diff options
| author | Fabio Estevam <festevam@gmail.com> | 2020-04-09 18:29:42 +0200 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-04-21 13:28:43 +0200 |
| commit | 9429e7072f8ffc1aae4f2a2c4aeee9db847905f5 (patch) | |
| tree | 534bf9784fb9e08837c2c79b35ee0b85e194b518 /Documentation/admin-guide | |
| parent | ff8c2784b057596ae1fe75693046e1ac3382d8bf (diff) | |
media: imx.rst: Fix the MIPI CSI-2 virtual channel
The current instructions for imx6q-sabresd do not lead to functional
capture on OV5640 MIPI CSI-2.
The reason for this, as explained by Steve Longerbeam, is that OV5640 by
default transmits on virtual channel 0, not channel 1 as is given in the
instructions.
Adapt the instructions to use virtual channel 0 so that a working
camera setup can be achieved on imx6q-sabresd.
Also, since we are using an IC direct conversion pipeline, improve
the example by demonstrating colorspace and scaling.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'Documentation/admin-guide')
| -rw-r--r-- | Documentation/admin-guide/media/imx.rst | 31 |
1 files changed, 15 insertions, 16 deletions
diff --git a/Documentation/admin-guide/media/imx.rst b/Documentation/admin-guide/media/imx.rst index 5bb464754379..60f04258902e 100644 --- a/Documentation/admin-guide/media/imx.rst +++ b/Documentation/admin-guide/media/imx.rst @@ -590,30 +590,29 @@ The OV5640 module connects to MIPI connector J5 (sorry I don't have the compatible module part number or URL). The following example configures a direct conversion pipeline to capture -from the OV5640, transmitting on MIPI CSI-2 virtual channel 1. $sensorfmt -can be any format supported by the OV5640. $sensordim is the frame -dimension part of $sensorfmt (minus the mbus pixel code). $outputfmt can -be any format supported by the ipu1_ic_prpenc entity at its output pad: +from the OV5640, transmitting on MIPI CSI-2 virtual channel 0. It also +shows colorspace conversion and scaling at IC output. .. code-block:: none # Setup links media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]" - media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]" - media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]" + media-ctl -l "'imx6-mipi-csi2':1 -> 'ipu1_csi0_mux':0[1]" + media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]" + media-ctl -l "'ipu1_csi0':1 -> 'ipu1_ic_prp':0[1]" media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]" media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]" # Configure pads - media-ctl -V "'ov5640 1-003c':0 [fmt:$sensorfmt field:none]" - media-ctl -V "'imx6-mipi-csi2':2 [fmt:$sensorfmt field:none]" - media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/$sensordim field:none]" - media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/$sensordim field:none]" - media-ctl -V "'ipu1_ic_prpenc':1 [fmt:$outputfmt field:none]" - -Streaming can then begin on "ipu1_ic_prpenc capture" node. The v4l2-ctl -tool can be used to select any supported YUV or RGB pixelformat on the -capture device node. - + media-ctl -V "'ov5640 1-003c':0 [fmt:UYVY2X8/640x480]" + media-ctl -V "'imx6-mipi-csi2':1 [fmt:UYVY2X8/640x480]" + media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/640x480]" + media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/640x480]" + media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480]" + media-ctl -V "'ipu1_ic_prpenc':1 [fmt:ARGB8888_1X32/800x600]" + # Set a format at the capture interface + v4l2-ctl -d /dev/video1 --set-fmt-video=pixelformat=RGB3 + +Streaming can then begin on "ipu1_ic_prpenc capture" node. Known Issues ------------ |