Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next

4 files changed, 288 insertions, 57 deletions

diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
new file mode 100644
index 000000000000..bac4b1b1060f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -0,0 +1,124 @@
+Audio Graph Card:
+
+Audio Graph Card specifies audio DAI connections of SoC <-> codec.
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Audio Graph Card property is same as Simple Card.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+
+Below are same as Simple-Card.
+
+- label
+- dai-format
+- frame-master
+- bitclock-master
+- bitclock-inversion
+- frame-inversion
+- dai-tdm-slot-num
+- dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Required properties:
+
+- compatible				: "audio-graph-card";
+- dais					: list of CPU DAI port{s}
+
+Example: Single DAI case
+
+	sound_card {
+		compatible = "audio-graph-card";
+
+		dais = <&cpu_port>;
+	};
+
+	dai-controller {
+		...
+		cpu_port: port {
+			cpu_endpoint: endpoint {
+				remote-endpoint = <&codec_endpoint>;
+
+				dai-format = "left_j";
+				...
+			};
+		};
+	};
+
+	audio-codec {
+		...
+		port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint>;
+			};
+		};
+	};
+
+Example: Multi DAI case
+
+	sound-card {
+		compatible = "audio-graph-card";
+
+		label = "sound-card";
+
+		dais = <&cpu_port0
+			&cpu_port1
+			&cpu_port2>;
+	};
+
+	audio-codec@0 {
+		...
+		port {
+			codec0_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint0>;
+			};
+		};
+	};
+
+	audio-codec@1 {
+		...
+		port {
+			codec1_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint1>;
+			};
+		};
+	};
+
+	audio-codec@2 {
+		...
+		port {
+			codec2_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint2>;
+			};
+		};
+	};
+
+	dai-controller {
+		...
+		ports {
+			cpu_port0: port@0 {
+				cpu_endpoint0: endpoint {
+					remote-endpoint = <&codec0_endpoint>;
+
+					dai-format = "left_j";
+					...
+				};
+			};
+			cpu_port1: port@1 {
+				cpu_endpoint1: endpoint {
+					remote-endpoint = <&codec1_endpoint>;
+
+					dai-format = "i2s";
+					...
+				};
+			};
+			cpu_port2: port@2 {
+				cpu_endpoint2: endpoint {
+					remote-endpoint = <&codec2_endpoint>;
+
+					dai-format = "i2s";
+					...
+				};
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
new file mode 100644
index 000000000000..b63c5594bbb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
@@ -0,0 +1,117 @@
+Audio-Graph-SCU-Card:
+
+Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM".
+
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Audio-Graph-SCU-Card property is same as
+Simple-Card / Simple-SCU-Card / Audio-Graph-Card.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+    ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt
+    ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+
+Below are same as Simple-Card / Audio-Graph-Card.
+
+- label
+- dai-format
+- frame-master
+- bitclock-master
+- bitclock-inversion
+- frame-inversion
+- dai-tdm-slot-num
+- dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Below are same as Simple-SCU-Card.
+
+- convert-rate
+- convert-channels
+- prefix
+- routing
+
+Required properties:
+
+- compatible				: "audio-graph-scu-card";
+- dais					: list of CPU DAI port{s}
+
+Example 1. Sampling Rate Conversion
+
+	sound_card {
+		compatible = "audio-graph-scu-card";
+
+		label = "sound-card";
+		prefix = "codec";
+		routing = "codec Playback", "DAI0 Playback",
+			"codec Playback", "DAI1 Playback";
+		convert-rate = <48000>;
+
+		dais = <&cpu_port>;
+	};
+
+	audio-codec {
+		...
+
+		port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint>;
+			};
+		};
+	};
+
+	dai-controller {
+		...
+		cpu_port: port {
+			cpu_endpoint: endpoint {
+				remote-endpoint = <&codec_endpoint>;
+
+				dai-format = "left_j";
+				...
+			};
+		};
+	};
+
+Example 2. 2 CPU 1 Codec (Mixing)
+
+	sound_card {
+		compatible = "audio-graph-scu-card";
+
+		label = "sound-card";
+		prefix = "codec";
+		routing = "codec Playback", "DAI0 Playback",
+			"codec Playback", "DAI1 Playback";
+		convert-rate = <48000>;
+
+		dais = <&cpu_port0
+			&cpu_port1>;
+	};
+
+	audio-codec {
+		...
+
+		port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint0>;
+			};
+		};
+	};
+
+	dai-controller {
+		...
+		ports {
+			cpu_port0: port {
+				cpu_endpoint0: endpoint {
+					remote-endpoint = <&codec_endpoint>;
+
+					dai-format = "left_j";
+					...
+				};
+			};
+			cpu_port1: port {
+				cpu_endpoint1: endpoint {
+					dai-format = "left_j";
+					...
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 15a7316e4c91..7246bb268bf9 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
 **     Asynchronous mode
 ------------------
 
