774deaebf7fa..dcc252634cf9 100644
--- a/Documentation/virt/kvm/index.rst
+++ b/Documentation/virt/kvm/index.rst
@@ -18,6 +18,8 @@ KVM
    nested-vmx
    ppc-pv
    s390-diag
+   s390-pv
+   s390-pv-boot
    timekeeping
    vcpu-requests
 
diff --git a/Documentation/virt/kvm/s390-pv-boot.rst b/Documentation/virt/kvm/s390-pv-boot.rst
new file mode 100644
index 000000000000..8b8fa0390409
--- /dev/null
+++ b/Documentation/virt/kvm/s390-pv-boot.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+s390 (IBM Z) Boot/IPL of Protected VMs
+======================================
+
+Summary
+-------
+The memory of Protected Virtual Machines (PVMs) is not accessible to
+I/O or the hypervisor. In those cases where the hypervisor needs to
+access the memory of a PVM, that memory must be made accessible.
+Memory made accessible to the hypervisor will be encrypted. See
+:doc:`s390-pv` for details."
+
+On IPL (boot) a small plaintext bootloader is started, which provides
+information about the encrypted components and necessary metadata to
+KVM to decrypt the protected virtual machine.
+
+Based on this data, KVM will make the protected virtual machine known
+to the Ultravisor (UV) and instruct it to secure the memory of the
+PVM, decrypt the components and verify the data and address list
+hashes, to ensure integrity. Afterwards KVM can run the PVM via the
+SIE instruction which the UV will intercept and execute on KVM's
+behalf.
+
+As the guest image is just like an opaque kernel image that does the
+switch into PV mode itself, the user can load encrypted guest
+executables and data via every available method (network, dasd, scsi,
+direct kernel, ...) without the need to change the boot process.
+
+
+Diag308
+-------
+This diagnose instruction is the basic mechanism to handle IPL and
+related operations for virtual machines. The VM can set and retrieve
+IPL information blocks, that specify the IPL method/devices and
+request VM memory and subsystem resets, as well as IPLs.
+
+For PVMs this concept has been extended with new subcodes:
+
+Subcode 8: Set an IPL Information Block of type 5 (information block
+for PVMs)
+Subcode 9: Store the saved block in guest memory
+Subcode 10: Move into Protected Virtualization mode
+
+The new PV load-device-specific-parameters field specifies all data
+that is necessary to move into PV mode.
+
+* PV Header origin
+* PV Header length
+* List of Components composed of
+   * AES-XTS Tweak prefix
+   * Origin
+   * Size
+
+The PV header contains the keys and hashes, which the UV will use to
+decrypt and verify the PV, as well as control flags and a start PSW.
+
+The components are for instance an encrypted kernel, kernel parameters
+and initrd. The components are decrypted by the UV.
+
+After the initial import of the encrypted data, all defined pages will
+contain the guest content. All non-specified pages will start out as
+zero pages on first access.
+
+
+When running in protected virtualization mode, some subcodes will result in
+exceptions or return error codes.
+
+Subcodes 4 and 7, which specify operations that do not clear the guest
+memory, will result in specification exceptions. This is because the
+UV will clear all memory when a secure VM is removed, and therefore
+non-clearing IPL subcodes are not allowed.
+
+Subcodes 8, 9, 10 will result in specification exceptions.
+Re-IPL into a protected mode is only possible via a detour into non
+protected mode.
+
+Keys
+----
+Every CEC will have a unique public key to enable tooling to build
+encrypted images.
+See  `s390-tools <https://github.com/ibm-s390-tools/s390-tools/>`_
+for the tooling.
diff --git a/Documentation/virt/kvm/s390-pv.rst b/Documentation/virt/kvm/s390-pv.rst
new file mode 100644
index 000000000000..774a8c606091
--- /dev/null
+++ b/Documentation/virt/kvm/s390-pv.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+s390 (IBM Z) Ultravisor and Protected VMs
+=========================================
+
+Summary
+-------
+Protected virtual machines (PVM) are KVM VMs that do not allow KVM to
+access VM state like guest memory or guest registers. Instead, the
+PVMs are mostly managed by a new entity called Ultravisor (UV). The UV
+provides an API that can be used by PVMs and KVM to request management
+actions.
