Documentation: devicetree: fix reference to legacy wakeup properties

This patch marks all the reference to the legacy wakeup bindings
and replaces them with the standard "wakeup-source" property.

All these legacy property are also listed under a separate section in
the generic wakeup-source binding document.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

7 files changed, 10 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index df8b1279491d..33a1638b61d6 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -65,6 +65,7 @@ Optional properties:
 	pendown-gpio			GPIO handle describing the pin the !PENIRQ
 					line is connected to.
 	wakeup-source			use any event on touchscreen as wakeup event.
+					(Legacy property support: "linux,wakeup")
 
 
 Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
@@ -86,6 +87,6 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
 			ti,x-plate-ohms = /bits/ 16 <40>;
 			ti,pressure-max = /bits/ 16 <255>;
 
-			linux,wakeup;
+			wakeup-source;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 5b91f5a3bd5c..d698475a9262 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -21,6 +21,7 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- wakeup-source: Boolean, button can wake-up the system.
+			 (Legacy property supported: "gpio-key,wakeup")
 
 Example nodes:
 
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index 072bf7573c37..cf1333d1dd52 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -24,6 +24,7 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- wakeup-source: Boolean, button can wake-up the system.
+			 (Legacy property supported: "gpio-key,wakeup")
 	- linux,can-disable: Boolean, indicates that button is connected
 	  to dedicated (not shared) interrupt which can be disabled to
 	  suppress events from the button.
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index 4d86059c370c..d0ea09ba249f 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -20,6 +20,7 @@ Required Properties:
 Optional Properties:
 - linux,no-autorepeat:	do no enable autorepeat feature.
 - wakeup-source:	use any event on keypad as wakeup event.
+			(Legacy property supported: "linux,wakeup")
 - debounce-delay-ms:	debounce interval in milliseconds
 - col-scan-delay-us:	delay, measured in microseconds, that is needed
 			before we can scan keypad after activating column gpio
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 0382b8bd69c6..1faa7292e21f 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -29,7 +29,8 @@ matrix-keyboard bindings:
 - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
 - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
 - nvidia,ghost-filter: enable ghost filtering for this device
-- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+		 (Legacy property supported: "nvidia,wakeup-source")
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
index ee6215681182..4a9dc6ba96b1 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -37,6 +37,7 @@ PROPERTIES
 	Usage: optional
 	Value type: <bool>
 	Definition: use any event on keypad as wakeup event.
+		    (Legacy property supported: "linux,keypad-wakeup")
 
 - keypad,num-rows:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index 863e77f619dc..5305e74e5742 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -38,6 +38,7 @@ Required Board Specific Properties:
 
 Optional Properties:
 - wakeup-source: use any event on keypad as wakeup event.
+		 (Legacy property supported: "linux,input-wakeup")
 
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
@@ -51,7 +52,7 @@ Example:
 		samsung,keypad-num-rows = <2>;
 		samsung,keypad-num-columns = <8>;
 		linux,input-no-autorepeat;
-		linux,input-wakeup;
+		wakeup-source;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&keypad_rows &keypad_columns>;