KVM: x86: drop legacy device assignment

Legacy device assignment has been deprecated since 4.2 (released
1.5 years ago).  VFIO is better and everyone should have switched to it.
If they haven't, this should convince them. :)

Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 204 deletions

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 753e88e5eb2a..1a184843bf9c 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1326,130 +1326,6 @@ The flags bitmap is defined as:
    /* the host supports the ePAPR idle hcall
    #define KVM_PPC_PVINFO_FLAGS_EV_IDLE   (1<<0)
 
-4.48 KVM_ASSIGN_PCI_DEVICE (deprecated)
-
-Capability: none
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_pci_dev (in)
-Returns: 0 on success, -1 on error
-
-Assigns a host PCI device to the VM.
-
-struct kvm_assigned_pci_dev {
-	__u32 assigned_dev_id;
-	__u32 busnr;
-	__u32 devfn;
-	__u32 flags;
-	__u32 segnr;
-	union {
-		__u32 reserved[11];
-	};
-};
-
-The PCI device is specified by the triple segnr, busnr, and devfn.
-Identification in succeeding service requests is done via assigned_dev_id. The
-following flags are specified:
-
-/* Depends on KVM_CAP_IOMMU */
-#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
-/* The following two depend on KVM_CAP_PCI_2_3 */
-#define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
-#define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
-
-If KVM_DEV_ASSIGN_PCI_2_3 is set, the kernel will manage legacy INTx interrupts
-via the PCI-2.3-compliant device-level mask, thus enable IRQ sharing with other
-assigned devices or host devices. KVM_DEV_ASSIGN_MASK_INTX specifies the
-guest's view on the INTx mask, see KVM_ASSIGN_SET_INTX_MASK for details.
-
-The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
-isolation of the device.  Usages not specifying this flag are deprecated.
-
-Only PCI header type 0 devices with PCI BAR resources are supported by
-device assignment.  The user requesting this ioctl must have read/write
-access to the PCI sysfs resource files associated with the device.
-
-Errors:
-  ENOTTY: kernel does not support this ioctl
-
-  Other error conditions may be defined by individual device types or
-  have their standard meanings.
-
-
-4.49 KVM_DEASSIGN_PCI_DEVICE (deprecated)
-
-Capability: none
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_pci_dev (in)
-Returns: 0 on success, -1 on error
-
-Ends PCI device assignment, releasing all associated resources.
-
-See KVM_ASSIGN_PCI_DEVICE for the data structure. Only assigned_dev_id is
-used in kvm_assigned_pci_dev to identify the device.
-
-Errors:
-  ENOTTY: kernel does not support this ioctl
-
-  Other error conditions may be defined by individual device types or
-  have their standard meanings.
-
-4.50 KVM_ASSIGN_DEV_IRQ (deprecated)
-
-Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_irq (in)
-Returns: 0 on success, -1 on error
-
-Assigns an IRQ to a passed-through device.
-
-struct kvm_assigned_irq {
-	__u32 assigned_dev_id;
-	__u32 host_irq; /* ignored (legacy field) */
-	__u32 guest_irq;
-	__u32 flags;
-	union {
-		__u32 reserved[12];
-	};
-};
-
-The following flags are defined:
-
-#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
-#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
-#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
-
-#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
-#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
-#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
-
-It is not valid to specify multiple types per host or guest IRQ. However, the
-IRQ type of host and guest can differ or can even be null.
-
-Errors:
-  ENOTTY: kernel does not support this ioctl
-
-  Other error conditions may be defined by individual device types or
-  have their standard meanings.
-
-
-4.51 KVM_DEASSIGN_DEV_IRQ (deprecated)
-
-Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_irq (in)
-Returns: 0 on success, -1 on error
-
-Ends an IRQ assignment to a passed-through device.
-
-See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
-by assigned_dev_id, flags must correspond to the IRQ type specified on
-KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
-
-
 4.52 KVM_SET_GSI_ROUTING
 
 Capability: KVM_CAP_IRQ_ROUTING
@@ -1536,52 +1412,6 @@ struct kvm_irq_routing_hv_sint {
 	__u32 sint;
 };
 
-4.53 KVM_ASSIGN_SET_MSIX_NR (deprecated)
-
-Capability: none
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_msix_nr (in)
-Returns: 0 on success, -1 on error
-
-Set the number of MSI-X interrupts for an assigned device. The number is
-reset again by terminating the MSI-X assignment of the device via
-KVM_DEASSIGN_DEV_IRQ. Calling this service more than once at any earlier
-point will fail.
-
-struct kvm_assigned_msix_nr {
-	__u32 assigned_dev_id;
-	__u16 entry_nr;
-	__u16 padding;
-};
-
-#define KVM_MAX_MSIX_PER_DEV		256
-
-
-4.54 KVM_ASSIGN_SET_MSIX_ENTRY (deprecated)
-
-Capability: none
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_msix_entry (in)
-Returns: 0 on success, -1 on error
-
-Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
-the GSI vector to zero means disabling the interrupt.
-
-struct kvm_assigned_msix_entry {
-	__u32 assigned_dev_id;
-	__u32 gsi;
-	__u16 entry; /* The index of entry in the MSI-X table */
-	__u16 padding[3];
-};
-
-Errors:
-  ENOTTY: kernel does not support this ioctl
-
-  Other error conditions may be defined by individual device types or
-  have their standard meanings.
-
 
 4.55 KVM_SET_TSC_KHZ
 
@@ -1733,40 +1563,6 @@ should skip processing the bitmap and just invalidate everything.  It must
 be set to the number of set bits in the bitmap.
 
 
-4.61 KVM_ASSIGN_SET_INTX_MASK (deprecated)
-
-Capability: KVM_CAP_PCI_2_3
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_assigned_pci_dev (in)
-Returns: 0 on success, -1 on error
-
-Allows userspace to mask PCI INTx interrupts from the assigned device.  The
-kernel will not deliver INTx interrupts to the guest between setting and
-clearing of KVM_ASSIGN_SET_INTX_MASK via this interface.  This enables use of
-and emulation of PCI 2.3 INTx disable command register behavior.
-
-This may be used for both PCI 2.3 devices supporting INTx disable natively and
-older devices lacking this support. Userspace is responsible for emulating the
-read value of the INTx disable bit in the guest visible PCI command register.
-When modifying the INTx disable state, userspace should precede updating the
-physical device command register by calling this ioctl to inform the kernel of
-the new intended INTx mask state.
-
-Note that the kernel uses the device INTx disable bit to internally manage the
-device interrupt state for PCI 2.3 devices.  Reads of this register may
-therefore not match the expected value.  Writes should always use the guest
-intended INTx disable value rather than attempting to read-copy-update the
-current physical device state.  Races between user and kernel updates to the
-INTx disable bit are handled lazily in the kernel.  It's possible the device
-may generate unintended interrupts, but they will not be injected into the
-guest.
-
-See KVM_ASSIGN_DEV_IRQ for the data structure.  The target device is specified
-by assigned_dev_id.  In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is
-evaluated.
-
-
 4.62 KVM_CREATE_SPAPR_TCE
 
 Capability: KVM_CAP_SPAPR_TCE