Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...

17 files changed, 271 insertions, 196 deletions

diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Microchip/README
index afb13c15389d..a366f37d38f1 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Microchip/README
@@ -1,54 +1,54 @@
-ARM Atmel SoCs (aka AT91)
-=========================
+ARM Microchip SoCs (aka AT91)
+=============================
 
 
 Introduction
 ------------
-This document gives useful information about the ARM Atmel SoCs that are
+This document gives useful information about the ARM Microchip SoCs that are
 currently supported in Linux Mainline (you know, the one on kernel.org).
 
-It is important to note that the Atmel | SMART ARM-based MPU product line is
-historically named "AT91" or "at91" throughout the Linux kernel development
-process even if this product prefix has completely disappeared from the
-official Atmel product name. Anyway, files, directories, git trees,
+It is important to note that the Microchip (previously Atmel) ARM-based MPU
+product line is historically named "AT91" or "at91" throughout the Linux kernel
+development process even if this product prefix has completely disappeared from
+the official Microchip product name. Anyway, files, directories, git trees,
 git branches/tags and email subject always contain this "at91" sub-string.
 
 
 AT91 SoCs
 ---------
 Documentation and detailed datasheet for each product are available on
-the Atmel website: http://www.atmel.com.
+the Microchip website: http://www.microchip.com.
 
   Flavors:
     * ARM 920 based SoC
       - at91rm9200
         + Datasheet
-          http://www.atmel.com/Images/doc1768.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf
 
     * ARM 926 based SoCs
       - at91sam9260
         + Datasheet
-          http://www.atmel.com/Images/doc6221.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf
 
       - at91sam9xe
         + Datasheet
-          http://www.atmel.com/Images/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf
 
       - at91sam9261
         + Datasheet
-          http://www.atmel.com/Images/doc6062.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf
 
       - at91sam9263
         + Datasheet
-          http://www.atmel.com/Images/Atmel_6249_32-bit-ARM926EJ-S-Microcontroller_SAM9263_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf
 
       - at91sam9rl
         + Datasheet
-          http://www.atmel.com/Images/doc6289.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
 
       - at91sam9g20
         + Datasheet
-          http://www.atmel.com/Images/doc6384.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf
 
       - at91sam9g45 family
         - at91sam9g45
@@ -56,7 +56,7 @@ the Atmel website: http://www.atmel.com.
         - at91sam9m10
         - at91sam9m11 (device superset)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
 
       - at91sam9x5 family (aka "The 5 series")
         - at91sam9g15
@@ -65,11 +65,11 @@ the Atmel website: http://www.atmel.com.
         - at91sam9x25
         - at91sam9x35
         + Datasheet (can be considered as covering the whole family)
-          http://www.atmel.com/Images/Atmel_11055_32-bit-ARM926EJ-S-Microcontroller_SAM9X35_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf
 
       - at91sam9n12
         + Datasheet
-          http://www.atmel.com/Images/Atmel_11063_32-bit-ARM926EJ-S-Microcontroller_SAM9N12CN11CN12_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf
 
     * ARM Cortex-A5 based SoCs
       - sama5d3 family
@@ -79,7 +79,7 @@ the Atmel website: http://www.atmel.com.
         - sama5d35
         - sama5d36 (device superset)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
 
     * ARM Cortex-A5 + NEON based SoCs
       - sama5d4 family
@@ -88,7 +88,7 @@ the Atmel website: http://www.atmel.com.
         - sama5d43
         - sama5d44 (device superset)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf
 
       - sama5d2 family
         - sama5d21
@@ -99,7 +99,7 @@ the Atmel website: http://www.atmel.com.
         - sama5d27 (device superset)
         - sama5d28 (device superset + environmental monitors)
         + Datasheet
-          http://www.atmel.com/Images/Atmel-11267-32-bit-Cortex-A5-Microcontroller-SAMA5D2_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
 
     * ARM Cortex-M7 MCUs
       - sams70 family
@@ -112,8 +112,6 @@ the Atmel website: http://www.atmel.com.
         - sams70q19
         - sams70q20
         - sams70q21
-        + Datasheet
-          http://www.atmel.com/Images/Atmel-11242-32-bit-Cortex-M7-Microcontroller-SAM-S70Q-SAM-S70N-SAM-S70J_Datasheet.pdf
 
