Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - RK805 Power Management IC (PMIC)
   - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
   - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs

  New Device Support:
   - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
   - Add support for X-Powers AXP806 to axp20x
   - Add support for X-Powers AXP813 to axp20x
   - Add support for Intel Sunrise Point LPSS to intel-lpss-pci

  New Functionality:
   - Amend API to provide register layout; atmel-smc

  Fix-ups:
   - DT re-work; omap, nokia
   - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
   - Fix chip ID formatting issue(s); rk808
   - Optionally register touchscreen devices; da9052-core
   - Documentation improvements; twl-core
   - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
   - Drop unnecessary static declaration; max8925-i2c
   - Kconfig changes (missing deps and remove module support)
   - Slim down oversized licence statement; hi6421-pmic-core
   - Use managed resources (devm_*); lp87565
   - Supply proper error checking/handling; t7l66xb

  Bug Fixes:
   - Fix counter duplication issue; da9052-core
   - Fix potential NULL deference issue; max8998
   - Leave SPI-NOR write-protection bit alone; lpc_ich
   - Ensure device is put into reset during suspend; intel-lpss
   - Correct register offset variable size; omap-usb-tll"

* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
  mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
  mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
  dt-bindings: mfd: Add bindings for ZII RAVE devices
  mfd: omap-usb-tll: Fix register offsets
  mfd: da9052: Constify spi_device_id
  mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
  mfd: da9055: Constify i2c_device_id
  mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
  mfd: t7l66xb: Handle return value of clk_prepare_enable
  mfd: Add ROHM BD9571MWV-M PMIC DT bindings
  mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
  mfd: lp87565: Convert to use devm_mfd_add_devices()
  mfd: Add support for TPS68470 device
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
  mfd: syscon: atmel-smc: Add helper to retrieve register layout
  mfd: axp20x: Use correct platform device ID for many PEK
  dt-bindings: mfd: axp20x: Introduce bindings for AXP813
  mfd: axp20x: Add support for AXP813 PMIC
  dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
  mfd: Add ROHM BD9571MWV-M MFD PMIC driver
  ...

14 files changed, 392 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
index 8ce9cd2855b5..c143948b2a37 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
@@ -20,8 +20,8 @@ i2c@0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	retu-mfd: retu@1 {
-		compatible = "retu-mfd";
+	retu: retu@1 {
+		compatible = "nokia,retu";
 		reg = <0x1>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
new file mode 100644
index 000000000000..a04aa5c04103
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
@@ -0,0 +1,27 @@
+STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter
+
+STM32 Low-Power Timer provides several counter modes. It can be used as:
+- quadrature encoder to detect angular position and direction of rotary
+  elements, from IN1 and IN2 input signals.
+- simple counter from IN1 input signal.
+
+Must be a sub-node of an STM32 Low-Power Timer device tree node.
+See ../mfd/stm32-lptimer.txt for details about the parent node.
+
+Required properties:
+- compatible:		Must be "st,stm32-lptimer-counter".
+- pinctrl-names: 	Set to "default".
+- pinctrl-0: 		List of phandles pointing to pin configuration nodes,
+			to set IN1/IN2 pins in mode of operation for Low-Power
+			Timer input on external pin.
+
+Example:
+	timer@40002400 {
+		compatible = "st,stm32-lptimer";
+		...
+		counter {
+			compatible = "st,stm32-lptimer-counter";
+			pinctrl-names = "default";
+			pinctrl-0 = <&lptim1_in_pins>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
new file mode 100644
index 000000000000..85e6806b17d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
@@ -0,0 +1,23 @@
+STMicroelectronics STM32 Low-Power Timer Trigger
+
+STM32 Low-Power Timer provides trigger source (LPTIM output) that can be used
+by STM32 internal ADC and/or DAC.
+
+Must be a sub-node of an STM32 Low-Power Timer device tree node.
+See ../mfd/stm32-lptimer.txt for details about the parent node.
+
+Required properties:
+- compatible:		Must be "st,stm32-lptimer-trigger".
+- reg:			Identify trigger hardware block. Must be 0, 1 or 2
+			respectively for lptimer1, lptimer2 or lptimer3
+			trigger output.
+
+Example:
+	timer@40002400 {
+		compatible = "st,stm32-lptimer";
+		...
+		trigger@0 {
+			compatible = "st,stm32-lptimer-trigger";
+			reg = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 26eeed373934..1103ce2030fb 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible:		Should be one of the following
 			"atmel,at91sam9260-smc", "syscon"
 			"atmel,sama5d3-smc", "syscon"
+			"atmel,sama5d2-smc", "syscon"
 - reg:			Contains offset/length value of the SMC memory
 			region.
 
