Merge branch 'ib-ingenic' of ../linux-pinctrl into devel

1 files changed, 0 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
deleted file mode 100644
index 7988aeb725f4..000000000000
--- a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Ingenic jz47xx GPIO controller
-
-That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
-driver node.
-
-Required properties:
---------------------
-
- - compatible: Must contain one of:
-    - "ingenic,jz4740-gpio"
-    - "ingenic,jz4770-gpio"
-    - "ingenic,jz4780-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
-   ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
-   'gpio.txt' in this directory for more details.
-
-Example:
---------
-
-&pinctrl {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	gpa: gpio@0 {
-		compatible = "ingenic,jz4740-gpio";
-		reg = <0>;
-
-		gpio-controller;
-		gpio-ranges = <&pinctrl 0 0 32>;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <28>;
-	};
-};