       - samv70 family
         - samv70j19
@@ -122,8 +120,6 @@ the Atmel website: http://www.atmel.com.
         - samv70n20
         - samv70q19
         - samv70q20
-        + Datasheet
-          http://www.atmel.com/Images/Atmel-11297-32-bit-Cortex-M7-Microcontroller-SAM-V70Q-SAM-V70N-SAM-V70J_Datasheet.pdf
 
       - samv71 family
         - samv71j19
@@ -135,13 +131,15 @@ the Atmel website: http://www.atmel.com.
         - samv71q19
         - samv71q20
         - samv71q21
+
         + Datasheet
-          http://www.atmel.com/Images/Atmel-44003-32-bit-Cortex-M7-Microcontroller-SAM-V71Q-SAM-V71N-SAM-V71J_Datasheet.pdf
+          http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf
+
 
 Linux kernel information
 ------------------------
 Linux kernel mach directory: arch/arm/mach-at91
-MAINTAINERS entry is: "ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES"
+MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support"
 
 
 Device Tree for AT91 SoCs and boards
diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst
new file mode 100644
index 000000000000..85cfc8410798
--- /dev/null
+++ b/Documentation/arm/stm32/overview.rst
@@ -0,0 +1,34 @@
+========================
+STM32 ARM Linux Overview
+========================
+
+Introduction
+------------
+
+The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ARM Linux.
+
+Configuration
+-------------
+
+For MCUs, use the provided default configuration:
+        make stm32_defconfig
+For MPUs, use multi_v7 configuration:
+        make multi_v7_defconfig
+
+Layout
+------
+
+All the files for multiple machine families are located in the platform code
+contained in arch/arm/mach-stm32
+
+There is a generic board board-dt.c in the mach folder which support
+Flattened Device Tree, which means, it works with any compatible board with
+Device Trees.
+
+:Authors:
+
+- Maxime Coquelin <mcoquelin.stm32@gmail.com>
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
deleted file mode 100644
index a03b0357c017..000000000000
--- a/Documentation/arm/stm32/overview.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-			STM32 ARM Linux Overview
-			========================
-
-Introduction
-------------
-
-  The STMicroelectronics family of Cortex-M based MCUs are supported by the
-  'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
-  and STM32F746 (Cortex-M7) are supported.
-
-
-Configuration
--------------
-
-  A generic configuration is provided for STM32 family, and can be used as the
-  default by
-	make stm32_defconfig
-
-Layout
-------
-
-  All the files for multiple machine families are located in the platform code
-  contained in arch/arm/mach-stm32
-
-  There is a generic board board-dt.c in the mach folder which support
-  Flattened Device Tree, which means, it works with any compatible board with
-  Device Trees.
-
-
-Document Author
----------------
-
-  Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst
new file mode 100644
index 000000000000..18feda97f483
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f429-overview.rst
@@ -0,0 +1,26 @@
+STM32F429 Overview
+==================
+
+Introduction
+------------
+
+The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+It features:
+
+- ARM Cortex-M4 up to 180MHz with FPU
+- 2MB internal Flash Memory
+- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+- LCD controller & Camera interface
+- Cryptographic processor
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F429_).
+
+.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+:Authors:
+
+Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f429-overview.txt b/Documentation/arm/stm32/stm32f429-overview.txt
deleted file mode 100644
index 5206822bd8ef..000000000000
--- a/Documentation/arm/stm32/stm32f429-overview.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-			STM32F429 Overview
-			==================
-
-  Introduction
-  ------------
-	The STM32F429 is a Cortex-M4 MCU aimed at various applications.
-	It features:
-	- ARM Cortex-M4 up to 180MHz with FPU
-	- 2MB internal Flash Memory
-	- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
-	- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
-	- LCD controller & Camera interface
-	- Cryptographic processor
-
-  Resources
-  ---------
-	Datasheet and reference manual are publicly available on ST website:
-	- http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
-
-  Document Author
-  ---------------
-	Maxime Coquelin <mcoquelin.stm32@gmail.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst
new file mode 100644
index 000000000000..b5f4b6ce7656
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f746-overview.rst
@@ -0,0 +1,33 @@
+STM32F746 Overview
