Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from <linux/libfdt.h>
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...

56 files changed, 97 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index ccaaec6014bd..6c49db7f8ad2 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree.
 
 Example: adding device info in dtsi file
 
-adc: adc@12D10000 {
+adc: adc@12d10000 {
 	compatible = "samsung,exynos-adc-v1";
 	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
@@ -71,7 +71,7 @@ adc: adc@12D10000 {
 
 Example: adding device info in dtsi file for Exynos3250 with additional sclk
 
-adc: adc@126C0000 {
+adc: adc@126c0000 {
 	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
 	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
@@ -87,7 +87,7 @@ adc: adc@126C0000 {
 
 Example: Adding child nodes in dts file
 
-adc@12D10000 {
+adc@12d10000 {
 
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index e13459618581..469ac98ecf8f 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -72,7 +72,7 @@ Optional nodes:
         - compatible: only "samsung,secure-firmware" is currently supported
         - reg: address of non-secure SYSRAM used for communication with firmware
 
-	firmware@203F000 {
+	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x0203F000 0x1000>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
new file mode 100644
index 000000000000..05762b08a7bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32.txt
@@ -0,0 +1,9 @@
+STMicroelectronics STM32 Platforms Device Tree Bindings
+
+Each device tree must specify which STM32 SoC it uses,
+using one of the following compatible strings:
+
+  st,stm32f429
+  st,stm32f469
+  st,stm32f746
+  st,stm32h743
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index e3b13ea7d2ae..45e79172a646 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -120,3 +120,18 @@ e.g.
 While this property does not represent a real hardware, the address
 and the size are expressed in #address-cells and #size-cells,
 respectively, of the root node.
+
+linux,initrd-start and linux,initrd-end
+---------------------------------------
+
+These properties hold the physical start and end address of an initrd that's
+loaded by the bootloader. Note that linux,initrd-start is inclusive, but
+linux,initrd-end is exclusive.
+e.g.
+
+/ {
+	chosen {
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
index f1738b88c225..7441ed519f02 100644
--- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below.
 		#clock-cells = <1>;
 	};
 
-	cmu_dmc: clock-controller@105C0000 {
+	cmu_dmc: clock-controller@105c0000 {
 		compatible = "samsung,exynos3250-cmu-dmc";
 		reg = <0x105C0000 0x2000>;
 		#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
index 5496b2fac483..c79d31f7f66e 100644
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the
 		peri clock controller. Refer to the standard clock bindings for
 		information about 'clocks' and 'clock-names' property.
 
-	serial@12C00000 {
+	serial@12c00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 146 0>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
index c68b0d29b3d0..217beb27c30e 100644
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock
 	   controller. Refer to the standard clock bindings for information
 	   about 'clocks' and 'clock-names' property.
 
-	serial@12C20000 {
+	serial@12c20000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 51 0>;
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index c473dd38dd55..50d5897c9849 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below.
 Example 3: UART controller node that consumes the clock generated by the clock
 	   controller.
 
-	serial_0: serial@14C10000 {
+	serial_0: serial@14c10000 {
 		compatible = "samsung,exynos5433-uart";
 		reg = <0x14C10000 0x100>;
 		interrupts = <0 421 0>;
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
index 7de1a9674c70..6b458bb2440d 100644
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
@@ -75,7 +75,7 @@ Required properties:
 - clock-frequency: must be present in the i2c controller node.
 
 Example:
-atecc508a@C0 {
+atecc508a@c0 {
 	compatible = "atmel,atecc508a";
 	reg = <0xC0>;
 };
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
index fd459f00aa5a..aeaebd425d1f 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
@@ -20,7 +20,7 @@ Optional properties:
 
 Example : NoC Probe nodes in Device Tree are listed below.
 
