dt-bindings: spi: QuadSPI driver for Atmel SAMA5D2

Atmel SAMA5D2 QuadSPI driver was moved from mtd to spi subsystem,
this change is just moving DT-binding documentation.

Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 0 insertions, 31 deletions

diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
deleted file mode 100644
index b93c1e2f25dd..000000000000
--- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Atmel Quad Serial Peripheral Interface (QSPI)
-
-Required properties:
-- compatible:     Should be "atmel,sama5d2-qspi".
-- reg:            Should contain the locations and lengths of the base registers
-                  and the mapped memory.
-- reg-names:      Should contain the resource reg names:
-                  - qspi_base: configuration register address space
-                  - qspi_mmap: memory mapped address space
-- interrupts:     Should contain the interrupt for the device.
-- clocks:         The phandle of the clock needed by the QSPI controller.
-- #address-cells: Should be <1>.
-- #size-cells:    Should be <0>.
-
-Example:
-
-spi@f0020000 {
-	compatible = "atmel,sama5d2-qspi";
-	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
-	reg-names = "qspi_base", "qspi_mmap";
-	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
-	clocks = <&spi0_clk>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0_default>;
-
-	m25p80@0 {
-		...
-	};
-};