summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-12-13 08:34:11 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-12-13 08:34:11 -0800
commit5233c331cfb41433bc167fc7c70ea67c1133ffec (patch)
tree1ab0da40a3069c54e41a2aed8a0ada8ddb325e46 /Documentation/devicetree
parent58f253d26254b7ec0faa0a67d70912facd6687e4 (diff)
parentff6af28faff53a7389230026b83e543385f7b21d (diff)
Merge tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "It's been an busy period for mmc. Quite some changes in the mmc core, two new mmc host drivers, some existing drivers being extended to support new IP versions and lots of other updates. MMC core: - Delete eMMC packed command support - Introduce mmc_abort_tuning() to enable eMMC tuning to fail gracefully - Introduce mmc_can_retune() to see if a host can be retuned - Re-work and improve the sequence when sending a CMD6 for mmc - Enable CDM13 polling when switching to HS and HS DDR mode for mmc - Relax checking for CMD6 errors after switch to HS200 - Re-factoring the code dealing with the mmc block queue - Recognize whether the eMMC card supports CMDQ - Fix 4K native sector check - Don't power off the card when starting the host - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries - Improve error handling and drop meaningless BUG_ONs() - Lots of clean-ups and changes to improve the quality of the code MMC host: - sdhci: Fix tuning sequence and clean-up the related code - sdhci: Add support to via DT override broken SDHCI cap register bits - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant - sdhci-msm: Update clock management - sdhci-msm: Add support for eMMC HS400 mode - sdhci-msm: Deploy runtime/system PM support - sdhci-iproc: Extend driver support to newer IP versions - sdhci-pci: Add support for Intel GLK - sdhci-pci: Add support for Intel NI byt sdio - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus - sdhci: Lots of various small improvements and clean-ups - tmio: Add support for tuning - sh_mobile_sdhi: Add support for tuning - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC - sh_mobile_sdhi: remove support for sh7372 - davinci: Use mmc_of_parse() to enable generic mmc DT bindings - meson: Add new driver to support GX platforms - dw_mmc: Deploy generic runtime/system PM support - dw_mmc: Lots of various small improvements As a part of the mmc changes this time, I have also pulled in an immutable branch/tag (soc-device-match-tag1) hosted by Geert Uytterhoeven, to share the implementation of the new soc_device_match() interface. This is needed by these mmc related changes: - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0 - soc: fsl: add GUTS driver for QorIQ platforms" * tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits) mmc: sdhci-cadence: add Cadence SD4HC support mmc: sdhci: export sdhci_execute_tuning() mmc: sdhci: Tidy tuning loop mmc: sdhci: Simplify tuning block size logic mmc: sdhci: Factor out tuning helper functions mmc: sdhci: Use mmc_abort_tuning() mmc: mmc: Introduce mmc_abort_tuning() mmc: sdhci: Always allow tuning to fall back to fixed sampling mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops mmc: sdhci: Fix recovery from tuning timeout Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure" mmc: mmc: Relax checking for switch errors after HS200 switch mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate mmc: dw_mmc: display the clock message only one time when card is polling mmc: dw_mmc: add the debug message for polling and non-removable mmc: dw_mmc: check the "present" variable before checking flags ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt32
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt9
-rw-r--r--Documentation/devicetree/bindings/mmc/renesas,mmcif.txt3
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-cadence.txt30
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-msm.txt1
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci.txt13
-rw-r--r--Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt8
-rw-r--r--Documentation/devicetree/bindings/mmc/tmio_mmc.txt2
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/guts.txt (renamed from Documentation/devicetree/bindings/powerpc/fsl/guts.txt)3
9 files changed, 94 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
new file mode 100644
index 000000000000..7f95ec400863
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
@@ -0,0 +1,32 @@
+Amlogic SD / eMMC controller for S905/GXBB family SoCs
+
+The MMC 5.1 compliant host controller on Amlogic provides the
+interface for SD, eMMC and SDIO devices.
+
+This file documents the properties in addition to those available in
+the MMC core bindings, documented by mmc.txt.
+
+Required properties:
+- compatible : contains one of:
+ - "amlogic,meson-gx-mmc"
+ - "amlogic,meson-gxbb-mmc"
+ - "amlogic,meson-gxl-mmc"
+ - "amlogic,meson-gxm-mmc"
+- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
+- clock-names: Should contain the following:
+ "core" - Main peripheral bus clock
+ "clkin0" - Parent clock of internal mux
+ "clkin1" - Other parent clock of internal mux
+ The driver has an interal mux clock which switches between clkin0 and clkin1 depending on the
+ clock rate requested by the MMC core.