-	nocp_mem0_0: nocp@10CA1000 {
+	nocp_mem0_0: nocp@10ca1000 {
 		compatible = "samsung,exynos5420-nocp";
 		reg = <0x10CA1000 0x200>;
 	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index ca5204b3bc21..2fff8b406f4c 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -54,7 +54,7 @@ Video interfaces:
 
 Example:
 
-	dsi@11C80000 {
+	dsi@11c80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;
diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
index 4c0caaf246c9..89826116628c 100644
--- a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
+++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
@@ -1,7 +1,7 @@
 Toshiba 8.9" WXGA (1280x768) TFT LCD panel
 
 Required properties:
-- compatible: should be "toshiba,lt089ac29000.txt"
+- compatible: should be "toshiba,lt089ac29000"
 - power-supply: as specified in the base binding
 
 This binding is compatible with the simple-panel binding, which is specified
diff --git a/Documentation/devicetree/bindings/display/st,stih4xx.txt b/Documentation/devicetree/bindings/display/st,stih4xx.txt
index a352ed30cd70..6778b3e7ad5b 100644
--- a/Documentation/devicetree/bindings/display/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/display/st,stih4xx.txt
@@ -119,7 +119,7 @@ Example:
 / {
 	...
 
-	vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+	vtg_main_slave: sti-vtg-main-slave@fe85a800 {
 		compatible	= "st,vtg";
 		reg		= <0xfe85A800 0x300>;
 		interrupts	= <GIC_SPI 175 IRQ_TYPE_NONE>;
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index aa7dbd565ad0..99ab5c4d331e 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -15,7 +15,7 @@ Optional properties:
 
 Example:
 
-	dma: dma-controller@801C0000 {
+	dma: dma-controller@801c0000 {
 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
 		reg = <0x801C0000 0x1000  0x40010000 0x800>;
 		reg-names = "base", "lcpa";
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
index 00611aceed3e..a25c87b650e5 100644
--- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt
 
 Example:
 
-	gpioa: gpio@FF140000 {
+	gpioa: gpio@ff140000 {
 		compatible = "abilis,tb10x-gpio";
 		interrupt-controller;
 		#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
index 854de130a971..78458adbf4b7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
@@ -27,7 +27,7 @@ Optional properties:
 
 Example:
 
-gpio1: stp@E100BB0 {
+gpio1: stp@e100bb0 {
 	compatible = "lantiq,gpio-stp-xway";
 	reg = <0xE100BB0 0x40>;
 	#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 802402f6cc5d..b5de08e3b1a2 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -290,7 +290,7 @@ pins 50..69.
 
 Example 2:
 
-	gpio_pio_i: gpio-controller@14B0 {
+	gpio_pio_i: gpio-controller@14b0 {
 		#gpio-cells = <2>;
 		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
 		reg = <0x1480 0x18>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index 248a155414c2..548a73cde796 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -54,7 +54,7 @@ Optional properties:
 
 
 Example:
-	i2c@12CA0000 {
+	i2c@12ca0000 {
 		compatible = "acme,some-i2c-device";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
index 70c054a9a997..60fe90d69f4e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
@@ -11,7 +11,7 @@ Required properties:
 
 Examples:
 
-lpi2c7: lpi2c7@40A50000 {
+lpi2c7: lpi2c7@40a50000 {
 	compatible = "fsl,imx8dv-lpi2c";
 	reg = <0x40A50000 0x10000>;
 	interrupt-parent = <&intc>;
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 5305e74e5742..4c5c0a82586d 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -45,7 +45,7 @@ Optional Properties specific to linux:
 
 
 Example:
-	keypad@100A0000 {
+	keypad@100a0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <173>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
index ac5dff412e25..f127a2117072 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -66,7 +66,7 @@ Example: An example of touchscreen node
 		reg = <0x180a6000 0xc30>;
 	};
 
-	touchscreen: touchscreen@180A6000 {
+	touchscreen: touchscreen@180a6000 {
 		compatible = "brcm,iproc-touchscreen";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index 85f068805dd8..b1682c80b490 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -56,7 +56,7 @@ Examples:
 		iommus = <&sysmmu_gsc0>;
 	};
 
-	sysmmu_gsc0: sysmmu@13E80000 {
+	sysmmu_gsc0: sysmmu@13e80000 {
 		compatible = "samsung,exynos-sysmmu";
 		reg = <0x13E80000 0x1000>;
 		interrupt-parent = <&combiner>;
diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
index 9b40c4925aa9..0ef372656a3e 100644
--- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -124,7 +124,7 @@ dsp {
 };
 
