Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...

8 files changed, 8 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index f98d4c5b5cca..296eb4536129 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -26,7 +26,7 @@ Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
     - pinctrl-names: Should contain only one value - "default".
 
 Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
     specified, the default value in Hz is 100000.
diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt
index 2b6693b972fb..80ff3dfb1f32 100644
--- a/Documentation/devicetree/bindings/leds/tca6507.txt
+++ b/Documentation/devicetree/bindings/leds/tca6507.txt
@@ -1,4 +1,4 @@
-LEDs conected to tca6507
+LEDs connected to tca6507
 
 Required properties:
 - compatible : should be : "ti,tca6507".
diff --git a/Documentation/devicetree/bindings/metag/meta-intc.txt b/Documentation/devicetree/bindings/metag/meta-intc.txt
index 8c47dcbfabc6..80994adab392 100644
--- a/Documentation/devicetree/bindings/metag/meta-intc.txt
+++ b/Documentation/devicetree/bindings/metag/meta-intc.txt
@@ -12,7 +12,7 @@ Required properties:
       handle 32 interrupt sources).
 
     - interrupt-controller: The presence of this property identifies the node
-      as an interupt controller. No property value shall be defined.
+      as an interrupt controller. No property value shall be defined.
 
     - #interrupt-cells: Specifies the number of cells needed to encode an
       interrupt source. The type shall be a <u32> and the value shall be 2.
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index bc50899e0c81..648d60eb9fd8 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -1,6 +1,6 @@
 * Atmel AT91 Pinmux Controller
 
-The AT91 Pinmux Controler, enables the IC
+The AT91 Pinmux Controller, enables the IC
 to share one PAD to several functional blocks. The sharing is done by
 multiplexing the PAD input/output signals. For each PAD there are up to
 8 muxing options (called periph modes). Since different modules require
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 8edc20e1b09e..2569866c692f 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -5,7 +5,7 @@ controller, and pinmux/control device.
 
 Required properties:
 - compatible: "brcm,bcm2835-gpio"
-- reg: Should contain the physical address of the GPIO module's registes.
+- reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
   second cell is used to specify optional parameters:
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 9a599d27bd75..0347d8350d94 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -2,7 +2,7 @@
 
 QNAP NAS devices have a microcontroller controlling the main power
 supply. This microcontroller is connected to UART1 of the Kirkwood and
-Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
+Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 9fd69a18b0ba..9e5e51d78868 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -28,7 +28,7 @@ Required properties:
     safe operating voltage).
 
     If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
-    property is specified, then all the eigth voltage values for the
+    property is specified, then all the eight voltage values for the
     'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index f575302e5173..33fd3543f3f8 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -6,7 +6,7 @@ The Samsung's usb 2.0 phy transceiver is used for controlling
 usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
 usb controllers across Samsung SOCs.
 TODO: Adding the PHY binding with controller(s) according to the under
-developement generic PHY driver.
+development generic PHY driver.
 
 Required properties: