Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup

- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
  driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup

* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
  imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
  gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
  gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
  imx-drm: encoder prepare/mode_set must use adjusted mode
  imx-drm: ipuv3-crtc: Implement mode_fixup
  drm_modes: add drm_display_mode_to_videomode
  gpu: ipu-di: remove some non-functional code
  gpu: ipu-di: Add ipu_di_adjust_videomode()
  drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
  drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
  drm: bridge/dw_hdmi: add rockchip rk3288 support
  dt-bindings: Add documentation for rockchip dw hdmi
  drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
  drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
  drm: bridge/dw_hdmi: add mode_valid support
  drm: bridge/dw_hdmi: add support for multi-byte register width access
  dt-bindings: add document for dw_hdmi
  drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
  drm: imx: imx-hdmi: split phy configuration to platform driver
  drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
  ...

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
new file mode 100644
index 000000000000..668091f27674
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
@@ -0,0 +1,46 @@
+Rockchip specific extensions to the Synopsys Designware HDMI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-dw-hdmi";
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle to hdmi iahb and isfr clocks.
+- clock-names: should be "iahb" "isfr"
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- interrupts: HDMI interrupt number
+- ports: contain a port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. For
+  vopb,set the reg = <0> and set the reg = <1> for vopl.
+- reg-io-width: the width of the reg:1,4, the value should be 4 on
+  rk3288 platform
+
+Optional properties
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+hdmi: hdmi@ff980000 {
+	compatible = "rockchip,rk3288-dw-hdmi";
+	reg = <0xff980000 0x20000>;
+	reg-io-width = <4>;
+	ddc-i2c-bus = <&i2c5>;
+	rockchip,grf = <&grf>;
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+	clock-names = "iahb", "isfr";
+	status = "disabled";
+	ports {
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vopb: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vopb_out_hdmi>;
+			};
+			hdmi_in_vopl: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vopl_out_hdmi>;
+			};
+		};
+	};
+};