 /* AM33xx */
-mailbox: mailbox@480C8000 {
+mailbox: mailbox@480c8000 {
 	compatible = "ti,omap4-mailbox";
 	reg = <0x480C8000 0x200>;
 	interrupts = <77>;
diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
index c3b55b3ede8a..ebf0e3710cee 100644
--- a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
+++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
@@ -20,9 +20,9 @@ Required properties:
 		        order referring to the transfer path.
 - interrupt-names:	Contains interrupt names matching the rx transfer path
 			for a given SoC. Receive interrupts shall be of the
-			format: "rx_<QID>_<PID>".
+			format: "rx_<QID>".
 			For ti,k2g-message-manager, this shall contain:
-				"rx_005_002", "rx_057_002"
+				"rx_005", "rx_057"
 - interrupts:		Contains the interrupt information corresponding to
 			interrupt-names property.
 
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
index 6f3756da900f..e847291d4aff 100644
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ b/Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -23,7 +23,7 @@ Optional:
 
 Example:
 
-hdmicec: cec@100B0000 {
+hdmicec: cec@100b0000 {
 	compatible = "samsung,s5p-cec";
 	reg = <0x100B0000 0x200>;
 	interrupts = <0 114 0>;
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
index 2c85c4538a6d..21f31fdf5543 100644
--- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
+++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
@@ -62,7 +62,7 @@ For more details see description of the SPI busses bindings
 
 Example:
 
-i2c@138A000000 {
+i2c@138a000000 {
 	...
 	s5c73m3@3c {
 		compatible = "samsung,s5c73m3";
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
index 9592717f483f..190437a0c146 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
@@ -138,7 +138,7 @@ from the corresponding HW reg.
 
 Example for aemif, davinci nand and nor flash chip select shown below.
 
-memory-controller@21000A00 {
+memory-controller@21000a00 {
 	compatible = "ti,davinci-aemif";
 	#address-cells = <2>;
 	#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 136e0c2da44d..6245c9b1a68b 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -41,7 +41,7 @@ Optional properties (all):
 
 Example for I2C:
 
-i2c@12CA0000 {
+i2c@12ca0000 {
 	cros-ec@1e {
 		reg = <0x1e>;
 		compatible = "google,cros-ec-i2c";
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index fb11ae8b3b72..467cd7b147ce 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -67,10 +67,10 @@ logic applies to the "wp-inverted" property.
 CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs,
 specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of
 dedicated pins can be specified, using *-inverted properties. GPIO polarity can
-also be specified using the OF_GPIO_ACTIVE_LOW flag. This creates an ambiguity
+also be specified using the GPIO_ACTIVE_LOW flag. This creates an ambiguity
 in the latter case. We choose to use the XOR logic for GPIO CD and WP lines.
 This means, the two properties are "superimposed," for example leaving the
-OF_GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted
+GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted property
 property results in a double-inversion and actually means the "normal" line
 polarity is in effect.
 
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
index d0a37252eb22..6d60bc3063f5 100644
--- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
@@ -23,7 +23,7 @@ Optional subnodes:
 
 Example:
 
-	mlc: flash@200A8000 {
+	mlc: flash@200a8000 {
 		compatible = "nxp,lpc3220-mlc";
 		reg = <0x200A8000 0x11000>;
 		interrupts = <11 0>;
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 7cc15c96ea95..4cb4925a28ab 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -61,7 +61,7 @@ file.
 
 Examples:
 
-	mac: ethernet@4A100000 {
+	mac: ethernet@4a100000 {
 		compatible = "ti,cpsw";
 		reg = <0x4A100000 0x1000>;
 		interrupts = <55 0x4>;
@@ -91,7 +91,7 @@ Examples:
 	};
 
 (or)
-	mac: ethernet@4A100000 {
+	mac: ethernet@4a100000 {
 		compatible = "ti,cpsw";
 		ti,hwmods = "cpgmac0";
 		cpdma_channels = <8>;
diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
index 621156ca4ffd..e6527de80f10 100644
--- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
+++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt
@@ -21,7 +21,7 @@ file.
 
