diff options
| author | Clément Perrochaud <clement.perrochaud@nxp.com> | 2015-03-09 11:12:05 +0100 |
|---|---|---|
| committer | Samuel Ortiz <sameo@linux.intel.com> | 2015-03-26 11:21:41 +0100 |
| commit | 6be88670fc59d50426f90f734a36b90e1de7d148 (patch) | |
| tree | 8296eaff5b2747937b4239fcee58f5fa380926dc /Documentation/devicetree/bindings/net/nfc/nxp-nci.txt | |
| parent | dece45855a8b0d1dcf48eb01d0822070ded6a4c8 (diff) | |
NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver
Add a module to the NXP-NCI driver to support NFC controllers with an
I2C control interface, such as the NPC100.
Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc/nxp-nci.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/nfc/nxp-nci.txt | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt new file mode 100644 index 000000000000..5b6cd9b3f628 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -0,0 +1,35 @@ +* NXP Semiconductors NXP NCI NFC Controllers + +Required properties: +- compatible: Should be "nxp,nxp-nci-i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- enable-gpios: Output GPIO pin used for enabling/disabling the chip +- firmware-gpios: Output GPIO pin used to enter firmware download mode + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): + +&i2c2 { + + status = "okay"; + + npc100: npc100@29 { + + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x29>; + clock-frequency = <100000>; + + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_HIGH>; + + enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + }; +}; |