+==================
+
+Introduction
+------------
+
+The STM32F746 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F746_).
+
+.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32f746-overview.txt b/Documentation/arm/stm32/stm32f746-overview.txt
deleted file mode 100644
index cffd2b1ccd6f..000000000000
--- a/Documentation/arm/stm32/stm32f746-overview.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-			STM32F746 Overview
-			==================
-
-  Introduction
-  ------------
-	The STM32F746 is a Cortex-M7 MCU aimed at various applications.
-	It features:
-	- Cortex-M7 core running up to @216MHz
-	- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
-	- FMC controller to connect SDRAM, NOR and NAND memories
-	- Dual mode QSPI
-	- SD/MMC/SDIO support
-	- Ethernet controller
-	- USB OTFG FS & HS controllers
-	- I2C, SPI, CAN busses support
-	- Several 16 & 32 bits general purpose timers
-	- Serial Audio interface
-	- LCD controller
-	- HDMI-CEC
-	- SPDIFRX
-
-  Resources
-  ---------
-	Datasheet and reference manual are publicly available on ST website:
-	- http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html
-
-  Document Author
-  ---------------
-	Alexandre Torgue <alexandre.torgue@st.com>
-
-
-
-
-
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
new file mode 100644
index 000000000000..228656ced2fe
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f769-overview.rst
@@ -0,0 +1,35 @@
+STM32F769 Overview
+==================
+
+Introduction
+------------
+
+The STM32F769 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support*2
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C*4, SPI*6, CAN*3 busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface*2
+- LCD controller
+- HDMI-CEC
+- DSI
+- SPDIFRX
+- MDIO salave interface
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F769_).
+
+.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst
new file mode 100644
index 000000000000..3458dc00095d
--- /dev/null
+++ b/Documentation/arm/stm32/stm32h743-overview.rst
@@ -0,0 +1,34 @@
+STM32H743 Overview
+==================
+
+Introduction
+------------
+
+The STM32H743 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @400MHz
+- 2MB internal flash, 1MBytes internal RAM
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C, SPI, CAN busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface
+- LCD controller
+- HDMI-CEC
+- SPDIFRX
+- DFSDM
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32H743_).
+
+.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32h743-overview.txt b/Documentation/arm/stm32/stm32h743-overview.txt
deleted file mode 100644
index 3031cbae31a5..000000000000
--- a/Documentation/arm/stm32/stm32h743-overview.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-			STM32H743 Overview
-			==================
-
-  Introduction
-  ------------
-	The STM32H743 is a Cortex-M7 MCU aimed at various applications.
-	It features:
-	- Cortex-M7 core running up to @400MHz
-	- 2MB internal flash, 1MBytes internal RAM
-	- FMC controller to connect SDRAM, NOR and NAND memories
-	- Dual mode QSPI
-	- SD/MMC/SDIO support
-	- Ethernet controller
-	- USB OTFG FS & HS controllers
-	- I2C, SPI, CAN busses support
-	- Several 16 & 32 bits general purpose timers
-	- Serial Audio interface
-	- LCD controller
-	- HDMI-CEC
-	- SPDIFRX
-	- DFSDM
-
-  Resources
-  ---------
-	Datasheet and reference manual are publicly available on ST website:
-	- http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
-
-  Document Author
-  ---------------
-	Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst
new file mode 100644
index 000000000000..62e176d47ca7
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.rst
@@ -0,0 +1,19 @@
+STM32MP157 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP157 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Dual core Cortex-A7 application core
+- 2D/3D image composition with GPU
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+:Authors:
+
+- Ludovic Barre <ludovic.barre@st.com>
+- Gerald Baeza <gerald.baeza@st.com>
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 8b0328ff951d..29e1dc5d506d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -199,6 +199,7 @@ described below.
 			    "actions,s500-smp"
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
+			    "allwinner,sun9i-a80-smp"
 			    "amlogic,meson8-smp"
 			    "amlogic,meson8b-smp"
 			    "arm,realview-smp"
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
index 763695db2bd9..f301e636fd52 100644
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -13,6 +13,13 @@ Required properties:
 Optional properties:
 - sram:	Phandle to the ocmcram node
 
