Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...

2 files changed, 61 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
new file mode 100644
index 000000000000..60c60fa624b2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-ehci_hcd
@@ -0,0 +1,46 @@
+What:		/sys/bus/pci/drivers/ehci_hcd/.../companion
+		/sys/bus/usb/devices/usbN/../companion
+Date:		January 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		PCI-based EHCI USB controllers (i.e., high-speed USB-2.0
+		controllers) are often implemented along with a set of
+		"companion" full/low-speed USB-1.1 controllers.  When a
+		high-speed device is plugged in, the connection is routed
+		to the EHCI controller; when a full- or low-speed device
+		is plugged in, the connection is routed to the companion
+		controller.
+
+		Sometimes you want to force a high-speed device to connect
+		at full speed, which can be accomplished by forcing the
+		connection to be routed to the companion controller.
+		That's what this file does.  Writing a port number to the
+		file causes connections on that port to be routed to the
+		companion controller, and writing the negative of a port
+		number returns the port to normal operation.
+
+		For example: To force the high-speed device attached to
+		port 4 on bus 2 to run at full speed:
+
+			echo 4 >/sys/bus/usb/devices/usb2/../companion
+
+		To return the port to high-speed operation:
+
+			echo -4 >/sys/bus/usb/devices/usb2/../companion
+
+		Reading the file gives the list of ports currently forced
+		to the companion controller.
+
+		Note: Some EHCI controllers do not have companions; they
+		may contain an internal "transaction translator" or they
+		may be attached directly to a "rate-matching hub".  This
+		mechanism will not work with such controllers.  Also, it
+		cannot be used to force a port on a high-speed hub to
+		connect at full speed.
+
+		Note: When this file was first added, it appeared in a
+		different sysfs directory.  The location given above is
+		correct for 2.6.35 (and probably several earlier kernel
+		versions as well).
+
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 294aa864a60a..e647378e9e88 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -142,3 +142,18 @@ Description:
 		such devices.
 Users:
 		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
+Date:		September 2011
+Contact:	Andiry Xu <andiry.xu@amd.com>
+Description:
+		If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device
+		is plugged in to a xHCI host which support link PM, it will
+		perform a LPM test; if the test is passed and host supports
+		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will
+		be enabled for the device and the USB device directory will
+		contain a file named power/usb2_hardware_lpm.  The file holds
+		a string value (enable or disable) indicating whether or not
+		USB2 hardware LPM is enabled for the device. Developer can
+		write y/Y/1 or n/N/0 to the file to enable/disable the
+		feature.