drm/amd/pp: Fix OD feature enable failed on Vega10 workstation cards

As hw required, soc clock must large than mclk, So we set max soc
clock to OD Max Memory clk.
But on workstation, vbios do not support OD feature, the OD max memory
clock is equal to 0. In this case, driver can support underclocking.
and set od max memory clock to the value in highest memory dpm level.
So the od max memory clock should be less than highest soc clock.
and driver should not change the soc clock.

caused by commit ca57b9b0a156
("drm/amd/pp: Allow underclocking when od table is empty in vbios")

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 7 insertions, 2 deletions

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
index f70dbc8ccfba..05e680d55dbb 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
@@ -321,8 +321,12 @@ static int vega10_odn_initial_default_setting(struct pp_hwmgr *hwmgr)
 		odn_table->min_vddc = dep_table[0]->entries[0].vddc;
 
 	i = od_table[2]->count - 1;
-	od_table[2]->entries[i].clk = hwmgr->platform_descriptor.overdriveLimit.memoryClock;
-	od_table[2]->entries[i].vddc = odn_table->max_vddc;
+	od_table[2]->entries[i].clk = hwmgr->platform_descriptor.overdriveLimit.memoryClock > od_table[2]->entries[i].clk ?
+					hwmgr->platform_descriptor.overdriveLimit.memoryClock :
+					od_table[2]->entries[i].clk;
+	od_table[2]->entries[i].vddc = odn_table->max_vddc > od_table[2]->entries[i].vddc ?
+					odn_table->max_vddc :
+					od_table[2]->entries[i].vddc;
 
 	return 0;
 }
@@ -1325,6 +1329,7 @@ static int vega10_setup_default_dpm_tables(struct pp_hwmgr *hwmgr)
 	if (hwmgr->platform_descriptor.overdriveLimit.memoryClock == 0)
 		hwmgr->platform_descriptor.overdriveLimit.memoryClock =
 					dpm_table->dpm_levels[dpm_table->count-1].value;
+
 	vega10_init_dpm_state(&(dpm_table->dpm_state));
 
 	data->dpm_table.eclk_table.count = 0;