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index aca09af66514..9455503b0299 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -7,7 +7,14 @@ axp209 (X-Powers)
 axp221 (X-Powers)
 axp223 (X-Powers)
 axp803 (X-Powers)
+axp806 (X-Powers)
 axp809 (X-Powers)
+axp813 (X-Powers)
+
+The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything
+other than the packaging. Pins are routed separately. As such they should
+be treated as separate entities. The other half is an AC100 RTC/codec
+combo chip. Please see ./ac100.txt for its bindings.
 
 Required properties:
 - compatible: should be one of:
@@ -19,6 +26,7 @@ Required properties:
     * "x-powers,axp803"
     * "x-powers,axp806"
     * "x-powers,axp809"
+    * "x-powers,axp813"
 - reg: The I2C slave address or RSB hardware address for the AXP chip
 - interrupt-parent: The parent interrupt controller
 - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
@@ -28,12 +36,14 @@ Required properties:
 Optional properties:
 - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
 		      AXP152/20X: range:  750-1875, Default: 1.5 MHz
-		      AXP22X/80X: range: 1800-4050, Default: 3   MHz
+		      AXP22X/8XX: range: 1800-4050, Default: 3   MHz
 
-- x-powers,drive-vbus-en: axp221 / axp223 only boolean, set this when the
-		  N_VBUSEN pin is used as an output pin to control an external
-		  regulator to drive the OTG VBus, rather then as an input pin
-		  which signals whether the board is driving OTG VBus or not.
+- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is
+			  used as an output pin to control an external
+			  regulator to drive the OTG VBus, rather then
+			  as an input pin which signals whether the
+			  board is driving OTG VBus or not.
+			  (axp221 / axp223 / axp813 only)
 
 - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is
 			wired for master mode. The default is slave mode.
@@ -171,6 +181,36 @@ LDO_IO1		: LDO		: ips-supply		: GPIO 1
 RTC_LDO		: LDO		: ips-supply		: always on
 SW		: On/Off Switch : swin-supply
 
+AXP813 regulators, type, and corresponding input supply names:
+
+Regulator	  Type		  Supply Name		  Notes
+---------	  ----		  -----------		  -----
+DCDC1		: DC-DC buck	: vin1-supply
+DCDC2		: DC-DC buck	: vin2-supply		: poly-phase capable
+DCDC3		: DC-DC	buck	: vin3-supply		: poly-phase capable
+DCDC4		: DC-DC	buck	: vin4-supply
+DCDC5		: DC-DC	buck	: vin5-supply		: poly-phase capable
+DCDC6		: DC-DC	buck	: vin6-supply		: poly-phase capable
+DCDC7		: DC-DC	buck	: vin7-supply
+ALDO1		: LDO		: aldoin-supply		: shared supply
+ALDO2		: LDO		: aldoin-supply		: shared supply
+ALDO3		: LDO		: aldoin-supply		: shared supply
+DLDO1		: LDO		: dldoin-supply		: shared supply
+DLDO2		: LDO		: dldoin-supply		: shared supply
+DLDO3		: LDO		: dldoin-supply		: shared supply
+DLDO4		: LDO		: dldoin-supply		: shared supply
+ELDO1		: LDO		: eldoin-supply		: shared supply
+ELDO2		: LDO		: eldoin-supply		: shared supply
+ELDO3		: LDO		: eldoin-supply		: shared supply
+FLDO1		: LDO		: fldoin-supply		: shared supply
+FLDO2		: LDO		: fldoin-supply		: shared supply
+FLDO3		: LDO		: fldoin-supply		: shared supply
+LDO_IO0		: LDO		: ips-supply		: GPIO 0
+LDO_IO1		: LDO		: ips-supply		: GPIO 1
+RTC_LDO		: LDO		: ips-supply		: always on
+SW		: On/Off Switch : swin-supply
+DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
+
 Example:
 
