Merge tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
 "Here is the big set of IIO and staging driver patches for 5.14-rc1.

  Loads of IIO driver updates and additions in here, the shortlog has
  the full details.

  For the staging side, we moved a few drivers out of staging, and
  deleted the kpc2000 drivers as the original developer asked us to
  because no one was working on them anymore.

  Also in here are loads of coding style cleanups due to different
  intern projects focusing on the staging tree to try to get experience
  doing kernel development.

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
  staging: hi6421-spmi-pmic: cleanup some macros
  staging: hi6421-spmi-pmic: change identation of a table
  staging: hi6421-spmi-pmic: change a return code
  staging: hi6421-spmi-pmic: better name IRQs
  staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
  staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
  spmi: hisi-spmi-controller: move driver from staging
  phy: phy-hi3670-usb3: move driver from staging into phy
  staging: rtl8188eu: remove include/rtw_debug.h header
  staging: rtl8188eu: remove GlobalDebugLevel variable
  staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
  staging: rtl8188eu: remove RT_TRACE macro
  staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
  staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
  staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
  staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
  staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
  staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
  staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
  staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
  ...

9 files changed, 313 insertions, 230 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio
new file mode 100644
index 000000000000..c9531bb64816
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-iio
@@ -0,0 +1,182 @@
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of scans contained by the buffer.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+			/sys/bus/iio/devices/iio:deviceX/bufferY/length
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Actually start the buffer capture up.  Will start trigger
+		if first device and appropriate.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+			/sys/bus/iio/devices/iio:deviceX/bufferY/enable
+
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory containing interfaces for elements that will be
+		captured for a single triggered sample set in the buffer.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scan element control for triggered data capture.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the scan element data storage within the buffer
+		and hence the form in which it is read from user-space.
+		Form is [be|le]:[s|u]bits/storagebits[>>shift].
+		be or le specifies big or little endian. s or u specifies if
+		signed (2's complement) or unsigned. bits is the number of bits
+		of data and storagebits is the space (after padding) that it
+		occupies in the buffer. shift if specified, is the shift that
+		needs to be applied prior to masking out unused bits. Some
+		devices put their data in the middle of the transferred elements
+		with additional information on both sides.  Note that some
+		devices will have additional information in the unused bits
+		so to get a clean value, the bits value must be used to mask
+		the buffer output value appropriately.  The storagebits value
+		also specifies the data alignment.  So s48/64>>2 will be a
+		signed 48 bit integer stored in a 64 bit location aligned to
+		a 64 bit boundary. To obtain the clean value, shift right 2
+		and apply a mask to zero the top 16 bits of the result.
+		For other storage combinations this attribute will be extended
+		appropriately.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
+KernelVersion:	2.6.37
+Description:
+		A single positive integer specifying the position of this
+		scan element in the buffer. Note these are not dependent on
+		what is enabled and may not be contiguous. Thus for user-space
+		to establish the full layout these must be used in conjunction
+		with all _en attributes to establish which channels are present,
+		and the relevant _type attributes to establish the data storage
+		format.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the maximum number of scan
+		elements to wait for.
+
+		Poll will block until the watermark is reached.
+
+		Blocking read will wait until the minimum between the requested
+		read amount or the low water mark is available.
+
+		Non-blocking read will retrieve the available samples from the
+		buffer even if there are less samples then watermark level. This
+		allows the application to block on poll with a timeout and read
+		the available samples after the timeout expires and thus have a
+		maximum delay guarantee.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+			/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
+KernelVersion: 4.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A read-only value indicating the bytes of data available in the
+		buffer. In the case of an output buffer, this indicates the
+		amount of empty space available to write data to. In the case of
+		an input buffer, this indicates the amount of data available for
+		reading.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+			/sys/bus/iio/devices/iio:deviceX/bufferY/data_available
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 566bd99fe0a5..20fe5afd4f9e 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -57,6 +57,7 @@ Description:
 What:		/sys/bus/counter/devices/counterX/countY/count_mode_available
 What:		/sys/bus/counter/devices/counterX/countY/error_noise_available
 What:		/sys/bus/counter/devices/counterX/countY/function_available
+What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
 What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_available
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -154,6 +155,15 @@ Description:
 		Count Y. If possible, this should match the name of the
 		respective channel as it appears in the device datasheet.
 
