diff options
| author | Ricardo Silva <rjpdasilva@gmail.com> | 2018-04-11 22:42:57 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2018-05-02 14:36:08 +0200 |
| commit | 574e69953d73f86dcaca34ffc8098e82a62e3746 (patch) | |
| tree | 14d8dcb47fcdadfa23d0c0f6c3478bc8b3807970 /Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | |
| parent | e61941d1e972a486660a435cc34f5724c0271a90 (diff) | |
dt-bindings: pinctrl: mcp23s08: Clarify gpiospec flags cell usage
The pinctrl-mcp23s08 driver doesn't provide a specific gpiospec
of_xlate() function, causing the gpiolib-of's of_gpio_simple_xlate()
function to be used instead, which takes the gpiospec's second cell as
the flags specifier according to 'include/dt-bindings/gpio/gpio.h'.
The pinctrl-mcp23s08 bindings document was mentioning that the flags
were unused, which is not accurate because values in that second cell
are indeed used by the gpiolib-of's of_gpio_simple_xlate() for
configuring the gpio (e.g. its polarity).
This way, replace the "flags currently unused" reference in the
dt-bindings document with references to the appropriate files specifying
the possible flag values and gpiospec description.
CC: devicetree@vger.kernel.org
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index a5a8322a31bd..a677145ae6d1 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -18,7 +18,9 @@ Required properties: removed. - #gpio-cells : Should be two. - first cell is the pin number - - second cell is used to specify flags. Flags are currently unused. + - second cell is used to specify flags as described in + 'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by + 'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW). - gpio-controller : Marks the device node as a GPIO controller. - reg : For an address on its bus. I2C uses this a the I2C address of the chip. SPI uses this to specify the chipselect line which the chip is |