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
 example)
 
 	sound {
-		compatible = "renesas,rsrc-card";
+		compatible = "simple-scu-audio-card";
 		...
 		/*
 		 * SRC Asynchronous mode setting
@@ -97,12 +97,12 @@ example)
 		 * Inputed 48kHz data will be converted to
 		 * system specified Hz
 		 */
-		convert-rate = <48000>;
+		simple-audio-card,convert-rate = <48000>;
 		...
-		cpu {
+		simple-audio-card,cpu {
 			sound-dai = <&rcar_sound>;
 		};
-		codec {
+		simple-audio-card,codec {
 			...
 		};
 	};
@@ -141,23 +141,23 @@ For more detail information, see below
 	${LINUX}/sound/soc/sh/rcar/ctu.c
 	 - comment of header
 
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
 example)
 
 	sound {
-		compatible = "renesas,rsrc-card";
+		compatible = "simple-scu-audio-card";
 		...
 		/*
 		 * CTU setting
 		 * All input data will be converted to 2ch
 		 * as output data
 		 */
-		convert-channels = <2>;
+		simple-audio-card,convert-channels = <2>;
 		...
-		cpu {
+		simple-audio-card,cpu {
 			sound-dai = <&rcar_sound>;
 		};
-		codec {
+		simple-audio-card,codec {
 			...
 		};
 	};
@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
 	aplay -D plughw:0,0 xxxx.wav &
 	aplay -D plughw:0,1 yyyy.wav
 
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
 Ex)
 	[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
 	                            |
 	[MEM] -> [SRC2] -> [CTU03] -+
 
 	sound {
-		compatible = "renesas,rsrc-card";
+		compatible = "simple-scu-audio-card";
 		...
-		cpu@0 {
+		simple-audio-card,cpu@0 {
 			sound-dai = <&rcar_sound 0>;
 		};
-		cpu@1 {
+		simple-audio-card,cpu@1 {
 			sound-dai = <&rcar_sound 1>;
 		};
-		codec {
+		simple-audio-card,codec {
 			...
 		};
 	};
@@ -368,6 +368,10 @@ Required properties:
 				  see below for detail.
 - #sound-dai-cells		: it must be 0 if your system is using single DAI
 				  it must be 1 if your system is using multi  DAI
+- clocks			: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+- clock-names			: List of necessary clock names.
+				  "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
+				  "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
 
 Optional properties:
 - #clock-cells			: it must be 0 if your system has audio_clkout
@@ -375,6 +379,9 @@ Optional properties:
 - clock-frequency		: for all audio_clkout0/1/2/3
 - clkout-lr-asynchronous	: boolean property. it indicates that audio_clkoutn
 				  is asynchronizes with lr-clock.
+- resets			: References to SSI resets.
+- reset-names			: List of valid reset names.
+				  "ssi-all", "ssi.X"
 
 SSI subnode properties:
 - interrupts			: Should contain SSI interrupt for PIO transfer
diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
index d6fe47ed09af..327d229a51b2 100644
--- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
@@ -1,35 +1,29 @@
-ASoC simple SCU Sound Card
+ASoC Simple SCU Sound Card
 
-Simple-Card specifies audio DAI connections of SoC <-> codec.
+Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM".
+For example, you can use this driver if you want to exchange sampling rate convert,
+Mixing, etc...
 
