writing_usb_driver.rst: Enrich its ReST representation

The pandoc conversion is not perfect. Do handwork in order to:

- add a title to this chapter;
- adjust function and struct references;
- use monospaced fonts for C code names;
- some other minor adjustments to make it better to read in
  text mode and in html.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

1 files changed, 82 insertions, 100 deletions

diff --git a/Documentation/driver-api/usb/writing_usb_driver.rst b/Documentation/driver-api/usb/writing_usb_driver.rst
index c18dbd74152b..69f077dcdb78 100644
--- a/Documentation/driver-api/usb/writing_usb_driver.rst
+++ b/Documentation/driver-api/usb/writing_usb_driver.rst
@@ -1,3 +1,5 @@
+.. _writing-usb-driver:
+
 ==========================
 Writing USB Device Drivers
 ==========================
@@ -48,25 +50,23 @@ The first thing a Linux USB driver needs to do is register itself with
 the Linux USB subsystem, giving it some information about which devices
 the driver supports and which functions to call when a device supported
 by the driver is inserted or removed from the system. All of this
-information is passed to the USB subsystem in the usb_driver structure.
-The skeleton driver declares a usb_driver as:
-
-::
+information is passed to the USB subsystem in the :c:type:`usb_driver`
+structure. The skeleton driver declares a :c:type:`usb_driver` as::
 
     static struct usb_driver skel_driver = {
-            .name        = "skeleton",
-            .probe       = skel_probe,
-            .disconnect  = skel_disconnect,
-            .fops        = &skel_fops,
-            .minor       = USB_SKEL_MINOR_BASE,
-            .id_table    = skel_table,
+	    .name        = "skeleton",
+	    .probe       = skel_probe,
+	    .disconnect  = skel_disconnect,
+	    .fops        = &skel_fops,
+	    .minor       = USB_SKEL_MINOR_BASE,
+	    .id_table    = skel_table,
     };
 
 
 The variable name is a string that describes the driver. It is used in
 informational messages printed to the system log. The probe and
 disconnect function pointers are called when a device that matches the
-information provided in the id_table variable is either seen or
+information provided in the ``id_table`` variable is either seen or
 removed.
 
 The fops and minor variables are optional. Most USB drivers hook into
@@ -76,78 +76,70 @@ subsystem, and any user-space interactions are provided through that
 interface. But for drivers that do not have a matching kernel subsystem,
 such as MP3 players or scanners, a method of interacting with user space
 is needed. The USB subsystem provides a way to register a minor device
-number and a set of file_operations function pointers that enable this
-user-space interaction. The skeleton driver needs this kind of
+number and a set of :c:type:`file_operations` function pointers that enable
+this user-space interaction. The skeleton driver needs this kind of
 interface, so it provides a minor starting number and a pointer to its
-file_operations functions.
-
-The USB driver is then registered with a call to usb_register, usually
-in the driver's init function, as shown here:
+:c:type:`file_operations` functions.
 
-::
+The USB driver is then registered with a call to :c:func:`usb_register`,
+usually in the driver's init function, as shown here::
 
     static int __init usb_skel_init(void)
     {
-            int result;
+	    int result;
 
-            /* register this driver with the USB subsystem */
-            result = usb_register(&skel_driver);
-            if (result < 0) {
-                    err("usb_register failed for the "__FILE__ "driver."
-                        "Error number %d", result);
-                    return -1;
-            }
+	    /* register this driver with the USB subsystem */
+	    result = usb_register(&skel_driver);
+	    if (result < 0) {
+		    err("usb_register failed for the "__FILE__ "driver."
+			"Error number %d", result);
+		    return -1;
+	    }
 
-            return 0;
+	    return 0;
     }
     module_init(usb_skel_init);
 
 
 When the driver is unloaded from the system, it needs to deregister
-itself with the USB subsystem. This is done with the usb_deregister
-function:
-
-::
+itself with the USB subsystem. This is done with the :c:func:`usb_deregister`
+function::
 
     static void __exit usb_skel_exit(void)
     {
-            /* deregister this driver with the USB subsystem */
-            usb_deregister(&skel_driver);
+	    /* deregister this driver with the USB subsystem */
+	    usb_deregister(&skel_driver);
     }
     module_exit(usb_skel_exit);
 
 
 To enable the linux-hotplug system to load the driver automatically when
-the device is plugged in, you need to create a MODULE_DEVICE_TABLE.
+the device is plugged in, you need to create a ``MODULE_DEVICE_TABLE``.
 The following code tells the hotplug scripts that this module supports a
-single device with a specific vendor and product ID:
-
-::
+single device with a specific vendor and product ID::
 
