Merge master.kernel.org:/home/rmk/linux-2.6-arm

10 files changed, 180 insertions, 64 deletions

diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index fc0555596d6d..0ee34acb8d7b 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -40,6 +40,8 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
+#include <asm/arch/gpio.h>
+
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
 
@@ -179,7 +181,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	/* clear timer 1 */
 	ixp2000_reg_write(IXP2000_T1_CLR, 1);
-	
+
 	while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
 		timer_tick(regs);
 		next_jiffy_time -= ticks_per_jiffy;
@@ -238,35 +240,40 @@ void __init ixp2000_init_time(unsigned long tick_rate)
 /*************************************************************************
  * GPIO helpers
  *************************************************************************/
-static unsigned long GPIO_IRQ_rising_edge;
 static unsigned long GPIO_IRQ_falling_edge;
+static unsigned long GPIO_IRQ_rising_edge;
 static unsigned long GPIO_IRQ_level_low;
 static unsigned long GPIO_IRQ_level_high;
 
-void gpio_line_config(int line, int style)
+static void update_gpio_int_csrs(void)
+{
+	ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
+	ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
+	ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
+	ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
+}
+
+void gpio_line_config(int line, int direction)
 {
 	unsigned long flags;
 
 	local_irq_save(flags);
+	if (direction == GPIO_OUT) {
+		irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
 
-	if(style == GPIO_OUT) {
 		/* if it's an output, it ain't an interrupt anymore */
-		ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line));
 		GPIO_IRQ_falling_edge &= ~(1 << line);
 		GPIO_IRQ_rising_edge &= ~(1 << line);
 		GPIO_IRQ_level_low &= ~(1 << line);
 		GPIO_IRQ_level_high &= ~(1 << line);
-		ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
-		ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
-		ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
-		ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-		irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0;
-	} else if(style == GPIO_IN) {
-		ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line));
+		update_gpio_int_csrs();
+
+		ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
+	} else if (direction == GPIO_IN) {
+		ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
 	}
-		
 	local_irq_restore(flags);
-}	
+}
 
 
 /*************************************************************************
@@ -285,9 +292,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str
 	}
 }
 
+static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
+{
+	int line = irq - IRQ_IXP2000_GPIO0;
+
+	/*
+	 * First, configure this GPIO line as an input.
+	 */
+	ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
+
+	/*
+	 * Then, set the proper trigger type.
+	 */
+	if (type & IRQT_FALLING)
+		GPIO_IRQ_falling_edge |= 1 << line;
+	else
+		GPIO_IRQ_falling_edge &= ~(1 << line);
+	if (type & IRQT_RISING)
+		GPIO_IRQ_rising_edge |= 1 << line;
+	else
+		GPIO_IRQ_rising_edge &= ~(1 << line);
+	if (type & IRQT_LOW)
+		GPIO_IRQ_level_low |= 1 << line;
+	else
+		GPIO_IRQ_level_low &= ~(1 << line);
+	if (type & IRQT_HIGH)
+		GPIO_IRQ_level_high |= 1 << line;
+	else
+		GPIO_IRQ_level_high &= ~(1 << line);
+	update_gpio_int_csrs();
+
+	/*
+	 * Finally, mark the corresponding IRQ as valid.
+	 */
+	irq_desc[irq].valid = 1;
+
+	return 0;
+}
+
 static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
 {
 	ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+
+	ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
+	ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
 	ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
 }
 
@@ -302,6 +350,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq)
 }
 
 static struct irqchip ixp2000_GPIO_irq_chip = {
+	.type	= ixp2000_GPIO_irq_type,
 	.ack	= ixp2000_GPIO_irq_mask_ack,
 	.mask	= ixp2000_GPIO_irq_mask,
 	.unmask	= ixp2000_GPIO_irq_unmask
@@ -338,7 +387,7 @@ static void ixp2000_irq_mask(unsigned int irq)
 
 static void ixp2000_irq_unmask(unsigned int irq)
 {
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET,  (1 << irq));
+	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq));
 }
 