 Required properties:
 
 - compatible				: "simple-scu-audio-card"
 					  "renesas,rsrc-card"
-
 Optional properties:
 
-- simple-audio-card,name		: User specified audio sound card name, one string
-					  property.
-- simple-audio-card,cpu			: CPU   sub-node
-- simple-audio-card,codec		: CODEC sub-node
+- simple-audio-card,name		: see simple-audio-card.txt
+- simple-audio-card,cpu			: see simple-audio-card.txt
+- simple-audio-card,codec		: see simple-audio-card.txt
 
 Optional subnode properties:
 
-- simple-audio-card,format		: CPU/CODEC common audio format.
-					  "i2s", "right_j", "left_j" , "dsp_a"
-					  "dsp_b", "ac97", "pdm", "msb", "lsb"
-- simple-audio-card,frame-master	: Indicates dai-link frame master.
-					  phandle to a cpu or codec subnode.
-- simple-audio-card,bitclock-master	: Indicates dai-link bit clock master.
-					  phandle to a cpu or codec subnode.
-- simple-audio-card,bitclock-inversion	: bool property. Add this if the
-					  dai-link uses bit clock inversion.
-- simple-audio-card,frame-inversion	: bool property. Add this if the
-					  dai-link uses frame clock inversion.
+- simple-audio-card,format		: see simple-audio-card.txt
+- simple-audio-card,frame-master	: see simple-audio-card.txt
+- simple-audio-card,bitclock-master	: see simple-audio-card.txt
+- simple-audio-card,bitclock-inversion	: see simple-audio-card.txt
+- simple-audio-card,frame-inversion	: see simple-audio-card.txt
 - simple-audio-card,convert-rate	: platform specified sampling rate convert
 - simple-audio-card,convert-channels	: platform specified converted channel size (2 - 8 ch)
-- simple-audio-card,prefix		: see audio-routing
+- simple-audio-card,prefix		: see routing
 - simple-audio-card,routing		: A list of the connections between audio components.
 					  Each entry is a pair of strings, the first being the connection's sink,
 					  the second being the connection's source. Valid names for sources.
@@ -38,32 +32,23 @@ Optional subnode properties:
 
 Required CPU/CODEC subnodes properties:
 
-- sound-dai				: phandle and port of CPU/CODEC
+- sound-dai				: see simple-audio-card.txt
 
 Optional CPU/CODEC subnodes properties:
 
-- clocks / system-clock-frequency	: specify subnode's clock if needed.
-					  it can be specified via "clocks" if system has
-					  clock node (= common clock), or "system-clock-frequency"
-					  (if system doens't support common clock)
-					  If a clock is specified, it is
-					  enabled with clk_prepare_enable()
-					  in dai startup() and disabled with
-					  clk_disable_unprepare() in dai
-					  shutdown().
+- clocks / system-clock-frequency	: see simple-audio-card.txt
 
-Example 1. Sampling Rate Covert
+Example 1. Sampling Rate Conversion
 
 sound {
 	compatible = "simple-scu-audio-card";
 
 	simple-audio-card,name = "rsnd-ak4643";
 	simple-audio-card,format = "left_j";
-	simple-audio-card,format = "left_j";
 	simple-audio-card,bitclock-master = <&sndcodec>;
 	simple-audio-card,frame-master = <&sndcodec>;
 
-	simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */
+	simple-audio-card,convert-rate = <48000>;
 
 	simple-audio-card,prefix = "ak4642";
 	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
@@ -79,20 +64,18 @@ sound {
 	};
 };
 
-Example 2. 2 CPU 1 Codec
+Example 2. 2 CPU 1 Codec (Mixing)
 
 sound {
-	compatible = "renesas,rsrc-card";
-
-	card-name = "rsnd-ak4643";
-	format = "left_j";
-	bitclock-master = <&dpcmcpu>;
-	frame-master = <&dpcmcpu>;
+	compatible = "simple-scu-audio-card";
 
-	convert-rate = <48000>;  /* see audio_clk_a */
+	simple-audio-card,name = "rsnd-ak4643";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&dpcmcpu>;
+	simple-audio-card,frame-master = <&dpcmcpu>;
 
-	audio-prefix = "ak4642";
-	audio-routing = "ak4642 Playback", "DAI0 Playback",
+	simple-audio-card,prefix = "ak4642";
+	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
 			"ak4642 Playback", "DAI1 Playback";
 
 	dpcmcpu: cpu@0 {