     /* table of devices that work with this driver */
     static struct usb_device_id skel_table [] = {
-            { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
-            { }                      /* Terminating entry */
+	    { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
+	    { }                      /* Terminating entry */
     };
     MODULE_DEVICE_TABLE (usb, skel_table);
 
 
-There are other macros that can be used in describing a usb_device_id
-for drivers that support a whole class of USB drivers. See usb.h for
-more information on this.
+There are other macros that can be used in describing a struct
+:c:type:`usb_device_id` for drivers that support a whole class of USB
+drivers. See :ref:`usb.h <usb_header>` for more information on this.
 
 Device operation
 ================
 
 When a device is plugged into the USB bus that matches the device ID
 pattern that your driver registered with the USB core, the probe
-function is called. The usb_device structure, interface number and the
-interface ID are passed to the function:
-
-::
+function is called. The :c:type:`usb_device` structure, interface number and
+the interface ID are passed to the function::
 
     static int skel_probe(struct usb_interface *interface,
-        const struct usb_device_id *id)
+	const struct usb_device_id *id)
 
 
 The driver now needs to verify that this device is actually one that it
@@ -166,16 +158,14 @@ any private data that has been allocated at this time and to shut down
 any pending urbs that are in the USB system.
 
 Now that the device is plugged into the system and the driver is bound
-to the device, any of the functions in the file_operations structure
+to the device, any of the functions in the :c:type:`file_operations` structure
 that were passed to the USB subsystem will be called from a user program
 trying to talk to the device. The first function called will be open, as
 the program tries to open the device for I/O. We increment our private
 usage count and save a pointer to our internal structure in the file
 structure. This is done so that future calls to file operations will
 enable the driver to determine which device the user is addressing. All
-of this is done with the following code:
-
-::
+of this is done with the following code::
 
     /* increment our usage count for the module */
     ++skel->open_count;
@@ -185,16 +175,14 @@ of this is done with the following code:
 
 
 After the open function is called, the read and write functions are
-called to receive and send data to the device. In the skel_write
+called to receive and send data to the device. In the ``skel_write``
 function, we receive a pointer to some data that the user wants to send
 to the device and the size of the data. The function determines how much
 data it can send to the device based on the size of the write urb it has
 created (this size depends on the size of the bulk out end point that
 the device has). Then it copies the data from user space to kernel
 space, points the urb to the data and submits the urb to the USB
-subsystem. This can be seen in the following code:
-
-::
+subsystem. This can be seen in the following code::
 
     /* we can only write as much as 1 urb will hold */
     bytes_written = (count > skel->bulk_out_size) ? skel->bulk_out_size : count;
@@ -204,68 +192,64 @@ subsystem. This can be seen in the following code:
 
     /* set up our urb */
     usb_fill_bulk_urb(skel->write_urb,
-                      skel->dev,
-                      usb_sndbulkpipe(skel->dev, skel->bulk_out_endpointAddr),
-                      skel->write_urb->transfer_buffer,
-                      bytes_written,
-                      skel_write_bulk_callback,
-                      skel);
+		      skel->dev,
+		      usb_sndbulkpipe(skel->dev, skel->bulk_out_endpointAddr),
+		      skel->write_urb->transfer_buffer,
+		      bytes_written,
+		      skel_write_bulk_callback,
+		      skel);
 
     /* send the data out the bulk port */
     result = usb_submit_urb(skel->write_urb);
     if (result) {
-            err("Failed submitting write urb, error %d", result);
+	    err("Failed submitting write urb, error %d", result);
     }
 
 
 When the write urb is filled up with the proper information using the
-usb_fill_bulk_urb function, we point the urb's completion callback to
-call our own skel_write_bulk_callback function. This function is
+:c:func:`usb_fill_bulk_urb` function, we point the urb's completion callback
+to call our own ``skel_write_bulk_callback`` function. This function is
 called when the urb is finished by the USB subsystem. The callback
 function is called in interrupt context, so caution must be taken not to
 do very much processing at that time. Our implementation of
-skel_write_bulk_callback merely reports if the urb was completed
+``skel_write_bulk_callback`` merely reports if the urb was completed
 successfully or not and then returns.
 
