Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "This series contain:
   - new i2c video drivers: ml86v7667 (video decoder),
                            ths8200 (video encoder)
   - a new video driver for EasyCap cards based on Fushicai USBTV007
   - Improved support for OF and embedded systems, with V4L2 async
     initialization and a better support for clocks
   - API cleanups on the ioctls used by the v4l2 debug tool
   - Lots of cleanups
   - As usual, several driver improvements and new cards additions
   - Revert two changesets that change the minimal symbol rate for
     stv0399, as request by Manu
   - Update MAINTAINERS and other files to point to my new e-mail"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (378 commits)
  MAINTAINERS & ABI: Update to point to my new email
  [media] stb0899: restore minimal rate to 5Mbauds
  [media] exynos4-is: Correct colorspace handling at FIMC-LITE
  [media] exynos4-is: Set valid initial format on FIMC.n subdevs
  [media] exynos4-is: Set valid initial format on FIMC-IS-ISP subdev pads
  [media] exynos4-is: Fix format propagation on FIMC-IS-ISP subdev
  [media] exynos4-is: Set valid initial format at FIMC-LITE
  [media] exynos4-is: Fix format propagation on FIMC-LITE.n subdevs
  [media] MAINTAINERS: Update S5P/Exynos FIMC driver entry
  [media] Documentation: Update driver's directory in video4linux/fimc.txt
  [media] exynos4-is: Change fimc-is firmware file names
  [media] exynos4-is: Add support for Exynos5250 MIPI-CSIS
  [media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver
  [media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platforms
  [media] media: i2c: tvp514x: remove manual setting of subdev name
  [media] media: i2c: tvp7002: remove manual setting of subdev name
  [media] mem2mem: set missing v4l2_dev pointer
  [media] wl128x: add missing struct v4l2_device
  [media] tvp514x: Fix init seqeunce
  [media] saa7134: Fix sparse warnings by adding __user annotation
  ...

2 files changed, 84 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
new file mode 100644
index 000000000000..cb60443ff78f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
@@ -0,0 +1,40 @@
+* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 2592H x 1944V. It is programmable through a simple
+two-wire serial interface.
+
+Required Properties:
+- compatible: value should be either one among the following
+	(a) "aptina,mt9p031" for mt9p031 sensor
+	(b) "aptina,mt9p031m" for mt9p031m sensor
+
+- input-clock-frequency: Input clock frequency.
+
+- pixel-clock-frequency: Pixel clock frequency.
+
+Optional Properties:
+- reset-gpios: Chip reset GPIO
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		mt9p031@5d {
+			compatible = "aptina,mt9p031";
+			reg = <0x5d>;
+			reset-gpios = <&gpio3 30 0>;
+
+			port {
+				mt9p031_1: endpoint {
+					input-clock-frequency = <6000000>;
+					pixel-clock-frequency = <96000000>;
+				};
+			};
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
new file mode 100644
index 000000000000..46752cc71f2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,44 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible : value should be either one among the following
+	(a) "ti,tvp5146" for tvp5146 decoder.
+	(b) "ti,tvp5146m2" for tvp5146m2 decoder.
+	(c) "ti,tvp5147" for tvp5147 decoder.
+	(d) "ti,tvp5147m1" for tvp5147m1 decoder.
+
+- hsync-active: HSYNC Polarity configuration for endpoint.
+
+- vsync-active: VSYNC Polarity configuration for endpoint.
+
+- pclk-sample: Clock polarity of the endpoint.
+
+For further reading on port node refer to Documentation/devicetree/bindings/
+media/video-interfaces.txt.
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		tvp514x@5c {
+			compatible = "ti,tvp5146";
+			reg = <0x5c>;
+
+			port {
+				tvp514x_1: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					pclk-sample = <0>;
+				};
+			};
+		};
+		...
+	};