 axp209: pmic@34 {
diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
new file mode 100644
index 000000000000..9ab216a851d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
@@ -0,0 +1,49 @@
+* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings
+
+Required properties:
+ - compatible		: Should be "rohm,bd9571mwv".
+ - reg			: I2C slave address.
+ - interrupt-parent	: Phandle to the parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+ - gpio-controller      : Marks the device node as a GPIO Controller.
+ - #gpio-cells          : Should be two.  The first cell is the pin number and
+                            the second cell is used to specify flags.
+                            See ../gpio/gpio.txt for more information.
+ - regulators:          : List of child nodes that specify the regulator
+                            initialization data. Child nodes must be named
+                            after their hardware counterparts:
+			     - vd09
+			     - vd18
+			     - vd25
+			     - vd33
+			     - dvfs
+			    Each child node is defined using the standard
+			    binding for regulators.
+
+Example:
+
+	pmic: pmic@30 {
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
index 9554292dc6cb..57fa74e65664 100644
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -4,6 +4,14 @@ Required properties:
 - compatible : Should be "dlg,da9052", "dlg,da9053-aa",
 			 "dlg,da9053-ab", or "dlg,da9053-bb"
 
+Optional properties:
+- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
+                    input lines are used as general purpose analogue
+					input.
+- tsiref-supply: Phandle to the regulator, which provides the reference
+                 voltage for the TSIREF pin. Must be provided when the
+			     touchscreen pins are used for ADC purposes.
+
 Sub-nodes:
 - regulators : Contain the regulator nodes. The DA9052/53 regulators are
   bound using their names as listed below:
diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt
new file mode 100644
index 000000000000..876242394a16
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/retu.txt
@@ -0,0 +1,25 @@
+* Device tree bindings for Nokia Retu and Tahvo multi-function device
+
+Retu and Tahvo are a multi-function devices found on Nokia Internet
+Tablets (770, N800 and N810). The Retu chip provides watchdog timer
+and power button control functionalities while Tahvo chip provides
+USB transceiver functionality.
+
+Required properties:
+- compatible:		"nokia,retu" or "nokia,tahvo"
+- reg:			Specifies the CBUS slave address of the ASIC chip
+- interrupts: 		The interrupt line the device is connected to
+- interrupt-parent:	The parent interrupt controller
+
+Example:
+
+cbus0 {
+	compatible = "i2c-cbus-gpio";
+	...
+	retu: retu@1 {
+		compatible = "nokia,retu";
+		interrupt-parent = <&gpio4>;
+		interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+		reg = <0x1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9636ae8d8d41..91b65227afeb 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,11 +1,14 @@
 RK8XX Power Management Integrated Circuit
 
 The rk8xx family current members:
+rk805
 rk808
 rk818
 
 Required properties:
-- compatible: "rockchip,rk808", "rockchip,rk818"
+- compatible: "rockchip,rk805"
+- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@@ -18,6 +21,14 @@ Optional properties:
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
 
+Optional RK805 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc6-supply:  The input supply for LDO_REG3
+
 Optional RK808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
@@ -56,6 +67,15 @@ by a child node of the 'regulators' node.
 		/* standard regulator bindings here */
 	};
 