+What:		/sys/bus/counter/devices/counterX/countY/prescaler
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configure the prescaler value associated with Count Y.
+		On the FlexTimer, the counter clock source passes through a
+		prescaler (i.e. a counter). This acts like a clock
+		divider.
+
 What:		/sys/bus/counter/devices/counterX/countY/preset
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -193,6 +203,15 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/spike_filter_ns
+KernelVersion:	5.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If the counter device supports programmable spike filter this
+		attribute indicates the value in nanoseconds where noise pulses
+		shorter or equal to configured value are ignored. Value 0 means
+		filter is disabled.
+
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -215,11 +234,45 @@ Description:
 		Read-only attribute that indicates the total number of Signals
 		belonging to the Counter.
 
-What:		/sys/bus/counter/devices/counterX/signalY/signal
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates whether a differential
+		encoder cable fault (not connected or loose wires) is detected
+		for the respective channel of Signal Y. Valid attribute values
+		are boolean. Detection must first be enabled via the
+		corresponding cable_fault_enable attribute.
+
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Whether detection of differential encoder cable faults for the
+		respective channel of Signal Y is enabled. Valid attribute
+		values are boolean.
+
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Filter clock factor for input Signal Y. This prescaler value
+		affects the inputs of both quadrature pair signals.
+
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Signal data of Signal Y represented as a string.
+		Active level of index input Signal Y; irrelevant in
+		non-synchronous load mode.
+
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_available
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Discrete set of available values for the respective Signal Y
+		configuration are listed in this file.
 