 Examples:
 
-	mdio: davinci_mdio@4A101000 {
+	mdio: davinci_mdio@4a101000 {
 		compatible = "ti,davinci_mdio";
 		reg = <0x4A101000 0x1000>;
 		bus_freq = <1000000>;
@@ -29,7 +29,7 @@ Examples:
 
 (or)
 
-	mdio: davinci_mdio@4A101000 {
+	mdio: davinci_mdio@4a101000 {
 		compatible = "ti,davinci_mdio";
 		ti,hwmods = "davinci_mdio";
 		bus_freq = <1000000>;
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index db74f0dc290c..594982c6b9f9 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -136,7 +136,7 @@ Clock Properties:
 
 Example:
 
-	ptp_clock@24E00 {
+	ptp_clock@24e00 {
 		compatible = "fsl,etsec-ptp";
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 149d8f7f86b0..cb33421184a0 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -41,6 +41,7 @@ Optional properties:
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
 	- "pcie_inbound_axi"
+- power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain
 
 Additional required properties for imx7d-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index cd13e6157088..57dfda8a7a1d 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -120,7 +120,7 @@ usb3phy@4a084400 {
 			"refclk";
 };
 
-sata_phy: phy@4A096000 {
+sata_phy: phy@4a096000 {
 	compatible = "ti,phy-pipe3-sata";
 	reg = <0x4A096000 0x80>, /* phy_rx */
 	      <0x4A096400 0x64>, /* phy_tx */
diff --git a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
index 2c11866221c2..c591b9cb5ba0 100644
--- a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
@@ -49,7 +49,7 @@ explained in Documentation/devicetree/bindings/gpio/gpio.txt.
 Example
 -------
 
-iomux: iomux@FF10601c {
+iomux: iomux@ff10601c {
 	compatible = "abilis,tb10x-iomux";
 	reg = <0xFF10601c 0x4>;
 	pctl_gpio_a: pctl-gpio-a {
@@ -59,7 +59,7 @@ iomux: iomux@FF10601c {
 		abilis,function = "uart0";
 	};
 };
-uart@FF100000 {
+uart@ff100000 {
 	compatible = "snps,dw-apb-uart";
 	reg = <0xFF100000 0x100>;
 	clock-frequency = <166666666>;
@@ -69,7 +69,7 @@ uart@FF100000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pctl_uart0>;
 };
-gpioa: gpio@FF140000 {
+gpioa: gpio@ff140000 {
 	compatible = "abilis,tb10x-gpio";
 	reg = <0xFF140000 0x1000>;
 	gpio-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
index 0326154c7925..a72dc3178179 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -152,7 +152,7 @@ resetn
 
 Example:
 --------
-pinctrl@18101C00 {
+pinctrl@18101c00 {
 	compatible = "img,pistachio-system-pinctrl";
 	reg = <0x18101C00 0x400>;
 
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
index 8e5216bcd748..4658f105fa09 100644
--- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -163,7 +163,7 @@ Valid values for xRX300 pin names:
 						io42-io43,io48-io61.
 
 Example:
-	gpio: pinmux@E100B10 {
+	gpio: pinmux@e100b10 {
 		compatible = "lantiq,danube-pinctrl";
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 231fa1db7c5e..afa8a18ea11a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -81,7 +81,7 @@ Examples:
 		reg = <0 0x10005000 0 0x1000>;
 	};
 
-	syscfg_pctl_b: syscfg_pctl_b@1020C020 {
+	syscfg_pctl_b: syscfg_pctl_b@1020c020 {
 		compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
 		reg = <0 0x1020C020 0 0x1000>;
 	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
index 641bc13983e1..ed6a414b2e10 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
@@ -223,37 +223,37 @@ lac-portals {
 		reg = <0x9000 0x1000>;
 	};
 
-	lportal10: lac-portal@A000 {
+	lportal10: lac-portal@a000 {
 		compatible = "fsl,interlaken-lac-portal-v1.0";
 		fsl,liodn = <0x20E>;
 		reg = <0xA000 0x1000>;
 	};
 
-	lportal11: lac-portal@B000 {
+	lportal11: lac-portal@b000 {
 		compatible = "fsl,interlaken-lac-portal-v1.0";
 		fsl,liodn = <0x20F>;
 		reg = <0xB000 0x1000>;
 	};
 
-	lportal12: lac-portal@C000 {
+	lportal12: lac-portal@c000 {
 		compatible = "fsl,interlaken-lac-portal-v1.0";
 		fsl,liodn = <0x210>;
 		reg = <0xC000 0x1000>;
 	};
 
