Merge tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.9-rc1

Adds support for one more panel to the simple-panel driver, fixes up a
couple of delays and flags for existing panels and finally adds a new
driver for the DSI panel found on Nexus 7 devices.

* tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel
  dt-bindings: Add JDI LT070ME05000 panel bindings
  drm/panel: simple: Fix bus_format for the Olimex LCD-OLinuXino-4.3TS
  drm/panel: simple-panel: Add delay timings for Starry KR122EA0SRA
  drm/panel: simple: Fix bus flags for Ortustech com43h4m85ulc
  drm/panel: simple: Add Innolux G101ICE-L01 panel
  drm/panel: simple: Add delay timing for Sharp LQ123P1JX31
  drm/dsi: Implement DCS set/get display brightness
  drm/dsi: Order DCS helpers by command code

2 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt
new file mode 100644
index 000000000000..9e7590465227
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,g101ice-l01.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+
+Required properties:
+- compatible: should be "innolux,g101ice-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 000000000000..4989c91d505f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,31 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+  IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+  LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+  Power IC supply enable, High active
+
+Example:
+
+	dsi0: qcom,mdss_dsi@4700000 {
+		panel@0 {
+			compatible = "jdi,lt070me05000";
+			reg = <0>;
+
+			vddp-supply = <&pm8921_l17>;
+			iovcc-supply = <&pm8921_lvs7>;
+
+			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+		};
+	};