 The read function works a bit differently from the write function in
 that we do not use an urb to transfer data from the device to the
-driver. Instead we call the usb_bulk_msg function, which can be used
+driver. Instead we call the :c:func:`usb_bulk_msg` function, which can be used
 to send or receive data from a device without having to create urbs and
-handle urb completion callback functions. We call the usb_bulk_msg
+handle urb completion callback functions. We call the :c:func:`usb_bulk_msg`
 function, giving it a buffer into which to place any data received from
 the device and a timeout value. If the timeout period expires without
 receiving any data from the device, the function will fail and return an
-error message. This can be shown with the following code:
-
-::
+error message. This can be shown with the following code::
 
     /* do an immediate bulk read to get data from the device */
     retval = usb_bulk_msg (skel->dev,
-                           usb_rcvbulkpipe (skel->dev,
-                           skel->bulk_in_endpointAddr),
-                           skel->bulk_in_buffer,
-                           skel->bulk_in_size,
-                           &count, HZ*10);
+			   usb_rcvbulkpipe (skel->dev,
+			   skel->bulk_in_endpointAddr),
+			   skel->bulk_in_buffer,
+			   skel->bulk_in_size,
+			   &count, HZ*10);
     /* if the read was successful, copy the data to user space */
     if (!retval) {
-            if (copy_to_user (buffer, skel->bulk_in_buffer, count))
-                    retval = -EFAULT;
-            else
-                    retval = count;
+	    if (copy_to_user (buffer, skel->bulk_in_buffer, count))
+		    retval = -EFAULT;
+	    else
+		    retval = count;
     }
 
 
-The usb_bulk_msg function can be very useful for doing single reads or
-writes to a device; however, if you need to read or write constantly to
+The :c:func:`usb_bulk_msg` function can be very useful for doing single reads
+or writes to a device; however, if you need to read or write constantly to
 a device, it is recommended to set up your own urbs and submit them to
 the USB subsystem.
 
 When the user program releases the file handle that it has been using to
 talk to the device, the release function in the driver is called. In
 this function we decrement our private usage count and wait for possible
-pending writes:
-
-::
+pending writes::
 
     /* decrement our usage count for the device */
     --skel->open_count;
@@ -276,20 +260,18 @@ handle smoothly is the fact that the USB device may be removed from the
 system at any point in time, even if a program is currently talking to
 it. It needs to be able to shut down any current reads and writes and
 notify the user-space programs that the device is no longer there. The
-following code (function :c:func:`skel_delete()`) is an example of
-how to do this:
-
-::
+following code (function ``skel_delete``) is an example of how to do
+this::
 
     static inline void skel_delete (struct usb_skel *dev)
     {
-        kfree (dev->bulk_in_buffer);
-        if (dev->bulk_out_buffer != NULL)
-            usb_free_coherent (dev->udev, dev->bulk_out_size,
-                dev->bulk_out_buffer,
-                dev->write_urb->transfer_dma);
-        usb_free_urb (dev->write_urb);
-        kfree (dev);
+	kfree (dev->bulk_in_buffer);
+	if (dev->bulk_out_buffer != NULL)
+	    usb_free_coherent (dev->udev, dev->bulk_out_size,
+		dev->bulk_out_buffer,
+		dev->write_urb->transfer_dma);
+	usb_free_urb (dev->write_urb);
+	kfree (dev);
     }
 
 
@@ -297,10 +279,10 @@ If a program currently has an open handle to the device, we reset the
 flag ``device_present``. For every read, write, release and other
 functions that expect a device to be present, the driver first checks
 this flag to see if the device is still present. If not, it releases
-that the device has disappeared, and a -ENODEV error is returned to the
+that the device has disappeared, and a ``-ENODEV`` error is returned to the
 user-space program. When the release function is eventually called, it
 determines if there is no device and if not, it does the cleanup that
-the skel_disconnect function normally does if there are no open files
+the ``skel_disconnect`` function normally does if there are no open files
 on the device (see Listing 5).
 
 Isochronous Data
@@ -327,13 +309,13 @@ Resources
 =========
 
 The Linux USB Project:
-`http://www.linux-usb.org/ <http://www.linux-usb.org>`__
+http://www.linux-usb.org/
 
 Linux Hotplug Project:
-`http://linux-hotplug.sourceforge.net/ <http://linux-hotplug.sourceforge.net>`__
+http://linux-hotplug.sourceforge.net/
 
 Linux USB Working Devices List:
-`http://www.qbik.ch/usb/devices/ <http://www.qbik.ch/usb/devices>`__
+http://www.qbik.ch/usb/devices/
 
 linux-usb-devel Mailing List Archives:
 http://marc.theaimsgroup.com/?l=linux-usb-devel