Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.

  You will get a new touchsreen driver for Cypress 4th generation
  devices, a driver for a special controller implementing PS/2 protocol
  in OLPC devices, and a driver for power key for SiRFprimaII PWRC.

  HID and bcm5497 now support for the 2013 MacBook Air.

  EVIOCGKEY and the rest of evdev ioctls now flush events of matching
  type from the client's event queue so that clients can be sure any
  events received after issuing EVIOCG* ioctl are new events.

  And a host of cleanups and improvements in other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: cyttsp4 - kfree xfer_buf on error path in probe()
  Input: tps6507x-ts - select INPUT_POLLDEV
  Input: bcm5974 - add support for the 2013 MacBook Air
  HID: apple: Add support for the 2013 Macbook Air
  Input: cyttsp4 - leak on error path in probe()
  Input: cyttsp4 - silence NULL dereference warning
  Input: cyttsp4 - silence shift wrap warning
  Input: tps6507x-ts - convert to polled input device infrastructure
  ARM: davinci: da850-evm: remove vref from touchscreen platform data
  Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp - I2C driver split into two modules
  Input: add OLPC AP-SP driver
  Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
  Input: tps6507x-ts - remove vref from platform data
  Input: tps6507x-ts - use bool for booleans
  Input: tps6507x-ts - remove bogus unreachable code
  Input: samsung-keypad - let device core setup the default pin configuration
  Input: wacom_i2c - implement hovering capability
  ...

4 files changed, 138 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
new file mode 100644
index 000000000000..f8674f7e5ea5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
@@ -0,0 +1,60 @@
+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+  recognized when it is pressed. It is a u32 value, and bit[31:16]
+  is debounce interval for direct key and bit[15:0] is debounce
+  interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+  are used. If bit[X] of the mask is set, the direct key X
+  is used.
+- marvell,direct-key-low-active : Direct key status register
+  tells the level of pins that connects to the direct keyes.
+  When this property is set, it means that when the pin level
+  is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+  the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+  linux key-code for rotary up. Bit[15:0] is the linux key-code
+  for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+  in the device, the value indicates the key-code for relative
+  axes measurement in the device. It is a u32 value. Bit[31:16]
+  is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+	keypad: keypad@d4012000 {
+		keypad,num-rows = <3>;
+		keypad,num-columns = <5>;
+		linux,keymap = <0x0000000e	/* KEY_BACKSPACE */
+				0x0001006b	/* KEY_END */
+				0x00020061	/* KEY_RIGHTCTRL */
+				0x0003000b	/* KEY_0 */
+				0x00040002	/* KEY_1 */
+				0x0100008b	/* KEY_MENU */
+				0x01010066	/* KEY_HOME */
+				0x010200e7	/* KEY_SEND */
+				0x01030009	/* KEY_8 */
+				0x0104000a	/* KEY_9 */
+				0x02000160	/* KEY_OK */
+				0x02010003	/* KEY_2 */
+				0x02020004	/* KEY_3 */
+				0x02030005	/* KEY_4 */
+				0x02040006>;	/* KEY_5 */
+		marvell,rotary0 = <0x006c0067>;	/* KEY_UP & KEY_DOWN */
+		marvell,direct-key-count = <1>;
+		marvell,direct-key-map = <0x001c>;
+		marvell,debounce-interval = <0x001e001e>;
+	};
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index ce3e394c0e64..942d071baaa5 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -25,14 +25,6 @@ Required Board Specific Properties:
 - samsung,keypad-num-columns: Number of column lines connected to the
   keypad controller.
 
-- row-gpios: List of gpios used as row lines. The gpio specifier for
-  this property depends on the gpio controller to which these row lines
-  are connected.
-
-- col-gpios: List of gpios used as column lines. The gpio specifier for
-  this property depends on the gpio controller to which these column
-  lines are connected.
-
 - Keys represented as child nodes: Each key connected to the keypad
   controller is represented as a child node to the keypad controller
   device node and should include the following properties.
@@ -41,6 +33,9 @@ Required Board Specific Properties:
   - linux,code: the key-code to be reported when the key is pressed
     and released.
 
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
 - linux,keypad-wakeup: use any event on keypad as wakeup event.
@@ -56,17 +51,8 @@ Example:
 		linux,input-no-autorepeat;
 		linux,input-wakeup;
 
-		row-gpios = <&gpx2 0 3 3 0
-			     &gpx2 1 3 3 0>;
-
-		col-gpios = <&gpx1 0 3 0 0
-			     &gpx1 1 3 0 0
-			     &gpx1 2 3 0 0
-			     &gpx1 3 3 0 0
-			     &gpx1 4 3 0 0
-			     &gpx1 5 3 0 0
-			     &gpx1 6 3 0 0
-			     &gpx1 7 3 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_columns>;
 
 		key_1 {
 			keypad,row = <0>;
diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
new file mode 100644
index 000000000000..513d94d6e899
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
@@ -0,0 +1,60 @@
+TI-NSPIRE Keypad
+
+Required properties:
+- compatible: Compatible property value should be "ti,nspire-keypad".
+
+- reg: Physical base address of the peripheral and length of memory mapped
+  region.
+
+- interrupts: The interrupt number for the peripheral.
+
+- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
+	maximum and minimum delay time is ~2000us and ~500us respectively
+
+- row-delay: How long to wait before scanning each row.
+
+- clocks: The clock this peripheral is attached to.
+
+- linux,keymap: The keymap to use
+	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
+
+Optional properties:
+- active-low: Specify that the keypad is active low (i.e. logical low signifies
+	a key press).
+
+Example:
+
+input {
+	compatible = "ti,nspire-keypad";
+	reg = <0x900E0000 0x1000>;
+	interrupts = <16>;
+
+	scan-interval = <1000>;
+	row-delay = <200>;
+
+	clocks = <&apb_pclk>;
+
+	linux,keymap = <
+	0x0000001c	0x0001001c	0x00040039
+	0x0005002c	0x00060015	0x0007000b
+	0x0008000f	0x0100002d	0x01010011
+	0x0102002f	0x01030004	0x01040016
+	0x01050014	0x0106001f	0x01070002
+	0x010a006a	0x02000013	0x02010010
+	0x02020019	0x02030007	0x02040018
+	0x02050031	0x02060032	0x02070005
+	0x02080028	0x0209006c	0x03000026
+	0x03010025	0x03020024	0x0303000a
+	0x03040017	0x03050023	0x03060022
+	0x03070008	0x03080035	0x03090069
+	0x04000021	0x04010012	0x04020020
+	0x0404002e	0x04050030	0x0406001e
+	0x0407000d	0x04080037	0x04090067
+	0x05010038	0x0502000c	0x0503001b
+	0x05040034	0x0505001a	0x05060006
+	0x05080027	0x0509000e	0x050a006f
+	0x0600002b	0x0602004e	0x06030068
+	0x06040003	0x0605006d	0x06060009
+	0x06070001	0x0609000f	0x0708002a
+	0x0709001d	0x070a0033	>;
+};
diff --git a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
new file mode 100644
index 000000000000..0e72183f52bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
@@ -0,0 +1,13 @@
+OLPC AP-SP serio interface
+
+Required properties:
+- compatible : "olpc,ap-sp"
+- reg : base address and length of SoC's WTM registers
+- interrupts : SP-AP interrupt
+
+Example:
+	ap-sp@d4290000 {
+		compatible = "olpc,ap-sp";
+		reg = <0xd4290000 0x1000>;
+		interrupts = <40>;
+	}