+
+Each guest starts in non-protected mode and then may make a request to
+transition into protected mode. On transition, KVM registers the guest
+and its VCPUs with the Ultravisor and prepares everything for running
+it.
+
+The Ultravisor will secure and decrypt the guest's boot memory
+(i.e. kernel/initrd). It will safeguard state changes like VCPU
+starts/stops and injected interrupts while the guest is running.
+
+As access to the guest's state, such as the SIE state description, is
+normally needed to be able to run a VM, some changes have been made in
+the behavior of the SIE instruction. A new format 4 state description
+has been introduced, where some fields have different meanings for a
+PVM. SIE exits are minimized as much as possible to improve speed and
+reduce exposed guest state.
+
+
+Interrupt injection
+-------------------
+Interrupt injection is safeguarded by the Ultravisor. As KVM doesn't
+have access to the VCPUs' lowcores, injection is handled via the
+format 4 state description.
+
+Machine check, external, IO and restart interruptions each can be
+injected on SIE entry via a bit in the interrupt injection control
+field (offset 0x54). If the guest cpu is not enabled for the interrupt
+at the time of injection, a validity interception is recognized. The
+format 4 state description contains fields in the interception data
+block where data associated with the interrupt can be transported.
+
+Program and Service Call exceptions have another layer of
+safeguarding; they can only be injected for instructions that have
+been intercepted into KVM. The exceptions need to be a valid outcome
+of an instruction emulation by KVM, e.g. we can never inject a
+addressing exception as they are reported by SIE since KVM has no
+access to the guest memory.
+
+
+Mask notification interceptions
+-------------------------------
+KVM cannot intercept lctl(g) and lpsw(e) anymore in order to be
+notified when a PVM enables a certain class of interrupt.  As a
+replacement, two new interception codes have been introduced: One
+indicating that the contents of CRs 0, 6, or 14 have been changed,
+indicating different interruption subclasses; and one indicating that
+PSW bit 13 has been changed, indicating that a machine check
+intervention was requested and those are now enabled.
+
+Instruction emulation
+---------------------
+With the format 4 state description for PVMs, the SIE instruction already
+interprets more instructions than it does with format 2. It is not able
+to interpret every instruction, but needs to hand some tasks to KVM;
+therefore, the SIE and the ultravisor safeguard emulation inputs and outputs.
+
+The control structures associated with SIE provide the Secure
+Instruction Data Area (SIDA), the Interception Parameters (IP) and the
+Secure Interception General Register Save Area.  Guest GRs and most of
+the instruction data, such as I/O data structures, are filtered.
+Instruction data is copied to and from the SIDA when needed.  Guest
+GRs are put into / retrieved from the Secure Interception General
+Register Save Area.
+
+Only GR values needed to emulate an instruction will be copied into this
+save area and the real register numbers will be hidden.
+
+The Interception Parameters state description field still contains the
+the bytes of the instruction text, but with pre-set register values
+instead of the actual ones. I.e. each instruction always uses the same
+instruction text, in order not to leak guest instruction text.
+This also implies that the register content that a guest had in r<n>
+may be in r<m> from the hypervisor's point of view.
+
+The Secure Instruction Data Area contains instruction storage
+data. Instruction data, i.e. data being referenced by an instruction
+like the SCCB for sclp, is moved via the SIDA. When an instruction is
+intercepted, the SIE will only allow data and program interrupts for
+this instruction to be moved to the guest via the two data areas
+discussed before. Other data is either ignored or results in validity
+interceptions.
+
+
+Instruction emulation interceptions
+-----------------------------------
+There are two types of SIE secure instruction intercepts: the normal
+and the notification type. Normal secure instruction intercepts will
+make the guest pending for instruction completion of the intercepted
+instruction type, i.e. on SIE entry it is attempted to complete
+emulation of the instruction with the data provided by KVM. That might
+be a program exception or instruction completion.
+
+The notification type intercepts inform KVM about guest environment
+changes due to guest instruction interpretation. Such an interception
+is recognized, for example, for the store prefix instruction to provide
+the new lowcore location. On SIE reentry, any KVM data in the data areas
+is ignored and execution continues as if the guest instruction had
+completed. For that reason KVM is not allowed to inject a program
+interrupt.
+
+Links
+-----
+`KVM Forum 2019 presentation <https://static.sched.com/hosted_files/kvmforum2019/3b/ibm_protected_vms_s390x.pdf>`_