docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 41 deletions

diff --git a/Documentation/hwmon/tmp108 b/Documentation/hwmon/tmp108
deleted file mode 100644
index 7e08b7ef1e2f..000000000000
--- a/Documentation/hwmon/tmp108
+++ /dev/null
@@ -1,41 +0,0 @@
-Kernel driver tmp108
-====================
-
-Supported chips:
-
-  * Texas Instruments TMP108
-
-    Prefix: 'tmp108'
-
-    Addresses scanned: none
-
-    Datasheet: http://www.ti.com/product/tmp108
-
-Author:
-
-	John Muir <john@jmuir.com>
-
-Description
------------
-
-The Texas Instruments TMP108 implements one temperature sensor. An alert pin
-can be set when temperatures exceed minimum or maximum values plus or minus a
-hysteresis value. (This driver does not support interrupts for the alert pin,
-and the device runs in comparator mode.)
-
-The sensor is accurate to 0.75C over the range of -25 to +85 C, and to 1.0
-degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
-operating temperature has a minimum of -55 C and a maximum of +150 C.
-Hysteresis values can be set to 0, 1, 2, or 4C.
-
-The TMP108 has a programmable update rate that can select between 8, 4, 1, and
-0.5 Hz.
-
-By default the TMP108 reads the temperature continuously. To conserve power,
-the TMP108 has a one-shot mode where the device is normally shut-down. When a
-one shot is requested the temperature is read, the result can be retrieved,
-and then the device is shut down automatically. (This driver only supports
-continuous mode.)
-
-The driver provides the common sysfs-interface for temperatures (see
-Documentation/hwmon/sysfs-interface under Temperatures).