 What:		/sys/bus/counter/devices/counterX/signalY/name
 KernelVersion:	5.2
@@ -228,3 +281,31 @@ Description:
 		Read-only attribute that indicates the device-specific name of
 		Signal Y. If possible, this should match the name of the
 		respective signal as it appears in the device datasheet.
+
+What:		/sys/bus/counter/devices/counterX/signalY/signal
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Signal data of Signal Y represented as a string.
+
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configure the counter associated with Signal Y for
+		non-synchronous or synchronous load mode. Synchronous load mode
+		cannot be selected in non-quadrature (Pulse-Direction) clock
+		mode.
+
+		non-synchronous:
+			A logic low level is the active level at this index
+			input. The index function (as enabled via preset_enable)
+			is performed directly on the active level of the index
+			input.
+
+		synchronous:
+			Intended for interfacing with encoder Index output in
+			quadrature clock mode. The active level is configured
+			via index_polarity. The index function (as enabled via
+			preset_enable) is performed synchronously with the
+			quadrature clock on the active level of the index input.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
deleted file mode 100644
index eac32180c40d..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
+++ /dev/null
@@ -1,61 +0,0 @@
-What:		/sys/bus/counter/devices/counterX/signalY/cable_fault
-KernelVersion:	5.7
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read-only attribute that indicates whether a differential
-		encoder cable fault (not connected or loose wires) is detected
-		for the respective channel of Signal Y. Valid attribute values
-		are boolean. Detection must first be enabled via the
-		corresponding cable_fault_enable attribute.
-
-What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable
-KernelVersion:	5.7
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Whether detection of differential encoder cable faults for the
-		respective channel of Signal Y is enabled. Valid attribute
-		values are boolean.
-
-What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
-KernelVersion:	5.7
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Filter clock factor for input Signal Y. This prescaler value
-		affects the inputs of both quadrature pair signals.
-
-What:		/sys/bus/counter/devices/counterX/signalY/index_polarity
-KernelVersion:	5.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Active level of index input Signal Y; irrelevant in
-		non-synchronous load mode.
-
-What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_available
-What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
-KernelVersion:	5.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Discrete set of available values for the respective Signal Y
-		configuration are listed in this file.
-
-What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
-KernelVersion:	5.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Configure the counter associated with Signal Y for
-		non-synchronous or synchronous load mode. Synchronous load mode
-		cannot be selected in non-quadrature (Pulse-Direction) clock
-		mode.
-
-		non-synchronous:
-			A logic low level is the active level at this index
-			input. The index function (as enabled via preset_enable)
-			is performed directly on the active level of the index
-			input.
-
-		synchronous:
-			Intended for interfacing with encoder Index output in
-			quadrature clock mode. The active level is configured
-			via index_polarity. The index function (as enabled via
-			preset_enable) is performed synchronously with the
-			quadrature clock on the active level of the index input.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
deleted file mode 100644
index 7d2e7b363467..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
+++ /dev/null
@@ -1,16 +0,0 @@
-What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
-KernelVersion:	5.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Discrete set of available values for the respective Count Y
-		configuration are listed in this file. Values are delimited by
-		newline characters.
-
-What:		/sys/bus/counter/devices/counterX/countY/prescaler
-KernelVersion:	5.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Configure the prescaler value associated with Count Y.
-		On the FlexTimer, the counter clock source passes through a
-		prescaler (i.e. a counter). This acts like a clock
-		divider.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 6f98b6a9b785..6ad47a67521c 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -455,6 +455,19 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Hardware applied calibration offset (assumed to fix production
 		inaccuracies).
+		icm42600: For this device values are real physical offsets
+		expressed in SI units (m/s^2 for accelerometers and rad/s
+		for gyroscope)/
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
+KernelVersion:  5.8
+Contact:        linux-iio@vger.kernel.org
+Description:
+		Available values of calibbias. Maybe expressed as either of:
+
+		- a small discrete set of values like "0 2 4 6 8"
+		- a range specified as "[min step max]"
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
@@ -652,6 +665,25 @@ Description:
 		Output frequency for channel Y in Hz. The number must always be
 		specified and unique if the output corresponds to a single
 		channel.
+		Some drivers have additional constraints:
+		ADF4371 has an integrated VCO with fundamendal output
+		frequency ranging from 4000000000 Hz 8000000000 Hz.
+
+		out_altvoltage0_frequency:
+			A divide by 1, 2, 4, 8, 16, 32 or circuit generates
+			frequencies from 62500000 Hz to 8000000000 Hz.
+		out_altvoltage1_frequency:
+			This channel duplicates the channel 0 frequency
+		out_altvoltage2_frequency:
+			A frequency doubler generates frequencies from
+			8000000000 Hz to 16000000000 Hz.
+		out_altvoltage3_frequency:
+			A frequency quadrupler generates frequencies from
+			16000000000 Hz to 32000000000 Hz.
+
+		Note: writes to one of the channels will affect the frequency of
+		all the other channels, since it involves changing the VCO
+		fundamental output frequency.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
 KernelVersion:	3.4.0
@@ -663,6 +695,17 @@ Description:
 		specified and unique if the output corresponds to a single
 		channel.
 
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set/get output current for channel Y. Units after application
+		of scale and offset are milliamps.
+		For some devices current channels are used to specify
+		current supplied to elements used in taking a measurement
+		of a different type. E.g. LED currents.
+
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
@@ -1195,16 +1238,12 @@ Description:
 		The name of the trigger source being used, as per string given
 		in /sys/class/iio/triggerY/name.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
-KernelVersion:	2.6.35
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/length
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Number of scans contained by the buffer.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
-KernelVersion:	2.6.35
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/enable
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1212,8 +1251,6 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
-What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
-KernelVersion:	2.6.37
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1224,34 +1261,6 @@ Description:
 		Since kernel 5.11 the scan_elements attributes are merged into
 		the bufferY directory, to be configurable per buffer.
 
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
-What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
-What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
-What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
-KernelVersion:	2.6.37
 What:		/sys/.../iio:deviceX/bufferY/in_accel_x_en
 What:		/sys/.../iio:deviceX/bufferY/in_accel_y_en
 What:		/sys/.../iio:deviceX/bufferY/in_accel_z_en
@@ -1284,23 +1293,6 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Scan element control for triggered data capture.
 
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
-What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
-What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
-What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
-What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
-KernelVersion:	2.6.37
 What:		/sys/.../iio:deviceX/bufferY/in_accel_type
 What:		/sys/.../iio:deviceX/bufferY/in_anglvel_type
 What:		/sys/.../iio:deviceX/bufferY/in_magn_type
@@ -1347,33 +1339,6 @@ Description:
 		If the type parameter can take one of a small set of values,
 		this attribute lists them.
 
