Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

5 files changed, 334 insertions, 1 deletions

diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
index e0b58c392e4f..eaaaafc21134 100644
--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@@ -342,7 +342,8 @@ LED
 MDIO
   devm_mdiobus_alloc()
   devm_mdiobus_alloc_size()
-  devm_mdiobus_free()
+  devm_mdiobus_register()
+  devm_of_mdiobus_register()
 
 MEM
   devm_free_pages()
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 3eb0085d5e42..902b93b17235 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -96,6 +96,7 @@ available subsections can be seen below.
    phy/index
    pti_intel_mid
    pwm
+   pldmfw/index
    rfkill
    serial/index
    sm501
diff --git a/Documentation/driver-api/pldmfw/driver-ops.rst b/Documentation/driver-api/pldmfw/driver-ops.rst
new file mode 100644
index 000000000000..f0654783d3b3
--- /dev/null
+++ b/Documentation/driver-api/pldmfw/driver-ops.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=========================
+Driver-specific callbacks
+=========================
+
+The ``pldmfw`` module relies on the device driver for implementing device
+specific behavior using the following operations.
+
+``.match_record``
+-----------------
+
+The ``.match_record`` operation is used to determine whether a given PLDM
+record matches the device being updated. This requires comparing the record
+descriptors in the record with information from the device. Many record
+descriptors are defined by the PLDM standard, but it is also allowed for
+devices to implement their own descriptors.
+
+The ``.match_record`` operation should return true if a given record matches
+the device.
+
+``.send_package_data``
+----------------------
+
+The ``.send_package_data`` operation is used to send the device-specific
+package data in a record to the device firmware. If the matching record
+provides package data, ``pldmfw`` will call the ``.send_package_data``
+function with a pointer to the package data and with the package data
+length. The device driver should send this data to firmware.
+
+``.send_component_table``
+-------------------------
+
+The ``.send_component_table`` operation is used to forward component
+information to the device. It is called once for each applicable component,
+that is, for each component indicated by the matching record. The
+device driver should send the component information to the device firmware,
+and wait for a response. The provided transfer flag indicates whether this
+is the first, last, or a middle component, and is expected to be forwarded
+to firmware as part of the component table information. The driver should an
+error in the case when the firmware indicates that the component cannot be
+updated, or return zero if the component can be updated.
+
+``.flash_component``
+--------------------
+
+The ``.flash_component`` operation is used to inform the device driver to
+flash a given component. The driver must perform any steps necessary to send
+the component data to the device.
+
+``.finalize_update``
+--------------------
+
+The ``.finalize_update`` operation is used by the ``pldmfw`` library in
+order to allow the device driver to perform any remaining device specific
+logic needed to finish the update.
diff --git a/Documentation/driver-api/pldmfw/file-format.rst b/Documentation/driver-api/pldmfw/file-format.rst
new file mode 100644
index 000000000000..b7a9cebe09c6
--- /dev/null
+++ b/Documentation/driver-api/pldmfw/file-format.rst
@@ -0,0 +1,203 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+==================================
+PLDM Firmware file format overview
+==================================
+
+A PLDM firmware package is a binary file which contains a header that
+describes the contents of the firmware package. This includes an initial
+package header, one or more firmware records, and one or more components
+describing the actual flash contents to program.
+
+This diagram provides an overview of the file format::
+
+        overall file layout
+      +----------------------+
+      |                      |
+      |  Package Header      |
+      |                      |
+      +----------------------+
+      |                      |
+      |  Device Records      |
+      |                      |
+      +----------------------+
+      |                      |
+      |  Component Info      |
+      |                      |
+      +----------------------+
+      |                      |
+      |  Package Header CRC  |
+      |                      |
+      +----------------------+
+      |                      |
+      |  Component Image 1   |
+      |                      |
+      +----------------------+
+      |                      |
+      |  Component Image 2   |
+      |                      |
+      +----------------------+
+      |                      |
+      |         ...          |
+      |                      |
+      +----------------------+
+      |                      |
+      |  Component Image N   |
+      |                      |
+      +----------------------+
+
+Package Header
+==============
+
+The package header begins with the UUID of the PLDM file format, and
+contains information about the version of the format that the file uses. It
+also includes the total header size, a release date, the size of the
+component bitmap, and an overall package version.
+
+The following diagram provides an overview of the package header::
+
+             header layout
+      +-------------------------+
+      | PLDM UUID               |
+      +-------------------------+
+      | Format Revision         |
+      +-------------------------+
+      | Header Size             |
+      +-------------------------+
+      | Release Date            |
+      +-------------------------+
+      | Component Bitmap Length |
+      +-------------------------+
+      | Package Version Info    |
+      +-------------------------+
+
+Device Records
+==============
+
+The device firmware records area starts with a count indicating the total
+number of records in the file, followed by each record. A single device
+record describes what device matches this record. All valid PLDM firmware
+files must contain at least one record, but optionally may contain more than
+one record if they support multiple devices.
+
+Each record will identify the device it supports via TLVs that describe the
+device, such as the PCI device and vendor information. It will also indicate
+which set of components that are used by this device. It is possible that
+only subset of provided components will be used by a given record. A record
+may also optionally contain device-specific package data that will be used