+
+Example:
+
+ sd_emmc_a: mmc@70000 {
+ compatible = "amlogic,meson-gxbb-mmc";
+ reg = <0x0 0x70000 0x0 0x2000>;
+ interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ pinctrl-0 = <&emmc_pins>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
index be56d2bd474a..954561d09a8e 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
@@ -7,6 +7,15 @@ Required properties:
- compatible : Should be one of the following
"brcm,bcm2835-sdhci"
"brcm,sdhci-iproc-cygnus"
+ "brcm,sdhci-iproc"
+
+Use brcm2835-sdhci for Rasperry PI.
+
+Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
+restricted to 32bit host accesses to SDHCI registers.
+
+Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
+8, 16, 32-bit host access to SDHCI register.
- clocks : The clock feeding the SDHCI controller.
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
index ff611fa66871..e4ba92aa035e 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -8,11 +8,14 @@ Required properties:
- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a
fallback. Examples with <soctype> are:
+ - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs
- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
+ - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs
- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
- "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
- "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs
- "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs
+ - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs
- clocks: reference to the functional clock
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
new file mode 100644
index 000000000000..750374fc9d94
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
@@ -0,0 +1,30 @@
+* Cadence SD/SDIO/eMMC Host Controller
+
+Required properties:
+- compatible: should be "cdns,sd4hc".
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+For eMMC configuration, supported speed modes are not indicated by the SDHCI
+Capabilities Register. Instead, the following properties should be specified
+if supported. See mmc.txt for details.
+- mmc-ddr-1_8v
+- mmc-ddr-1_2v
+- mmc-hs200-1_8v
+- mmc-hs200-1_2v
+- mmc-hs400-1_8v
+- mmc-hs400-1_2v
+
+Example:
+ emmc: sdhci@5a000000 {
+ compatible = "cdns,sd4hc";
+ reg = <0x5a000000 0x400>;
+ interrupts = <0 78 4>;
+ clocks = <&clk 4>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 485483a63d8c..0576264eab5e 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -17,6 +17,7 @@ Required properties:
"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
"core" - SDC MMC clock (MCLK) (required)
"bus" - SDCC bus voter clock (optional)
+ "xo" - TCXO clock (optional)
Example:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci.txt b/Documentation/devicetree/bindings/mmc/sdhci.txt
new file mode 100644
index 000000000000..1c95a1a555c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci.txt
@@ -0,0 +1,13 @@
+The properties specific for SD host controllers. For properties shared by MMC
+host controllers refer to the mmc[1] bindings.
+
+ [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Optional properties:
+- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
+ property corresponds to the bits in the sdhci capabilty register. If the bit
+ is on in the mask then the bit is incorrect in the register and should be
+ turned off, before applying sdhci-caps.
+- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit
+ property corresponds to the bits in the sdhci capability register. If the
+ bit is on in the property then the bit should be turned on.
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index bfa461aaac99..7fd17c3da116 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -59,8 +59,9 @@ Optional properties:
is specified and the ciu clock is specified then we'll try to set the ciu
clock to this at probe time.
-* clock-freq-min-max: Minimum and Maximum clock frequency for card output
+* clock-freq-min-max (DEPRECATED): Minimum and Maximum clock frequency for card output
clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
+ (Use the "max-frequency" instead of "clock-freq-min-max".)
* num-slots: specifies the number of slots supported by the controller.
The number of physical slots actually used could be equal or less than the
@@ -74,11 +75,6 @@ Optional properties:
* card-detect-delay: Delay in milli-seconds before detecting card after card
insert event. The default value is 0.
-* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
- (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
-
-* broken-cd: as documented in mmc core bindings.
-
* vmmc-supply: The phandle to the regulator to use for vmmc. If this is
specified we'll defer probe until we can find this regulator.
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index 13df9c2399c3..a1650edfd2b7 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -11,8 +11,8 @@ optional bindings can be used.
Required properties:
- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
- "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+ "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC
"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/soc/fsl/guts.txt
index b71b2039e112..07adca914d3d 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -25,6 +25,9 @@ Recommended properties:
- fsl,liodn-bits : Indicates the number of defined bits in the LIODN
registers, for those SOCs that have a PAMU device.
+ - little-endian : Indicates that the global utilities block is little
+ endian. The default is big endian.
+
Examples:
global-utilities@e0000 { /* global utilities block */
compatible = "fsl,mpc8548-guts";