 static struct irqchip ixp2000_irq_chip = {
@@ -375,16 +424,16 @@ void __init ixp2000_init_irq(void)
 	 * our mask/unmask code much simpler.
 	 */
 	for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
-		if((1 << irq) & IXP2000_VALID_IRQ_MASK) {
+		if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
 			set_irq_chip(irq, &ixp2000_irq_chip);
 			set_irq_handler(irq, do_level_IRQ);
 			set_irq_flags(irq, IRQF_VALID);
 		} else set_irq_flags(irq, 0);
 	}
-	
+
 	/*
 	 * GPIO IRQs are invalid until someone sets the interrupt mode
-	 * by calling gpio_line_set();
+	 * by calling set_irq_type().
 	 */
 	for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
 		set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 267ba02d77dc..f39e8408488f 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -141,7 +141,15 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
 		.physical	= IXP4XX_PCI_CFG_BASE_PHYS,
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
+	},
+#ifdef CONFIG_DEBUG_LL
+	{	/* Debug UART mapping */
+		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
+		.physical	= IXP4XX_DEBUG_UART_BASE_PHYS,
+		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
+		.type		= MT_DEVICE
 	}
+#endif
 };
 
 void __init ixp4xx_map_io(void)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 0aa73d414783..e3d8510f4340 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -132,8 +132,8 @@ ENTRY(cpu_v6_switch_mm)
  *	  100x   1   0   1	r/o	no acc
  *	  10x0   1   0   1	r/o	no acc
  *	  1011   0   0   1	r/w	no acc
- *	  110x   1   1   0	r/o	r/o
- *	  11x0   1   1   0	r/o	r/o
+ *	  110x   0   1   0	r/w	r/o
+ *	  11x0   0   1   0	r/w	r/o
  *	  1111   0   1   1	r/w	r/w
  */
 ENTRY(cpu_v6_set_pte)
@@ -150,7 +150,7 @@ ENTRY(cpu_v6_set_pte)
 	tst	r1, #L_PTE_USER
 	orrne	r2, r2, #AP1 | nG
 	tstne	r2, #APX
-	eorne	r2, r2, #AP0
+	bicne	r2, r2, #APX | AP0
 
 	tst	r1, #L_PTE_YOUNG
 	biceq	r2, r2, #APX | AP1 | AP0
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index ec943cad2314..1956af382cd8 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -33,7 +33,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <asm/hardware.h>	/* Pick up IXP42000-specific bits */
+#include <asm/hardware.h>	/* Pick up IXP2000-specific bits */
+#include <asm/arch/gpio.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
index 84634af5cc64..03cbbe1fd9d8 100644
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ b/include/asm-arm/arch-ixp2000/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-ixp2000/ixp2000-gpio.h
+ * include/asm-arm/arch-ixp2000/gpio.h
  *
  * Copyright (C) 2002 Intel Corporation.
  *
@@ -16,26 +16,18 @@
  * Use this instead of directly setting the GPIO registers.
  * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
  */
-#ifndef _ASM_ARCH_IXP2000_GPIO_H_
-#define _ASM_ARCH_IXP2000_GPIO_H_
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
 
 #ifndef __ASSEMBLY__
-#define GPIO_OUT			0x0
-#define GPIO_IN				0x80
+
+#define GPIO_IN				0
+#define GPIO_OUT			1
 
 #define IXP2000_GPIO_LOW		0
 #define IXP2000_GPIO_HIGH		1
 
-#define GPIO_NO_EDGES           	0
-#define GPIO_FALLING_EDGE       	1
-#define GPIO_RISING_EDGE        	2
-#define GPIO_BOTH_EDGES         	3
-#define GPIO_LEVEL_LOW          	4
-#define GPIO_LEVEL_HIGH         	8
-
-extern void set_GPIO_IRQ_edge(int gpio_nr, int edge);
-extern void set_GPIO_IRQ_level(int gpio_nr, int level);
-extern void gpio_line_config(int line, int style);
+extern void gpio_line_config(int line, int direction);
 
 static inline int gpio_line_get(int line)
 {
@@ -45,11 +37,12 @@ static inline int gpio_line_get(int line)
 static inline void gpio_line_set(int line, int value)
 {
 	if (value == IXP2000_GPIO_HIGH) {
-		ixp_reg_write(IXP2000_GPIO_POSR, BIT(line));
-	} else if (value == IXP2000_GPIO_LOW)
-		ixp_reg_write(IXP2000_GPIO_POCR, BIT(line));
+		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+	} else if (value == IXP2000_GPIO_LOW) {
+		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+	}
 }
 