+am335x and am437x only:
+- pm-sram: Phandles to ocmcram nodes to be used for power management.
+	   First should be type 'protect-exec' for the driver to use to copy
+	   and run PM functions, second should be regular pool to be used for
+	   data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+	   for more details.
+
 Examples:
 
 - For an OMAP5 SMP system:
@@ -36,3 +43,12 @@ mpu {
     compatible = "ti,omap3-mpu";
     ti,hwmods = "mpu";
 };
+
+- For an AM335x system:
+
+mpu {
+	compatible = "ti,omap3-mpu";
+	ti,hwmods = "mpu";
+	pm-sram = <&pm_sram_code
+		   &pm_sram_data>;
+};
diff --git a/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt b/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
new file mode 100644
index 000000000000..082e6a9382d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/smp-sram.txt
@@ -0,0 +1,44 @@
+Allwinner SRAM for smp bringup:
+------------------------------------------------
+
+Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
+primary core (cpu0). Once the core gets powered up it checks if a magic
+value is set at a specific location. If it is then the BROM will jump
+to the software entry address, instead of executing a standard boot.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Note that this is separate from the Allwinner SRAM controller found in
+../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to
+any device.
+
+Also there are no "secure-only" properties. The implementation should
+check if this SRAM is usable first.
+
+Required sub-node properties:
+- compatible : depending on the SoC this should be one of:
+		"allwinner,sun9i-a80-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+	sram_b: sram@20000 {
+		/* 256 KiB secure SRAM at 0x20000 */
+		compatible = "mmio-sram";
+		reg = <0x00020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00020000 0x40000>;
+
+		smp-sram@1000 {
+			/*
+			 * This is checked by BROM to determine if
+			 * cpu0 should jump to SMP entry vector
+			 */
+			compatible = "allwinner,sun9i-a80-smp-sram";
+			reg = <0x1000 0x8>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
deleted file mode 100644
index d4ee4da58463..000000000000
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-PXA3xx NAND DT bindings
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-			marvell,pxa3xx-nand
-			marvell,armada370-nand
-			marvell,armada-8k-nand
- - reg: 		The register base for the controller
- - interrupts:		The interrupt to map
- - #address-cells:	Set to <1> if the node includes partitions
- - marvell,system-controller: Set to retrieve the syscon node that handles
-			NAND controller related registers (only required
-			with marvell,armada-8k-nand compatible).
-
-Optional properties:
-
- - dmas:			dma data channel, see dma.txt binding doc
- - marvell,nand-enable-arbiter:	Set to enable the bus arbiter
- - marvell,nand-keep-config:	Set to keep the NAND controller config as set
-				by the bootloader
- - num-cs:			Number of chipselect lines to use
- - nand-on-flash-bbt: 		boolean to enable on flash bbt option if
-				not present false
- - nand-ecc-strength:           number of bits to correct per ECC step
- - nand-ecc-step-size:          number of data bytes covered by a single ECC step
-
-The following ECC strength and step size are currently supported:
-
- - nand-ecc-strength = <1>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <4>, nand-ecc-step-size = <512>
- - nand-ecc-strength = <8>, nand-ecc-step-size = <512>
-
-Example:
-
-	nand0: nand@43100000 {
-		compatible = "marvell,pxa3xx-nand";
-		reg = <0x43100000 90>;
-		interrupts = <45>;
-		dmas = <&pdma 97 0>;
-		dma-names = "data";
-		#address-cells = <1>;
-
-		marvell,nand-enable-arbiter;
-		marvell,nand-keep-config;
-		num-cs = <1>;
-
-		/* partitions (optional) */
-	};
-
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 8690f10426a3..ab399e559257 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -17,7 +17,9 @@ Required properties:
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
+      - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
+      - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a8014f3ab8ba..294a0dae106a 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,7 +26,9 @@ Required properties:
 		  - "renesas,r8a7794-rst" (R-Car E2)
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
+		  - "renesas,r8a77965-rst" (R-Car M3-N)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
+		  - "renesas,r8a77980-rst" (R-Car V3H)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.