diff options
author | Maxime Ripard <maxime.ripard@bootlin.com> | 2019-06-27 17:31:50 +0200 |
---|---|---|
committer | Rob Herring <robh@kernel.org> | 2019-06-28 13:27:46 -0600 |
commit | 7db3545aef5fae02a9ccb4b1e37e72900d7101bb (patch) | |
tree | e144622682707c5f8f0e1287f2738f82e600b1e6 /Documentation/devicetree/bindings/net/snps,dwmac.yaml | |
parent | 7a47b908156c94c2bd3ab8dc412d1983d92cca40 (diff) |
dt-bindings: net: stmmac: Convert the binding to a schemas
Switch the STMMAC / Synopsys DesignWare MAC controller binding to a YAML
schema to enable the DT validation.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/net/snps,dwmac.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/net/snps,dwmac.yaml | 390 |
1 files changed, 390 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml new file mode 100644 index 000000000000..f2a5bae7fcfc --- /dev/null +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -0,0 +1,390 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/snps,dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MAC Device Tree Bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Giuseppe Cavallaro <peppe.cavallaro@st.com> + - Jose Abreu <joabreu@synopsys.com> + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + contains: + enum: + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + # Deprecated + - st,spear600-gmac + + required: + - compatible + +properties: + + # We need to include all the compatibles from schemas that will + # include that schemas, otherwise compatible won't validate for + # those. + compatible: + contains: + enum: + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + items: + - description: Combined signal for various interrupt events + - description: The interrupt to manage the remote wake-up packet detection + - description: The interrupt that occurs when Rx exits the LPI state + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + - const: macirq + - const: eth_wake_irq + - const: eth_lpi + + clocks: + minItems: 1 + maxItems: 3 + items: + - description: GMAC main clock + - description: Peripheral registers interface clock + - description: + PTP reference clock. This clock is used for programming the + Timestamp Addend Register. If not passed then the system + clock will be used and this is fine on some platforms. + + clock-names: + additionalItems: true + contains: + enum: + - stmmaceth + - pclk + - ptp_ref + + resets: + maxItems: 1 + description: + MAC Reset signal. + + reset-names: + const: stmmaceth + + snps,axi-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + AXI BUS Mode parameters. Phandle to a node that can contain the + following properties + * snps,lpi_en, enable Low Power Interface + * snps,xit_frm, unlock on WoL + * snps,wr_osr_lmt, max write outstanding req. limit + * snps,rd_osr_lmt, max read outstanding req. limit + * snps,kbbe, do not cross 1KiB boundary. + * snps,blen, this is a vector of supported burst length. + * snps,fb, fixed-burst + * snps,mb, mixed-burst + * snps,rb, rebuild INCRx Burst + + snps,mtl-rx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple RX Queues parameters. Phandle to a node that can + contain the following properties + * snps,rx-queues-to-use, number of RX queues to be used in the + driver + * Choose one of these RX scheduling algorithms + * snps,rx-sched-sp, Strict priority + * snps,rx-sched-wsp, Weighted Strict priority + * For each RX queue + * Choose one of these modes + * snps,dcb-algorithm, Queue to be enabled as DCB + * snps,avb-algorithm, Queue to be enabled as AVB + * snps,map-to-dma-channel, Channel to map + * Specifiy specific packet routing + * snps,route-avcp, AV Untagged Control packets + * snps,route-ptp, PTP Packets + * snps,route-dcbcp, DCB Control Packets + * snps,route-up, Untagged Packets + * snps,route-multi-broad, Multicast & Broadcast Packets + * snps,priority, RX queue priority (Range 0x0 to 0xF) + + snps,mtl-tx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple TX Queues parameters. Phandle to a node that can + contain the following properties + * snps,tx-queues-to-use, number of TX queues to be used in the + driver + * Choose one of these TX scheduling algorithms + * snps,tx-sched-wrr, Weighted Round Robin + * snps,tx-sched-wfq, Weighted Fair Queuing + * snps,tx-sched-dwrr, Deficit Weighted Round Robin + * snps,tx-sched-sp, Strict priority + * For each TX queue + * snps,weight, TX queue weight (if using a DCB weight + algorithm) + * Choose one of these modes + * snps,dcb-algorithm, TX queue will be working in DCB + * snps,avb-algorithm, TX queue will be working in AVB + [Attention] Queue 0 is reserved for legacy traffic + and so no AVB is available in this queue. + * Configure Credit Base Shaper (if AVB Mode selected) + * snps,send_slope, enable Low Power Interface + * snps,idle_slope, unlock on WoL + * snps,high_credit, max write outstanding req. limit + * snps,low_credit, max read outstanding req. limit + * snps,priority, TX queue priority (Range 0x0 to 0xF) + + snps,reset-gpio: + maxItems: 1 + description: + PHY Reset GPIO + + snps,reset-active-low: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that the PHY Reset is active low + + snps,reset-delays-us: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - minItems: 3 + maxItems: 3 + description: + Triplet of delays. The 1st cell is reset pre-delay in micro + seconds. The 2nd cell is reset pulse in micro seconds. The 3rd + cell is reset post-delay in micro seconds. + + snps,aal: + $ref: /schemas/types.yaml#definitions/flag + description: + Use Address-Aligned Beats + + snps,fixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the fixed burst mode + + snps,mixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the mixed burst mode + + snps,force_thresh_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the threshold mode for both tx and rx + + snps,force_sf_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the Store and Forward mode for both tx and + rx. This flag is ignored if force_thresh_dma_mode is set. + + snps,en-tx-lpi-clockgating: + $ref: /schemas/types.yaml#definitions/flag + description: + Enable gating of the MAC TX clock during TX low-power mode + + snps,multicast-filter-bins: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of multicast filter hash bins supported by this device + instance + + snps,perfect-filter-entries: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of perfect filter entries supported by this device + instance + + snps,ps-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Port selection speed that can be passed to the core when PCS + is supported. For example, this is used in case of SGMII and + MAC2MAC connection. + + mdio: + type: object + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: snps,dwmac-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phy-connection-type + +dependencies: + snps,reset-active-low: ["snps,reset-gpio"] + snps,reset-delay-us: ["snps,reset-gpio"] + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + properties: + snps,pbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Programmable Burst Length (tx and rx) + + snps,txpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + + snps,rxpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + + - if: + properties: + compatible: + contains: + enum: + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + snps,tso: + $ref: /schemas/types.yaml#definitions/flag + description: + Enables the TSO feature otherwise it will be managed by + MAC HW capability register. + +examples: + - | + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 0 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + snps,priority = <0x1>; + }; + }; + + gmac0: ethernet@e0800000 { + compatible = "snps,dwxgmac-2.10", "snps,dwxgmac"; + reg = <0xe0800000 0x8000>; + interrupt-parent = <&vic1>; + interrupts = <24 23 22>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + max-frame-size = <3800>; + phy-connection-type = "gmii"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <16384>; + tx-fifo-depth = <16384>; + clocks = <&clock>; + clock-names = "stmmaceth"; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... |