Merge branch 'irqchip/stacked-omap' into irqchip/core

3 files changed, 38 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c97484b73e72..1e0d21201d3a 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -56,11 +56,6 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
-- arm,routable-irqs : Total number of gic irq inputs which are not directly
-		  connected from the peripherals, but are routed dynamically
-		  by a crossbar/multiplexer preceding the GIC. The GIC irq
-		  input line is assigned dynamically when the corresponding
-		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -68,7 +63,6 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
-		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 4139db353d0a..a9b28d74d902 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -9,7 +9,9 @@ inputs.
 Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
-- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- interrupt-parent: the interrupt controller this block is connected to.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
 - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
@@ -27,13 +29,13 @@ Optional properties:
   when the interrupt controller irq is unused (when not provided, default is 0)
 
 Examples:
-		crossbar_mpu: @4a020000 {
+		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
 			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
 			ti,irqs-skip = <10 133 139 140>;
 		};
 
@@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
 
 An interrupt consumer on an SoC using crossbar will use:
 	interrupts = <GIC_SPI request_number interrupt_level>
-When the request number is between 0 to that described by
-"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
-request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
-quirky hardware mapping direct to GIC.
 
 Example:
 	device_x@0x4a023000 {
@@ -55,9 +53,3 @@ Example:
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		...
 	};
-
-	device_y@0x4a033000 {
-		/* Direct mapped GIC SPI 1 used */
-		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
new file mode 100644
index 000000000000..43effa0a4fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -0,0 +1,33 @@
+TI OMAP4 Wake-up Generator
+
+All TI OMAP4/5 (and their derivatives) an interrupt controller that
+routes interrupts to the GIC, and also serves as a wakeup source. It
+is also referred to as "WUGEN-MPU", hence the name of the binding.
+
+Reguired properties:
+
+- compatible : should contain at least "ti,omap4-wugen-mpu" or
+  "ti,omap5-wugen-mpu"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 3.
+- interrupt-parent : a phandle to the GIC these interrupts are routed
+  to.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+  interrupt specifier must be that of the GIC.
+- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
+  are explicitly forbiden.
+
+Example:
+
+       wakeupgen: interrupt-controller@48281000 {
+               compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+               interrupt-controller;
+               #interrupt-cells = <3>;
+               reg = <0x48281000 0x1000>;
+               interrupt-parent = <&gic>;
+       };