Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal SoC updates from Zhang Rui:
 "Thermal SoC management updates:

   - imx thermal driver now supports i.MX7 thermal sensor (Anson Huang)

   - exynos thermal driver dropped support for exynos 5440 (Krzysztof
     Kozlowski)

   - rcar_thermal now supports r8a77995 (Yoshihiro Kaneko)

   - rcar_gen3_thermal now supports r8a77965 (Niklas Söderlund)

   - qcom-spmi-temp-alarm now supports GEN2 PMIC peripherals (David
     Collins)

   - uniphier thermal now supports UniPhier PXs3 (Kunihiko Hayashi)

   - mediatek thermal now supports MT7622 SoC (Sean Wang)

   - considerable refactoring of exynos driver (Bartlomiej
     Zolnierkiewicz)

   - small fixes all over the place on different drivers"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (50 commits)
  thermal: qcom: tsens: Allow number of sensors to come from DT
  thermal: tegra: soctherm: add const to struct thermal_cooling_device_ops
  thermal: exynos: Reduce severity of too early temperature read
  thermal: imx: Switch to SPDX identifier
  thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals
  thermal: ti-soc-thermal: fix incorrect entry in omap5430_adc_to_temp[]
  thermal: rcar_thermal: add r8a77995 support
  dt-bindings: thermal: rcar-thermal: add R8A77995 support
  thermal: mediatek: use of_device_get_match_data()
  thermal: exynos: remove trip reporting to user-space
  thermal: exynos: remove unused defines for Exynos5433
  thermal: exynos: cleanup code for enabling threshold interrupts
  thermal: exynos: check return values of ->get_trip_[temp, hyst] methods
  thermal: exynos: move trips setting to exynos_tmu_initialize()
  thermal: exynos: set trips in ascending order in exynos7_tmu_initialize()
  thermal: exynos: do not use trips structure directly in ->tmu_initialize
  thermal: exynos: add exynos*_tmu_set_[trip,hyst]() helpers
  thermal: exynos: move IRQs clearing to exynos_tmu_initialize()
  thermal: exynos: clear IRQs later in exynos4412_tmu_initialize()
  thermal: exynos: make ->tmu_initialize method void
  ...

7 files changed, 18 insertions, 18 deletions

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index b957acff57aa..ad648d93d961 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -12,7 +12,6 @@
 	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
 			Exynos5420 (Must pass triminfo base and triminfo clock)
                "samsung,exynos5433-tmu"
-	       "samsung,exynos5440-tmu"
 	       "samsung,exynos7-tmu"
 - interrupt-parent : The phandle for the interrupt controller
 - reg : Address range of the thermal registers. For soc's which has multiple
@@ -68,18 +67,7 @@ Example 1):
 		#thermal-sensor-cells = <0>;
 	};
 
-Example 2):
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock 21>;
-		clock-names = "tmu_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
+Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register")
 	tmu_cpu2: tmu@10068000 {
 		compatible = "samsung,exynos5420-tmu-ext-triminfo";
 		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 379eb763073e..823e4176eef8 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -1,8 +1,13 @@
 * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
 
 Required properties:
-- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
-  i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
+- compatible : must be one of following:
+  - "fsl,imx6q-tempmon" for i.MX6Q,
+  - "fsl,imx6sx-tempmon" for i.MX6SX,
+  - "fsl,imx7d-tempmon" for i.MX7S/D.
+- interrupts : the interrupt output of the controller:
+  i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold,
+  i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
   when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
   is higher than panic threshold, system will auto reboot by SRC module.
 - fsl,tempmon : phandle pointer to system controller that contains TEMPMON
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 0d73ea5e9c0c..41d6a443ad66 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -12,6 +12,7 @@ Required properties:
   - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
   - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
   - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
+  - "mediatek,mt7622-thermal" : For MT7622 SoC
 - reg: Address range of the thermal controller
 - interrupts: IRQ for the thermal controller
 - clocks, clock-names: Clocks needed for the thermal controller. required
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 292ed89d900b..06195e8f35e2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,6 +8,7 @@ Required properties:
 
 - reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index 39e7d4e61a63..cfa154bb0fa7 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -9,6 +9,7 @@ Required properties:
 			  Examples with soctypes are:
 			    - "renesas,r8a7795-thermal" (R-Car H3)
 			    - "renesas,r8a7796-thermal" (R-Car M3-W)
+			    - "renesas,r8a77965-thermal" (R-Car M3-N)
 - reg			: Address ranges of the thermal registers. Each sensor
 			  needs one address range. Sorting must be done in
 			  increasing order according to datasheet, i.e.
@@ -18,7 +19,7 @@ Required properties:
 
 Optional properties:
 
-- interrupts           : interrupts routed to the TSC (3 for H3 and M3-W)
+- interrupts           : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
 - power-domain		: Must contain a reference to the power domain. This
 			  property is mandatory if the thermal sensor instance
 			  is part of a controllable power domain.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 349e635f2d87..67c563f1b4c4 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -3,7 +3,8 @@
 Required properties:
 - compatible		: "renesas,thermal-<soctype>",
 			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
-			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
+			   "renesas,rcar-thermal" (without thermal-zone) as
+                           fallback except R-Car D3.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7743" (RZ/G1M)
@@ -12,13 +13,15 @@ Required properties:
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
 			    - "renesas,thermal-r8a7792" (R-Car V2H)
 			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a77995" (R-Car D3)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
 
 Option properties:
 
-- interrupts		: use interrupt
+- interrupts		: If present should contain 3 interrupts for
+                          R-Car D3 or 1 interrupt otherwise.
 
 Example (non interrupt support):
 
diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
index 686c0b42ed3f..ceb92a95727a 100644
--- a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible :
   - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC
   - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC
+  - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC
 - interrupts : IRQ for the temperature alarm
 - #thermal-sensor-cells : Should be 0. See ./thermal.txt for details.