+Following regulators of the RK805 PMIC regulators are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK805 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 3
+
 Following regulators of the RK808 PMIC block are supported. Note that
 the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
 number as described in RK808 datasheet.
diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
new file mode 100644
index 000000000000..2a9ff29db9c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
@@ -0,0 +1,48 @@
+STMicroelectronics STM32 Low-Power Timer
+
+The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
+functions:
+- PWM output (with programmable prescaler, configurable polarity)
+- Quadrature encoder, counter
+- Trigger source for STM32 ADC/DAC (LPTIM_OUT)
+
+Required properties:
+- compatible:		Must be "st,stm32-lptimer".
+- reg:			Offset and length of the device's register set.
+- clocks:		Phandle to the clock used by the LP Timer module.
+- clock-names:		Must be "mux".
+- #address-cells:	Should be '<1>'.
+- #size-cells:		Should be '<0>'.
+
+Optional subnodes:
+- pwm:			See ../pwm/pwm-stm32-lp.txt
+- counter:		See ../iio/timer/stm32-lptimer-cnt.txt
+- trigger:		See ../iio/timer/stm32-lptimer-trigger.txt
+
+Example:
+
+	timer@40002400 {
+		compatible = "st,stm32-lptimer";
+		reg = <0x40002400 0x400>;
+		clocks = <&timer_clk>;
+		clock-names = "mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwm {
+			compatible = "st,stm32-pwm-lp";
+			pinctrl-names = "default";
+			pinctrl-0 = <&lppwm1_pins>;
+		};
+
+		trigger@0 {
+			compatible = "st,stm32-lptimer-trigger";
+			reg = <0>;
+		};
+
+		counter {
+			compatible = "st,stm32-lptimer-counter";
+			pinctrl-names = "default";
+			pinctrl-0 = <&lptim1_in_pins>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt
new file mode 100644
index 000000000000..93602c7a19c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for TI TPS61050/61052 Boost Converters
+
+The TP61050/TPS61052 is a high-power "white LED driver". The
+device provides LED, GPIO and regulator functionalities.
+
+Required properties:
+- compatible:		"ti,tps61050" or "ti,tps61052"
+- reg:			Specifies the I2C slave address
+
+Example:
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
new file mode 100644
index 000000000000..088eff9ddb78
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
@@ -0,0 +1,39 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor
+
+RAVE Supervisory Processor communicates with SoC over UART. It is
+expected that its Device Tree node is specified as a child of a node
+corresponding to UART controller used for communication.
+
+Required parent device properties:
+
+ - compatible: Should be one of:
+	- "zii,rave-sp-niu"
+	- "zii,rave-sp-mezz"
+	- "zii,rave-sp-esb"
+	- "zii,rave-sp-rdu1"
+	- "zii,rave-sp-rdu2"
+
+ - current-speed: Should be set to baud rate SP device is using
+
+RAVE SP consists of the following sub-devices:
+
+Device				 Description
+------				 -----------
+rave-sp-wdt			: Watchdog
+rave-sp-nvmem			: Interface to onborad EEPROM
+rave-sp-backlight		: Display backlight
+rave-sp-hwmon			: Interface to onboard hardware sensors
+rave-sp-leds			: Interface to onboard LEDs
+rave-sp-input			: Interface to onboard power button
+
+Example of usage:
+
+	rdu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
new file mode 100644
index 000000000000..eee3dc260934
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -0,0 +1,63 @@
+Pincontrol driver for RK805 Power management IC.
+
+RK805 has 2 pins which can be configured as GPIO output only.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+		<pinctrl-binding.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- #gpio-cells: Should be two. The first cell is the pin number and the
+  second is the GPIO flags.
+
+- gpio-controller: Marks the device node as a GPIO controller.
+
+- pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
+
+First 2 properties must be added in the RK805 PMIC node, documented in
+Documentation/devicetree/bindings/mfd/rk808.txt
+
+Optional properties:
+-------------------
+Following are optional properties defined as pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of properties will leave the configuration
+on default.
+	function,
+	output-low,
+	output-high.
+
+Valid values for function properties are: gpio.
+
+Theres is also not customised properties for any GPIO.
+
+Example:
+--------
+rk805: rk805@18 {
+	compatible = "rockchip,rk805";
+	...
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>, <&rk805_default>;
+
+	rk805_default: pinmux {
+		gpio01 {
+			pins = "gpio0", "gpio1";
+			function = "gpio";
+			output-high;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
new file mode 100644
index 000000000000..f8338d11fd2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
@@ -0,0 +1,24 @@
+STMicroelectronics STM32 Low-Power Timer PWM
+
+STM32 Low-Power Timer provides single channel PWM.
+
+Must be a sub-node of an STM32 Low-Power Timer device tree node.
+See ../mfd/stm32-lptimer.txt for details about the parent node.
+
+Required parameters:
+- compatible:		Must be "st,stm32-pwm-lp".
+
+Optional properties:
+- pinctrl-names: 	Set to "default".
+- pinctrl-0: 		Phandle pointing to pin configuration node for PWM.
+
+Example:
+	timer@40002400 {
+		compatible = "st,stm32-lptimer";
+		...
+		pwm {
+			compatible = "st,stm32-pwm-lp";
+			pinctrl-names = "default";
+			pinctrl-0 = <&lppwm1_pins>;
+		};
+	};