 #endif /* !__ASSEMBLY__ */
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
 
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index 083462668e18..5e56b47446e0 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -27,8 +27,8 @@
  * since that isn't available on the A? revisions we just keep doing
  * things manually.
  */
-#define alignb(addr)		(void __iomem *)((unsigned long)addr ^ 3)
-#define alignw(addr)		(void __iomem *)((unsigned long)addr ^ 2)
+#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
 
 #define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
 #define outw(v,p)		__raw_writew((v),alignw(___io(p)))
@@ -48,6 +48,78 @@
 #define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
 #define insl(p,d,l)		__raw_readsl(___io(p),d,l)
 
+#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readb(alignb(p));		\
+		} else {					\
+			__v = __raw_readb(p);			\
+		}						\
+								\
+		__v;						\
+	})							\
+
+#define ioread16(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readw(alignw(p));		\
+		} else {					\
+			__v = le16_to_cpu(__raw_readw(p));	\
+		}						\
+								\
+		__v;						\
+	})
+
+#define ioread32(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readl(p);			\
+		} else {					\
+			__v = le32_to_cpu(__raw_readl(p));	\
+		}						\
+								\
+		 __v;						\
+	})
+
+#define iowrite8(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writeb((v), alignb(p));		\
+		} else {					\
+			__raw_writeb((v), p);			\
+		}						\
+	})
+
+#define iowrite16(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writew((v), alignw(p));		\
+		} else {					\
+			__raw_writew(cpu_to_le16(v), p);	\
+		}						\
+	})
+
+#define iowrite32(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writel((v), p);			\
+		} else {					\
+			__raw_writel(cpu_to_le32(v), p);	\
+		}						\
+	})
+
+#define ioport_map(port, nr)	___io(port)
+
+#define ioport_unmap(addr)
+
 
 #ifdef CONFIG_ARCH_IXDP2X01
 /*
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
index 901bba6d02b4..52ded516ea5c 100644
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ b/include/asm-arm/arch-ixp2000/platform.h
@@ -138,30 +138,10 @@ struct ixp2000_flash_data {
 	unsigned long (*bank_setup)(unsigned long);
 };
 
-/*
- * GPIO helper functions
- */
-#define	GPIO_IN		0
-#define	GPIO_OUT	1
-
-extern void gpio_line_config(int line, int style);
-
-static inline int gpio_line_get(int line)
-{
-	return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-	if (value) 
-		ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line));
-	else 
-		ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line));
-}
-
 struct ixp2000_i2c_pins {
 	unsigned long sda_pin;
 	unsigned long scl_pin;
 };
 
+
 #endif /*  !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
index 4499ae8e4b44..45a6c6cc29d5 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -14,6 +14,7 @@
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000
+		orrne	\rx, \rx, #0x00b00000
                 movne   \rx, #0xff000000
                 add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
 						@ byte writes used - Big Endian.
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
index 8eeb1db6309d..004696a95bdb 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -69,6 +69,16 @@
 #define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBF2000)
 #define IXP4XX_PERIPHERAL_REGION_SIZE	(0x0000C000)
 
+/*
+ * Debug UART
+ *
+ * This is basically a remap of UART1 into a region that is section
+ * aligned so that it * can be used with the low-level debug code.
+ */
+#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
+#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
+#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+
 #define IXP4XX_EXP_CS0_OFFSET	0x00
 #define IXP4XX_EXP_CS1_OFFSET   0x04
 #define IXP4XX_EXP_CS2_OFFSET   0x08
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 08a46302d265..cc4b5f5dbfcf 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -275,6 +275,7 @@ extern void __iounmap(void __iomem *addr);
 /*
  * io{read,write}{8,16,32} macros
  */
+#ifndef ioread8
 #define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
 #define ioread16(p)	({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
 #define ioread32(p)	({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
@@ -293,6 +294,7 @@ extern void __iounmap(void __iomem *addr);
 
 extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
 extern void ioport_unmap(void __iomem *addr);
+#endif
 
 struct pci_dev;