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
-What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
-What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
-What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
-KernelVersion:	2.6.37
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_index
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_index
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_index
@@ -1613,8 +1578,6 @@ Description:
 		Specifies number of seconds in which we compute the steps
 		that occur in order to decide if the consumer is making steps.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
-KernelVersion:	4.2
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1633,8 +1596,6 @@ Description:
 		the available samples after the timeout expires and thus have a
 		maximum delay guarantee.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
-KernelVersion: 4.16
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/data_available
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
index 544548ee794c..7fe6935d1448 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
@@ -1,28 +1,3 @@
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Stores the PLL frequency in Hz for channel Y.
-		Reading returns the actual frequency in Hz.
-		The ADF4371 has an integrated VCO with fundamendal output
-		frequency ranging from 4000000000 Hz 8000000000 Hz.
-
-		out_altvoltage0_frequency:
-			A divide by 1, 2, 4, 8, 16, 32 or circuit generates
-			frequencies from 62500000 Hz to 8000000000 Hz.
-		out_altvoltage1_frequency:
-			This channel duplicates the channel 0 frequency
-		out_altvoltage2_frequency:
-			A frequency doubler generates frequencies from
-			8000000000 Hz to 16000000000 Hz.
-		out_altvoltage3_frequency:
-			A frequency quadrupler generates frequencies from
-			16000000000 Hz to 32000000000 Hz.
-
-		Note: writes to one of the channels will affect the frequency of
-		all the other channels, since it involves changing the VCO
-		fundamental output frequency.
-
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
@@ -34,11 +9,3 @@ Description:
 		  out_altvoltage2_name: RF16x
 		  out_altvoltage3_name: RF32x
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute allows the user to power down the PLL and it's
-		RFOut buffers.
-		Writing 1 causes the specified channel to power down.
-		Clearing returns to normal operation.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
index 66b621f10223..a8e04b41d9ff 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
+++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -18,6 +18,8 @@ Description:
 		respectively which simply helper channels containing the
 		calculated difference in the value of stage 1 - 2 and 3 - 4.
 		The values are expressed in 24-bit twos complement.
+		The LED current for the stage is controlled via
+		out_currentY_raw.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
 Date:		May 2016
@@ -35,11 +37,3 @@ Contact:	Andrew F. Davis <afd@ti.com>
 Description:
 		Get and set the resistance and the capacitance settings for the
 		Transimpedance Amplifier during the associated stage.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
-Date:		May 2016
-KernelVersion:
-Contact:	Andrew F. Davis <afd@ti.com>
-Description:
-		Get and set the LED current for the specified LED active during
-		this stage. Y is the specific stage number.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-icm42600 b/Documentation/ABI/testing/sysfs-bus-iio-icm42600
deleted file mode 100644
index 0bf1fd4f5bf1..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-icm42600
+++ /dev/null
@@ -1,20 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
-KernelVersion:  5.8
-Contact:        linux-iio@vger.kernel.org
-Description:
-		Hardware applied calibration offset (assumed to fix production
-		inaccuracies). Values represent a real physical offset expressed
-		in SI units (m/s^2 for accelerometer and rad/s for gyroscope).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
-KernelVersion:  5.8
-Contact:        linux-iio@vger.kernel.org
-Description:
-		Range of available values for hardware offset. Values in SI
-		units (m/s^2 for accelerometer and rad/s for gyroscope).
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
index 22c5ea670971..c476d48d0f82 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
@@ -41,14 +41,6 @@ Description:
 		Get the current light zone (0..4) as defined by the
 		in_illuminance0_threshY_{falling,rising} thresholds.
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
-Date:		May 2012
-KernelVersion:	3.5
-Contact:	Johan Hovold <jhovold@gmail.com>
-Description:
-		Get output current for channel Y (0..255), that is,
-		out_currentY_currentZ_raw, where Z is the current zone.
-
 What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
 Date:		May 2012
 KernelVersion:	3.5
@@ -59,3 +51,6 @@ Description:
 
 		These values correspond to the ALS-mapper target registers for
 		ALS-mapper Y + 1.
+
+		Note that out_currentY_raw provides the current for the
+		current zone.