-	lportal13: lac-portal@D000 {
+	lportal13: lac-portal@d000 {
 		compatible = "fsl,interlaken-lac-portal-v1.0";
 		fsl,liodn = <0x211>;
 		reg = <0xD000 0x1000>;
 	};
 
-	lportal14: lac-portal@E000 {
+	lportal14: lac-portal@e000 {
 		compatible = "fsl,interlaken-lac-portal-v1.0";
 		fsl,liodn = <0x212>;
 		reg = <0xE000 0x1000>;
 	};
 
-	lportal15: lac-portal@F000 {
+	lportal15: lac-portal@f000 {
 		compatible = "fsl,interlaken-lac-portal-v1.0";
 		fsl,liodn = <0x213>;
 		reg = <0xF000 0x1000>;
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
index 3944ee3e731e..5ddb8500a929 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
@@ -10,7 +10,7 @@ Required properties:
 - clocks:		Must contain an entry for peripheral clock.
 
 Example:
-	vrefbuf: regulator@58003C00 {
+	vrefbuf: regulator@58003c00 {
 		compatible = "st,stm32-vrefbuf";
 		reg = <0x58003C00 0x8>;
 		clocks = <&rcc VREF_CK>;
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
index 5b78591aaa46..3acbd309ab9d 100644
--- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -8,7 +8,7 @@ Required properties:
 
 Example:
 
-asc1: serial@E100C00 {
+asc1: serial@e100c00 {
 	compatible = "lantiq,asc";
 	reg = <0xE100C00 0x400>;
 	interrupt-parent = <&icu0>;
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-out.txt b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
index 0159415b3338..6b0ee9b7e11b 100644
--- a/Documentation/devicetree/bindings/sound/img,i2s-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
@@ -35,7 +35,7 @@ Optional Properties:
 
 Example:
 
-i2s_out: i2s-out@18100A00 {
+i2s_out: i2s-out@18100a00 {
 	compatible = "img,i2s-out";
 	reg = <0x18100A00 0x200>;
 	interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,parallel-out.txt b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
index a3015d2a06e0..37a3f94cc126 100644
--- a/Documentation/devicetree/bindings/sound/img,parallel-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
@@ -29,7 +29,7 @@ Optional Properties:
 
 Example:
 
-parallel_out: parallel-out@18100C00 {
+parallel_out: parallel-out@18100c00 {
 	compatible = "img,parallel-out";
 	reg = <0x18100C00 0x100>;
 	interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
index aab9a81f7e13..f7ea8c87bf34 100644
--- a/Documentation/devicetree/bindings/sound/img,spdif-in.txt
+++ b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
@@ -29,7 +29,7 @@ Optional Properties:
 
 Example:
 
-spdif_in: spdif-in@18100E00 {
+spdif_in: spdif-in@18100e00 {
 	compatible = "img,spdif-in";
 	reg = <0x18100E00 0x100>;
 	interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
index 470a5191e101..413ed8b01870 100644
--- a/Documentation/devicetree/bindings/sound/img,spdif-out.txt
+++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
@@ -29,7 +29,7 @@ Optional Properties:
 
 Example:
 
-spdif_out: spdif-out@18100D00 {
+spdif_out: spdif-out@18100d00 {
 	compatible = "img,spdif-out";
 	reg = <0x18100D00 0x100>;
 	interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 9c1ee52fed5b..4d51f3f5ea98 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -51,7 +51,7 @@ Optional properties:
 
 Example:
 
-	sti_uni_player1: sti-uni-player@8D81000 {
+	sti_uni_player1: sti-uni-player@8d81000 {
 		compatible = "st,stih407-uni-player-hdmi";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -63,7 +63,7 @@ Example:
 		st,tdm-mode = <1>;
 	};
 
-	sti_uni_player2: sti-uni-player@8D82000 {
+	sti_uni_player2: sti-uni-player@8d82000 {
 		compatible = "st,stih407-uni-player-pcm-out";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -74,7 +74,7 @@ Example:
 		dma-names = "tx";
 	};
 
-	sti_uni_player3: sti-uni-player@8D85000 {
+	sti_uni_player3: sti-uni-player@8d85000 {
 		compatible = "st,stih407-uni-player-spdif";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -85,7 +85,7 @@ Example:
 		dma-names = "tx";
 	};
 
-	sti_uni_reader1: sti-uni-reader@8D84000 {
+	sti_uni_reader1: sti-uni-reader@8d84000 {
 		compatible = "st,stih407-uni-reader-hdmi";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 1925277bfc1e..9f5b4c7c0c08 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -68,7 +68,7 @@ SPI_SOMI/SIMO+-----------------+                           +-----------
 Example of a NOR flash slave device (n25q032) connected to DaVinci
 SPI controller device over the SPI bus.
 
