diff options
| author | Claudiu Beznea <claudiu.beznea@microchip.com> | 2019-02-07 09:24:57 +0000 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2019-02-08 13:06:16 +0100 |
| commit | 1d741f2e977d7783cd706d6759e29cf36be9d412 (patch) | |
| tree | ac85013b393fa939f07b0a1ba462cf2de22e0143 /Documentation/devicetree/bindings | |
| parent | a2fcb1ce88409497b6e8b0f45a41052d5f07e508 (diff) | |
dt-bindings: add documentation for banks
Add documentation for at91 pin controller banks.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3e23fece99da..40e33dfc36fd 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -116,6 +116,18 @@ Some requirements for using atmel,at91rm9200-pinctrl binding: configurations by referring to the phandle of that pin configuration node. 4. The gpio controller must be describe in the pinctrl simple-bus. +For each bank the required properties are: +- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" +- reg: physical base address and length of the controller's registers +- interrupts: interrupt outputs from the controller +- interrupt-controller: marks the device node as an interrupt controller +- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt + for more details. +- gpio-controller +- #gpio-cells: should be 2; the first cell is the GPIO number and the second + cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>. +- clocks: bank clock + Examples: pinctrl@fffff400 { @@ -125,6 +137,17 @@ pinctrl@fffff400 { compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; reg = <0xfffff400 0x600>; + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + atmel,mux-mask = < /* A B */ 0xffffffff 0xffc00c3b /* pioA */ |