+by the device firmware during the update process.
+
+The following diagram provides an overview of the device record area::
+
+         area layout
+      +---------------+
+      |               |
+      |  Record Count |
+      |               |
+      +---------------+
+      |               |
+      |  Record 1     |
+      |               |
+      +---------------+
+      |               |
+      |  Record 2     |
+      |               |
+      +---------------+
+      |               |
+      |      ...      |
+      |               |
+      +---------------+
+      |               |
+      |  Record N     |
+      |               |
+      +---------------+
+
+           record layout
+      +-----------------------+
+      | Record Length         |
+      +-----------------------+
+      | Descriptor Count      |
+      +-----------------------+
+      | Option Flags          |
+      +-----------------------+
+      | Version Settings      |
+      +-----------------------+
+      | Package Data Length   |
+      +-----------------------+
+      | Applicable Components |
+      +-----------------------+
+      | Version String        |
+      +-----------------------+
+      | Descriptor TLVs       |
+      +-----------------------+
+      | Package Data          |
+      +-----------------------+
+
+Component Info
+==============
+
+The component information area begins with a count of the number of
+components. Following this count is a description for each component. The
+component information points to the location in the file where the component
+data is stored, and includes version data used to identify the version of
+the component.
+
+The following diagram provides an overview of the component area::
+
+         area layout
+      +-----------------+
+      |                 |
+      | Component Count |
+      |                 |
+      +-----------------+
+      |                 |
+      | Component 1     |
+      |                 |
+      +-----------------+
+      |                 |
+      | Component 2     |
+      |                 |
+      +-----------------+
+      |                 |
+      |     ...         |
+      |                 |
+      +-----------------+
+      |                 |
+      | Component N     |
+      |                 |
+      +-----------------+
+
+           component layout
+      +------------------------+
+      | Classification         |
+      +------------------------+
+      | Component Identifier   |
+      +------------------------+
+      | Comparison Stamp       |
+      +------------------------+
+      | Component Options      |
+      +------------------------+
+      | Activation Method      |
+      +------------------------+
+      | Location Offset        |
+      +------------------------+
+      | Component Size         |
+      +------------------------+
+      | Component Version Info |
+      +------------------------+
+      | Package Data           |
+      +------------------------+
+
+
+Package Header CRC
+==================
+
+Following the component information is a short 4-byte CRC calculated over
+the contents of all of the header information.
+
+Component Images
+================
+
+The component images follow the package header information in the PLDM
+firmware file. Each of these is simply a binary chunk with its start and
+size defined by the matching component structure in the component info area.
diff --git a/Documentation/driver-api/pldmfw/index.rst b/Documentation/driver-api/pldmfw/index.rst
new file mode 100644
index 000000000000..ad2c33ece30f
--- /dev/null
+++ b/Documentation/driver-api/pldmfw/index.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+==================================
+PLDM Firmware Flash Update Library
+==================================
+
+``pldmfw`` implements functionality for updating the flash on a device using
+the PLDM for Firmware Update standard
+<https://www.dmtf.org/documents/pmci/pldm-firmware-update-specification-100>.
+
+.. toctree::
+   :maxdepth: 1
+
+   file-format
+   driver-ops
+
+==================================
+Overview of the ``pldmfw`` library
+==================================
+
+The ``pldmfw`` library is intended to be used by device drivers for
+implementing device flash update based on firmware files following the PLDM
+firwmare file format.
+
+It is implemented using an ops table that allows device drivers to provide
+the underlying device specific functionality.
+
+``pldmfw`` implements logic to parse the packed binary format of the PLDM
+firmware file into data structures, and then uses the provided function
+operations to determine if the firmware file is a match for the device. If
+so, it sends the record and component data to the firmware using the device
+specific implementations provided by device drivers. Once the device
+firmware indicates that the update may be performed, the firmware data is
+sent to the device for programming.
+
+Parsing the PLDM file
+=====================
+
+The PLDM file format uses packed binary data, with most multi-byte fields
+stored in the Little Endian format. Several pieces of data are variable
+length, including version strings and the number of records and components.
+Due to this, it is not straight forward to index the record, record
+descriptors, or components.
+
+To avoid proliferating access to the packed binary data, the ``pldmfw``
+library parses and extracts this data into simpler structures for ease of
+access.
+
+In order to safely process the firmware file, care is taken to avoid
+unaligned access of multi-byte fields, and to properly convert from Little
+Endian to CPU host format. Additionally the records, descriptors, and
+components are stored in linked lists.
+
+Performing a flash update
+=========================
+
+To perform a flash update, the ``pldmfw`` module performs the following
+steps
+
+1. Parse the firmware file for record and component information
+2. Scan through the records and determine if the device matches any record
+   in the file. The first matched record will be used.
+3. If the matching record provides package data, send this package data to
+   the device.
+4. For each component that the record indicates, send the component data to
+   the device. For each component, the firmware may respond with an
+   indication of whether the update is suitable or not. If any component is
+   not suitable, the update is canceled.
+5. For each component, send the binary data to the device firmware for
+   updating.
+6. After all components are programmed, perform any final device-specific
+   actions to finalize the update.