-spi0:spi@20BF0000 {
+spi0:spi@20bf0000 {
 	#address-cells			= <1>;
 	#size-cells			= <0>;
 	compatible			= "ti,dm6446-spi";
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
index 6069b95a883d..ce3230c8e28d 100644
--- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -16,7 +16,7 @@ Optional properties:
 Example:
 
 
-spi: spi@E100800 {
+spi: spi@e100800 {
 	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
 	reg = <0xE100800 0x100>;
 	interrupt-parent = <&icu0>;
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 9b4c7b017495..1b596fd38dc4 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC):
 
 Example 1):
 
-	tmu@100C0000 {
+	tmu@100c0000 {
 		compatible = "samsung,exynos4412-tmu";
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 44d7cb2cb2c0..1719d47a5e2f 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -252,7 +252,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0000ED00 {
+	bandgap0: bandgap@0000ed00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -330,7 +330,7 @@ ocp {
 	/*
 	 * A simple IC with several bandgap temperature sensors.
 	 */
-	bandgap0: bandgap@0000ED00 {
+	bandgap0: bandgap@0000ed00 {
 		...
 		#thermal-sensor-cells = <1>;
 	};
@@ -458,7 +458,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0000ED00 {
+	bandgap0: bandgap@0000ed00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.txt b/Documentation/devicetree/bindings/timer/renesas,tpu.txt
index f8b25897fb31..1d46f9de4feb 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tpu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tpu.txt
@@ -1,4 +1,4 @@
-* Renesas H8/300 Timer Pluse Unit
+* Renesas H8/300 Timer Pulse Unit
 
 The TPU is a 16bit timer/counter with configurable clock inputs and
 programmable compare match.
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
index 167d5dab9f64..8f78640ad64c 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
@@ -51,7 +51,7 @@ Example 2: In this example, the timer interrupts are connected to two separate
 	   interrupt controllers. Hence, an interrupt-map is created to map
 	   the interrupts to the respective interrupt controllers.
 
-	mct@101C0000 {
+	mct@101c0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
 		interrupt-parent = <&mct_map>;
diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
index 5f3143f97098..2e3740f98c41 100644
--- a/Documentation/devicetree/bindings/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/trivial-devices.txt
@@ -63,6 +63,7 @@ fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
+infineon,tlv493d-a1b6	Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
 isil,isl1208		Intersil ISL1208 Low Power RTC with Battery Backed SRAM
 isil,isl1218		Intersil ISL1218 Low Power RTC with Battery Backed SRAM
 isil,isl12022		Intersil ISL12022 Real-time Clock
@@ -151,6 +152,7 @@ national,lm85		Temperature sensor with integrated fan control
 national,lm92		±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
 nuvoton,npct501		i2c trusted platform module (TPM)
 nuvoton,npct601		i2c trusted platform module (TPM2)
+nuvoton,w83773g		Nuvoton Temperature Sensor
 nxp,pca9556		Octal SMBus and I2C registered interface
 nxp,pca9557		8-bit I2C-bus and SMBus I/O port with reset
 nxp,pcf2127		Real-time clock
diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
index 556d06c17c92..4b76bec62af9 100644
--- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -10,7 +10,7 @@ Optional properties:
 
 Example:
 
-	watchdog@4003C000 {
+	watchdog@4003c000 {
 		compatible = "nxp,pnx4008-wdt";
 		reg = <0x4003C000 0x1000>;
 		timeout-sec = <10>;
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 1f6e101e299a..46dcb48e75b4 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -25,7 +25,7 @@ Optional properties:
 
 Example:
 
-watchdog@101D0000 {
+watchdog@101d0000 {
 	compatible = "samsung,exynos5250-wdt";
 	reg = <0x101D0000 0x100>;
 	interrupts = <0 42 0>;